Cannot fix the angle of the seat (Frog), the large white buttons at the hinge get stuck once pressed, tried lubricating, but still would not become unstuck.
Re: Cannot fix the angle of the seat (Frog), the large...
Email to bugaboo to describe your problem they will ask for the serial number of the pram and your address & send you a repair kit (new white buttons) - for free!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The large white square buttons have to be pushed inward to release the seat / carry co, the side opposite the brake lever has a small safety switch that has to be slid forward before you can press it in. If it's still stuck use some silicon spray to lubricate the buttons than use brute force. I man is useful for this *-)
The chassis is locked by the seat or bassinet unit clicking down onto the black prongs that stick up from the central hubs. It would be mechanically impossible for the front wheel assembly to swing back if the seat was fully engaged into the hub as it has a large plastic block that fits into the hubs to lock them. Remove the seat check for any obvious damage, spray some silicone spray on the prongs and the square white lock buttons. Wipe of excess with a paper towel than try to fit seat again.
Not sure if you mean the handle is locked up and won't move or the seat is locked up and won't move? The front and rear wheel units are locked by the seat unit. The handle has two release buttons that have to be opperated at the same time to release the handle. The seat tilts by pressing the large white buttons on the side. Let me know what part is not working and I'll try to help.
I would suggest that you return this for a repair to your retailer, if this is in warranty (2 years).
If not, you can dismember the white (retangle) buttons quite easily to enable the release of the seat frame,. On each button there is a small clip either side that you have to push in together. Inside each button is a spring, just make sure that you keep the spring for when you have put it back together. It does sound like the spring has just become dislodged.
×