Question about Polaroid FLM-2632 Television

1 Answer

Nosignal do I need more thats in the box

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 44 Answers
Re: nosignal

You need an outdoor antennae or a cable conection. Mke shure that your connecting cables are in good condition. also check the ("F" fitting, that is the end of the cable that screws on to the back of the tv, sometimes the center wire gets bent and it dosen go into the center conection.

Lou Margo
Allied Electronics

Posted on Dec 07, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

What settings do my Samsung tv need to be on to link a digital cable box

The digital cable box will most likely connect via an HDMI connection. Simply ensure that the SOURCE selection for the set matches up to the HDMI port that the digital box is attached to. There is no need for any kind of channel scan when using this type of connection as the cable box acts as the digital tuner. If you are coming into the set on the coaxial cable line, then that is a different story. Ensure that the digital cable box is turned on, then do a channel scan to locate the channel that the cable box is using to send the signal.

Mar 02, 2015 | Samsung Flat Panel Televisions

1 Answer

Do I need a TV technician for NoSignal Sign on all channels ?

Check all the input connections at it back side for firmness. If all are found OK, contact any service technician to detect the fault. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.

Oct 27, 2014 | LG Flat Panel Televisions

1 Answer

Tv does not respond to any input only shows nosignal to any device

Did the TV's source get changed? If you use the Television remote and find the source or input button which switches between the video sources for your TV such as HDMI, A/V, Television Tuner,, VGA connector or Component video. If your using a cable box that remote only controls the cable box and possibly the TV power and volume but the cable box remote does not change the source input of the TV. Most Cable boxes rebroadcast their video on a specific TV channel and your TV must be set to that channel to receive the signal from the cable box. Let me know if this helps you out.

Aug 20, 2014 | Flat Panel Televisions

1 Answer

My television has apear a message nosignal

What is the source of the TV signal? If your TV signal is over the air, check the cable and the antenna direction. If you use a splitter or amplifier, try a direct connection.

If your source is a set-top box, make sure that the box is on. Next try different cables. Try other sources.

If other sources do not work, you either have a tuner problem or a problem with the input section of the board of the TV.

I hope this helps. For additional information, please add a comment with the model of your TV and the source.

Cindy Wells

Mar 12, 2013 | Flat Panel Televisions

1 Answer

Blue screen with NoSignal message

As the set sys, it gets no input signals at all. Just check the input cables.

Mar 05, 2012 | Vizio VOJ320F1A 32 in. LCD TV

1 Answer

No signal onthe screen

If you are connected to a high definition cable box or satellite tv box you would not need to turn to channel 3 on your television. The television would need to be in the right input either component or hdmi. If someone connected the tv to the cable box or satellite tv box with a coax cable like an antenna cable then the tv channels will be available on channel 3 as well but they will not display in high definition. You change channels with the cable box/satellite tv box remote control. If the above is not correct and you are only connected to an antenna cable and not to a cable box or satellite tv box you will need to complete a channel search from the tv menu. It sounds like you are using a cable box/satellite tv box and that the tv is on the wrong input. If the cable box/satellite tv box is not working (i.e. just a black screen) on your television than that is a different matter entirely.

May 10, 2010 | Samsung LE32R41BD 32 in. HD-Ready LCD...

2 Answers

Do we need a converter box?

If your television does not specifically state that it is a high-definition television, then yes, you need a converter box.

Oct 03, 2009 | X2Gen Flat Panel Televisions

1 Answer

Nosignal when i power it on

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} If you are trying to view the DVD on the Samsung TV, you need to firstly connect the DVD to the appropriate connection on the TV.

Once connected, with a Samsung TV, you need to press the SOURCE button on the TV remote control to view any external sources such as your DVD player.

The ‘NO SIGNAL’ message would indicate there is no signal, if you have not tuned your channels in, this may be the digital tuner you are viewing. Press the source button whilst a DVD is playing in the DVD and see if an image displays.

Jul 16, 2009 | Samsung Flat Panel Televisions

1 Answer

My dtv keep saying nosignal antina hooked up .protron tv was working fine ran scan station. stop playing

dtv needs a strong signal to keep track of the channel. The antenna is good inside the room but tends to be affected for interferences. to catch signal (as in the past with ear rabbit antena) is difficult inside the room. and roof antenna is better but needs a good installation. the cable channels can work digital without the dtv. Is hard to give you any idea besides this ones because i don't know how the set up[ is in your case problem, but i hope i could help you a little. Now if the antenna is rasonable good and still having problems with your channels the suspect the dtv failure.

Apr 24, 2009 | Protron PLTV-26 26 in. HD-Ready LCD...

Not finding what you are looking for?
Polaroid FLM-2632 Television Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Flat Panel Televisions Experts

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

66456 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you a Polaroid Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides