Paper jam(Canon BJC 3000)

Hello there
This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Also clean The purge unit, called a spittoon assembly in an HP, Lexmark, Caonon and other inkjet printers, is where the print head assembly parks when not in use, also its other job is to clean and make sure the print head is clean and open for printing.

That is where you'll find the print head assembly parked on top of it.
It also has an electrical pump to milk the print heads and test for ink flow.

So clean all under where the heads are parked and on IP6600D models you can take out the heads just by clipping them out, and then clean well.


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Check the printer lens and make sure the paper is probely inserted. Hope this helps...

Hello

Check within your paper feeder rollers there might be something stuck inside it like paper clips, coins or anything small and solid. If you can find way to open the printer without braking it, that would be nice.

Hope this helps.

The problem you are having is with the print head and not the printer. Unfortunately, with these canon print heads, they are not dated, so it is possible to install a print head that was bought new and sealed, but is still dried out because it is old.

Try running the print head through one deep cleaning cycle, this sometimes will start to get an old print head flowing.

Deep cleaning cycle can be found by going to PRINTERS , right clicking on the BJC icon, selecting PROPERTIES from the drop down menu, and then selecting the MAINTAINENCE tab.

Check to make sure that the ink tank in the print head isn't dry. Even a new print head can have a dry tank if it's old.

Drivers for the BJC-300are no longer available.

make sure the papers are aligned when you put them into the printer

If the CHARGE/ERROR light is remain on orange with beep 1 times, it mean the paper is not properly set in the feed slot, just remove the paper and reload it properly.
If the POWER light is flashing green, that mean your print job is not finish yet.

YBC (/\)

Has the software for the printer been installed in your computer? Sorry if this sounds like a silly question, but I did the same thing, and it turned out I hadn't installed the software yet so it didn't recognize the printer.

According to this link (select Frequently Asked Questions, then the first item listed), the seller is correct for Windows Vista. For Windows 2000 or Windows XP, you can get the drivers at this link.

Go to this link. Select Windows XP in the Select OS box. Download the driver and follow instructions to install the driver. Do not connect or turn on the printer until the installation program tells you to do so.