Drying problems why would the dryer suddenly quit drying the clothes?

Manual is here, P10 https://www.searspartsdirect.com/partsdirect/user-manuals/41781912510-KENMORE-DRYER-manual

Is the drum turning ? Is the exhaust duct clear and intake filter clean ?

Fix the water leak first. Got a sun roof? Water in the BCM will cause all sorts of funny things, to included not letting you car start and run. Fix that leak first( Like today or tomorrow), then find your BCM(body control module) , pull it out and remove the cover around it. Wipe it off with a cloth, use a blow dryer and dry it up use the dryer to dry out the plugs also, then wipe it off again with another cloth. You let moisture set in it too long, it could kill it...

Use a bottle of yellow HEET dry gas / GAS DRYER to remove any moisture problem in the fuel.

Clean / replace air filter.

Top off ATF to MAX level.

Clean entire lint hose from back of dryer to outside. If cleaning doesn't help, The heating elements in dryer need to be replaced.

spline is worn. unfortunately a new dryer is in your future. good luck

From the sound of things I would say that your heating element needs replacing, they dont last for ever, its worth while getting a repair man to replace it. your dryer should then work normally. I hope this helps.

Remove the cap but dont remove the wires to it, and clean the mositure inside it..should be totally dry or else it will misfire upon starting the engine.

Check ur oil level. Don't change a thing on the dryer if it's working

Your hair drying may be drawing to many amps depending on the wattage of your dryer