Question about Projection Televisions

1 Answer

Quazar 52' blue conversion doesnt move side to side

I have a 52 inch Quazar that I bought about 5 years ago. After cleaning the inside of the TV it started to shut itself off and when it stayed on the picture had a blue line around it. I tried to align the conversion but the blue conversion will only move up and down and not side to side. I was just wondering what is wrong with it and if I could fix it myself or would I have to take it to a repair shjop and how much would they charge. Thank you

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Quazar 52' blue conversion doesnt move side to side

Its your convergance amps,they have gone yes you can repair yourself if you have soildering iron, the shop will charge you around £100-£150 to do it, where as the amps are only about £15 each. the amps are black boxes with about 18 legs on them ,just look at the part number on them and seach through google to find the cheapest ones

Posted on Dec 06, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a 52" Quasar

Could be anythings wrong with it,must hire a tv troubleshoot and repair.Because doesn't know the causes and the problems was in storage 5 years ago.Tries check all cales wires plugs in connections are tightly connected and no loose connections wires on those PCB boards,might help make the tv it work again.

Dec 07, 2010 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer


Your TV is overheating.. easiest remedy is to point a fan at the back of the TV or... clean the inside of the TV, Im sure its full of dust and stuff... this prevents air circulation inside the TV thus creating more heat...

Jun 19, 2009 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

Blue tint on bottom of screen

I have the same KDF60XS955 sony and have the same problem. I called sony customer support and was told there was a recall on the optical block for this tv. But the recall ended in Dec. of 2008. I was upset that they did not call or send out a notice to me. They should of had my information because I had a different issue that they sent someone out to fix a few years ago. They said it was an expensive fix, like over 1000 dollars. Instead of fixing it they offered me a deal on a smaller tv, a 52 inch sony. I could buy that one at a discount which is about 1100 dollars. I told them that I thought that was the worst deal I have ever heard of. Why would I spend about 4000 dollars for a tv 4 years ago only to be told that I could buy a smaller one today for 1100 dollars more. I said if I bought that 52 inch tv today, what would happen 4 years from today, am I going to be offered an even smaller one for more money again? I thought I was buying a top of the line tv back then, I only wished it would have lasted longer than this. Not happy!

Mar 16, 2009 | Sony KP-46WT500 46" Rear Projection...

1 Answer

Blue Shadow


Dec 20, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

The colour is off and the conversion

You have a problem with the blue and green tubes having a fungus growing across the face of the tube, thus blocking the light/picture. This will cause the color to be way off and the focus as well. Need to have the fluid changed in blue and green tubes. The red never seems to be affected...must be the red wave lenght inhibits the growth of algee or something. Anyway....That's what you need, not the convergance chip STK's. Trust me on this. T.V. tech. for over 20 years...see this ALL the time. Good luck.

Dec 19, 2008 | Philips Magnavox 51MP392H Rear Projection...

3 Answers

RCA 52-inch (rear projection) big screen television

tv worked great, turned it off one day and back on the next and the on light would not come on nor would the tv work, rear projection 52 inch rca

Jun 18, 2008 | RCA P52926 52" Rear Projection Television

1 Answer

Sony 52 inch hd widescreen projection tv

You need to pull the top back off be very carefull that you do not break mirror clean mirror and all 3 tube lenses this should make a diffenrents in picture.

Feb 19, 2008 | Projection Televisions

1 Answer

Cannot move the blue conversion

You got a problem in horizontal alignment in blue. The IC could be defective, or if you allready replaced it you have some resistors burned in circuit. Check all resistors (should be small values 0.4-3.9 ohms and more then 0.5W) It's not big deal. You can fix it easy.

Dec 06, 2007 | Projection Televisions

1 Answer

Zenith M52W56LCD blue spot in center of screen

It could be as simple as dust contamination in the LE or lcd chip. You need a clean room to work on this area of the unit and NOTHING you can do there would make that possible, short of spending a few thousand to build one. Before we added a clean room enviroment we simply pulled the LE and sent it in to PTS - who has one and reinstalled...
In your case take it to a qualified shop and you'll save yourself a lot of grief..

Nov 19, 2007 | Zenith D52WLCD 52" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers


Level 3 Expert

56925 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides