Remote Code I was trying to program my dish remote and could not find the right remote code, any suggestions?

Only if there is provision will the remote work with the codes needed for the DEll and you must verify this code with the Dish remote..

Remote Codes ' MyDISH ' DISH Customer Support

https://www.mydish.com/support/remotecodes

Remote Control Manuals · Program Remote to TV/Other .... remote, product type, and manufacturer below to see the current known remote codes you should try.

My Dish remote needs programming for Sanyo TV ... - Directly

https://www.directly.com/.../dish-network-my-dish-remote-needs-progra...

My Dish remote needs programming for Sanyo TV, Model DP226649. My Dish ... Needcode. Alta asked this ... Dish Network • 16808 answers • 95% helpful. Code is ... Test volume control, if it works you're set ... try 590 it should work. tivosat.

How do I program my dish remote to work for my Sanyo TV.

https://www.directly.com/.../dish-network-how-do-i-program-my-dish-re...

Dish Network. How do I program my dish remote to work for my Sanyo TV. ... entercode 590 press pound then sat Then try to turn tv on and off then try volume.

How do you program a dish network remote to my sanyo tv? ' Ya

Hey there, Cheri Torres with DISH Network Customer Service here. We unfortunately do not have any codes for our DISH network remote controls that will program a Magnavox digital converter box. An option you can try is a power scan which will basically find the code for you in some cases. I will list here for you the instructions for addressing your DISH remote to your converter box. I hope you find these instructions helpful and if you have any other questions feel free to post back here and I would be happy to help.

Instructions for performing a power scan

1. With the desired equipment on, press and hold the AUX Mode button until all mode button back lights illuminate, then release.
2. Press and release the # 2 then the STAR (*) button.
   
3. Press and release the Power button.
4. Press the Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, the equipment will power off.
5. Press the POUND (#) button as soon as the desired equipment powers off. Note: If the code entered is valid for the remote, the mode light flashes three times.

HERE ARE A FEW SUGGESTIONS TO LOCATE A SUITABLE CODE FOR YOUR

VIZIO BLU-RAY PLAYER, MODEL VBR231

1. HITATCHI CODES ~ VIZIO CODES
   WHICH MEANS YOU SHOULD TRY HITACHI BLU-RAY PLAYER CODE(S) LISTED IN THE DISH NET RC MANUAL.
   
2. FROM DISHSUPPORT.COM FORUM:
   Scott Greczkowski
   DISHSUPPORT STAFFhances are the 5.3 remote will not control that Blu-ray player. What will work however is a DISH Network 21.0 remote which not only has a better IR code database, but also is an IR learning remote. This means if the code is not in the remotes database you can teach it to learn all the functions of your Vizio Remote.The DISH 21.0 remote will also work fine with your 622/722.If you can't find a 21.0 remote then please PM me and I can tell you where you can order one. They may also be available from DISH Network directly.

*Configuring your devices with a "UNIVERSAL" Remote can sometimes be a stressful and frustrating experience. But it doesn't hafta be!*

1. 
   

Here are a few general

GUIDELINES TO UNIVERSAL REMOTE CODE SUCCESS

• READ THE ENTIRE INSTRUCTION MANUAL THAT IS INCLUDED WITH YOUR UNIVERSAL REMOTE (OR DOWNLOAD ONE FROM THE VENDOR'S WEBSITE)
• USE THE REMOTES "AUTO CODE SEARCH" FEATURE TO FIND A MATCH TO YOUR DEVICE (IF A DEVICE HAS ONLY PARTIAL FUNCTIONALITY e.g. CHANNEL +/- WORKS, BUT VOLUME +/- DOES NOT= CODE IS NOT THE BEST MATCH FOR YOUR DEVICE)
• PRACTICE PROGRAMMING (AN)OTHER DEVICE(S) IN YOUR HOME TO MASTER THE PROCESS OF PROGRAMMING CODES WITH THEIR MATCHING DEVICES USING YOUR UNIVERSAL REMOTE CONTROL. TRUST ME, IT BUILDS CONFIDENCE, ASSURES THAT THE RIGHT PROCEDURE IS BEING FOLLOWED IN ORDER TO PROGRAM THE REMOTE, AND PROMOTES EXPLORATION OF THE "UNIVERSAL" ASPECT OF THE CONTROLLER.
  
• 
  

ronwright22

I have provided a link for you to Vizio's Website. The information below is for a VSB210WS sound bar. I would go to this link and research your model number and look for the code. You may try the code on this screen to see if it will work. I have also provided a link with instructions on programming your DISH remote to other components.

Vizio Website:

http://www.vizio.com/vsb210ws.html
This is the VSB210WS sound bar.

Programming a Universal Remote to operate the HD Sound Bar System If you own a VIZIO TV with a Universal Remote that uses a 5-digit programming code, you may program a device button with code 31517. This will map the Universal Remote button to operate the HD Sound Bar System as follows: Pictured at right is the VIZIO VUR8P Universal Learning remote.

Ray Calo
DISH Network

You need to call DishNetwork and program the remote. The remote does not know your TV code. Easy fix.

This worked for me. I had to scan down quite a few times but eventually my tv turned off and I set the code with the # button. It may work for you too and save you some money on a UR.

http://www.satellite-tv-planet.com/DishNetworkRemoteControlProgramming.htm
Scan For Device Codes If the code for the device you are programming is not listed in the user manual or on this site, try these steps to scan the remote controls memory for device codes.

1) Turn the power on the device on

2) Select and hold the mode button for which you are programming, such as the TV button, on the remote until you see all the lights of the mode buttons flash. Once you let go, that mode button that you chose should now be blinking. When using the Aux mode button only use the number pad to enter 0 for a second TV, 1 for a second VCR/DVD, 2 for a amplifier, tuner, or cable box. Then press the STAR (*) button.

3) Press the power button on the Dish Network remote control.

4) Repeatedly press the UP or DOWN button on the remote to scan for the correct code (do this slowly so you do not skip over the right code for your device). When the correct code is reached the device will turn off.

5) Press the POUND (#) button to store the code in the Dish Network remote.

6) Press the power button to turn the device back on and try using other buttons on the remote to make sure that they also work. Sometimes the power button will work while others may not.

All you need to do is a manual code search on the dish remote. If it does not respond with the manual code search,the remote your trying to use cannot be used for this TV set,or you will need to upgrade to a differant Dish remote as the code is not programmed into the remote. What happens when you do a manual code search is one by one the remote sends out every single code that is programmed into the remote. Good Luck