1) Reset do default the device (rear reset button) 2) Set your PC a IP like 192.168.0.xxx (defaul IP address for DWL-2100 AP is 192.168.0.50) 3) Connecto via browser to 192.168.0.50, defaul login
To set IP address on you PC: goto LAN devices, click properties on your LAN, scroll down and selectInternet Protocol (TCP/IP), click properties, click set followingIP address:
I have a problem with my Colubris installation: As long as the accesspoints are on the same subnet,...
(More)
I have a problem with my Colubris installation: As long as the accesspoints are on the same subnet, everything works fine. When I put an accesspoint on a different subnet, the wireless users (connection via an employers SSID eg. only authentication) get an IP-address and all, but cannot access anything on their LAN. Any ideas? :)
Hi all. I have Thomson TG 585 Wireless Router (802.11g) connected to ADSL, and want to extend the...
(More)
Hi all. I have Thomson TG 585 Wireless Router (802.11g) connected to ADSL, and want to extend the signal by using D-Link DWL-2100AP AirPlusXtremeG. The question is: how can I manage that, and which mode should I use; the AP Repeater or the Access Point, and how? any solution or suggestion is highly appreciated.
Help me -------------------------------------------------------------------------------- I use two...
(More)
Help me -------------------------------------------------------------------------------- I use two Wireless Access point D-Link DWL-3200 point to point mode with WDS with AP. Now it ok. I wnat to get one wireless from DWL-3200. Now I buy DWL-2100AP, Which mode shall i use to get from DWL-3200 to DWL-2100? Please help me.
two dwl2100, one as ap, one as repeater,(ant 14dbi) connecting a dwl 3200 ap via switch with an 18db...
(More)
two dwl2100, one as ap, one as repeater,(ant 14dbi) connecting a dwl 3200 ap via switch with an 18db omnidirectional antenna, connecting new dwl 2100 to that antenna again as repeaters, the last three times didn't work well. device could only connect if the connecting comp is not configured as dhcp...on an other location even with static ip the device tends to shut down automatically and restarts direct after...any idea? i am located in costa rica... developing a wireless network for residential area... thanx nis