Question about Maytag MER6772 Gemini Electric Kitchen Range

1 Answer

Hot Surface Light Indicator on Model MER6770AAW

Our hot surface light indicator is not working and we would like to replace that part. Any suggestions? I lifted up the top and found a part there but can't find the number that was listed on it at any parts lists. It looks like it wouldn't be too hard, but looks can be deceiving. Thanks for your help.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 126 Answers
Re: Hot Surface Light Indicator on Model MER6770AAW

Just give your model number to a parts dealer and part name(hot temp sensor) and he will set you up

Posted on Dec 10, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hot surface indicator light stay on?

One of your surface elements is bad (the hot-element switch that is part of the element is stuck on). If each element has its own hot-light, then you know which element is bad; but if you have just 1 hot-surface indicator, your problem is figuring out which element is bad. That takes an electronic technician with patience and an ohmmeter.

Sep 24, 2014 | Whirlpool RF378LXKS Electric Kitchen Range

1 Answer

Hot surface light will not go out

Here is a tip that I wrote about why the hot surface indicator light will not go out...

Oven Hot Surface Indicator Light stays on

Sep 02, 2010 | Maytag Kitchen Ranges

1 Answer

Hot surface indicator light stays on. the knobs

signs of a faulty hotplate sensor especially if the surface is cold

Mar 21, 2010 | Whirlpool Kitchen Ranges

1 Answer

GE EVOLUTION Glass top. The hot surface(Glass top)

Individual burners, located directly under the cooktop glass, contain a temp sensor which lights up the hot surface lamp when they sense a hot condition. If the light stays on after all burners are cool, one of the sensors has shorted out. The sensors are an integral part of the burner, so the offending burner must be replaced to solve your constant on hot light.

Jul 01, 2009 | GE Kitchen Ranges

1 Answer

I have a new ge range. When I turn on the left

If you could see through the glass, you'd see "temperature sensors" located near the elements. They're very sensitive little guys, and rightly so! Their job is to detect temps and energize the warning light on the cooktop so users won't get burned.

To answer your question... It appears that there is an issue with the front left sensor (and possibly the right as well). The temp warning lamps should NEVER go off immediately. Please call for warranty repair (1-800-GE-CARES). This is an unsafe condition for you and your Family. The warning indicators are there for a reason and should indicate high temp's as long as high temp's are present.



Apr 11, 2009 | GE Kitchen Ranges

1 Answer

The hot surface indicator light remains ON all the time.

Your hot surface indicator light might have a short that causes it to stay on all of the time. If you can, try unplugging it for a little while and plugging it back up. If the light is still on, you have a short. You can still use the stove, but the light staying on will not be any help to you.

Oct 22, 2008 | Frigidaire FEF366EC 30" Freestanding...

3 Answers

Hot surface indicator light won't turn off

The element contains a sensor to detect when the element is hot, these sensors fail. The element will have to be replaced. If there is only one light to indicate hot surface, you will have to determine which element has failed.

May 09, 2008 | Kitchen Ranges

1 Answer

Cooktop light stays on when cool

no your not doing anything wrong. the unit has a fault. you should call your nearest warrenty agent

Mar 08, 2008 | Kenmore 95002 / 95004 Electric Kitchen...

2 Answers

Hot surface indicator

The component that controls the hot surface light is part of the element. If there is a light for each element you just replace that element. If there's one for the whole surface or each side you'll have to figure out which element is causing the problem.

Oct 27, 2007 | Maytag MER6772 Gemini Electric Kitchen...

1 Answer

Surface unit indicator light is always on

Coffy, if you are talking about the hot surface indicator lights, they are controlled by the limiter on the burner itself. When the burner heats up the limiter closes and sends power to the light (hot surface). When the burner cools the limiter is supposed to open cutting power to the hot surface indicator light. They may be stuck closed. If you are talking about the lights on the back panel, that is controlled by the infinate switch itself. Catriver

Oct 09, 2007 | Kenmore 96012 / 96014 / 96019 Electric...

Not finding what you are looking for?
Maytag MER6772 Gemini Electric Kitchen Range Logo

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Kitchen Ranges Experts


Level 2 Expert

283 Answers


Level 3 Expert

2963 Answers


Level 2 Expert

236 Answers

Are you a Maytag Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides