- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the picture getting darker means the lamp has aged and u need to replace it another thing u need ti replace the mirrors in the light tunnel of the light engine they have faded secondly the noise means the colour wheel has aged you need to replace it u will have to replace the whole light engine cos the color wheel comes inbuilt the light engine and u will be ok ontact lg dealer in your area
It could be that your laptop is "smart" so basicly when you have the wireless mouse attached it disables the mousepad. But for more troubleshooting go to Controlpanel----> mouse to figure it out. Keep your head cool and try diffrent things out with logic.
First check bottom and unscrew ball and replace to ensure nothing is stuck to the mouse. then ensure nothign is wrong with the wire. Lastly, go to start, contol panel, and mouse and there may be some settings you need to change
I've had this issue as well.
Step 1) Get a clean piece of paper
Step 2) Flip mouse upside down so the bottom is facing up and the mouse wheel is facing the paper. Roll the mouse on the paper up and down quickly, ensuring the wheel is in direct contact with the paper.
That should clean it. It's a known issue.
Hi, I believe you have to clean your mouse. that's no joke. You have to unscrew it and and clean out al the parts with a toothbrush and tooth-pic.. If that does'nt work. replace mouse with optic mouse.
Good luck.
Mice and keyboards only last so long. Some are better than others; however, its time to get a new one. I suggest you put up about $30 and get a Mouse/Keyboard Wireless set. No wires and no fuss.
Most Gm cars and trucks now days have a hub type bearing assembly. no press or speacial tools are really needed. be careful on instalation because the ABS sensor may be inside bearing. Remove brake caliper and rotor and axle nut. should be 3 or 4 bolts holding the assembly in. They will be very tight and should be tighten back the same.
with mouse controls so cheap and so readily available , why would you bother with cleaning/ pulling it apart
is it wireless mouse ( battery flat) usb mouse ( cable problem) or mouse driver ( stopped working)
×