Question about Projector Accessories

1 Answer



Posted by on

1 Answer


I replaceed my Benq PB6110 Lamp and the focus is not clear
on the display it was very clear prior to the replacement, now its very hard or not readiadle at all. How can I make the ajustment.

Posted on Jan 19, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Nec lt220 status light 6 times

sorry, i did not get your idea, expecting for your details

Dec 30, 2011 | Sony XL5300 Replacement Lamp for XBR2 SXRD...

1 Answer

I have a LT60LPLK lamp and I wanted to know how I could test it, outside of the projector, to see if it works.

Don't even think about because lamp is supplied with high voltage and You can get snapped realy badly as well You can blow ballast if you short something

Bad idea!!!

Aug 20, 2011 | NEC LT60LPK Projector Lamp for LT220,...

1 Answer

Cant clear lamp usage hours warning after replacing bulb on model NEC LT 157

Try holding the off button down for 20 seconds, it may be the on button. I had an NEC MT830 which had a standby function once it had reached and exceeded the lamp life safe limit. Once this had happened it wouldn't come out of stanby uinless the lamplife was reset. Your user manual should have the correct method of reset

Good luck, hope I was of assistance

Jul 14, 2011 | NEC LT157 Projector Lamp Module (50021668)...

1 Answer

I have an NEC VT470. The projector shut down after the lamp finished. When I replaced the lamp and pressed the start button, the projector does not come back on.

Some of the NEC units have a standby status when the lamplife has exceeded its safe limit, the unit I had needed the off button pressing for up to 20 seconds to reset the lamplife and allow the unit to be switched back on. There should be info for this in your manual.

Good luck

Jan 14, 2011 | NEC (VT75LP) Projector Lamp for VT470,...

1 Answer

How to replace and reset NEC lamp LT60LP


Aug 28, 2010 | NEC LT60LP Projector Lamp for LT240,...

1 Answer

Lamp and user's manual for a NEC Multisynch MT Projector

The manual can be downloaded here:
The part number for the replacement lamp is MTLAMP600/800 and it may be ordered from

Mar 02, 2009 | NEC (SPPL1063) Projector Lamp for MT600,...

1 Answer

Unlock keypad on lt240 projector

If you do not know the password, then NEC can unlock the keypad after you show proof of ownership by providing the purchase receipt. Other than that it only be resolved by taking the projector to an authorized service repair center with the purchase receipt. This is the safety feature NEC employs to ensure they are providing service for the owner and to deter theft. It is a frustrating and expensive process but well worth knowing that if a projector is ever stolen, the projector basically is locked from use. Expect to pay over $200 to unlock the keypad if you take it to a repair center.

Oct 20, 2008 | NEC LT60LPK Projector Lamp for LT220,...

1 Answer

NEC Lt240 prblem

Hi 80camaro

You could check in the Service Menu if your RGB is the same percentage and at the same run rate.

The run rate is normally 45-60 and the percentage on 50.

I would however recommend that you take it to a NEC agent to get it serviced.

If this doesn't fix it , then you will be looking at a new Mainboard.

Thanks for using Fixya and good luck.

Apr 29, 2008 | NEC LT60LPK Projector Lamp for LT220,...

2 Answers

NEC projector LT220 - replaced bulb, works for 1.5 hrs then switches itself off

Hi Matt

There might be a couple of reasons for this problem.

Best is to start with the lamp - return the lamp to whoever you bought it from and insist on a another new one.

If the problem still occurs you should rather take the unit to a repairer - because it could be the Mainboard or the Ballast ( lamp's powersupply ) that is faulty and will need replacement or repair.

Check if your unit is under warranty - because the replacement of a Mainboard is quite expensive.

Apr 04, 2008 | NEC LT60LPK Projector Lamp for LT220,...

Not finding what you are looking for?
Projector Accessories Logo

Related Topics:

379 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projector Accessories Experts


Level 3 Expert

2236 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5327 Answers

color wheel light...
color wheel light...

Level 2 Expert

137 Answers

Are you a Projector Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides