Question about HP PSC 1315 All-In-One InkJet Printer

1 Answer

Printer When I turn my PSC1315 on, it prints a test page. What can I do to fix this?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 82 Answers
Re: Printer

After this page is printed, put this on the scanning glass and press scan button, to complete calibration process...

Posted on Dec 07, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Lexmark wireless printer 1400 series prints blank pages

Try to re-seat the cartridges in the printer. Open the printer cover > remove the cartridges > close the printer cover > re-brick you printer by pulling out the power supply - black box behind the printer where the power cord is plugged in, and re-plug after 10 seconds. When the printer turns on, reinsert the cartridges and close the cover. Try to print a document again to verify that the problem is fixed.

If that doesn't help, the problem could be due to a clogged print cartridge nozzle. Please follow the steps below to fix print quality issues with your model:

  1. On your computer, go to Start menu.
  2. Go to Programs.
  3. Go to Lexmark Z1400 Series folder.
  4. Select Lexmark Solution Center.

From the Maintenance tab, select Clean to fix horizontal streaks. Your printer will then print a page forcing ink through to clean the print cartridge nozzles.

After printing the test page, try to print a document again to verify that the problem is fixed.

Jan 22, 2012 | Lexmark Z1420 Printer

1 Answer

Prints test copy every time I switch it on.

All right so you are getting print test copy every time you turn on or switch on your printer. You can follow the following steps to fix this issue:-

1.. Turn off the printer and wait 10 seconds. Turn it on again

2. Let the printer print the test page.

3. After the test page is printed, disconnect the USB cable connecting the printer to your computer. DO NOT turn off the printer while disconnecting the USB cable.

4. Place the test page on the scanner glass and press the SCAN button on the printer. The ON light will flash as the page is being scanned.

5. Remove the test page when the ON light is steady.

6. Finally, turn off the printer and wait another 10 seconds. Then turn it on again. No more printing test pages! Yay!

(You may now reconnect the printer to your computer via the USB cable.)

let me know if it fix this issue and helpful to you.

Mar 03, 2011 | HP PSC 1510 All-In-One InkJet Printer

2 Answers

Samsung clp-315 printer stops printing after half page

You'll probably have to replace the exit sensor (lots of people have this problem). Go to YouTube and watch this video: 5fJHykzkfww

You can get the part on eBay for about $10 and it's a fairly simple 15 minute fix.

Sep 22, 2009 | Samsung CLP 315 Laser Printer

1 Answer

Printing very very slow 1 page about 10 minutes

go to your printer/print settings/preferences adjust your print options there. set your dry time to less. ink usage to less and /or change your print quality to fast normal or draft. in printerpreferences select spool to printer first.

Apr 23, 2009 | HP PSC 1315 All-In-One InkJet Printer

2 Answers

Very slow printing

printer hp laserjet 1020 its working when giving first page to print but after gives second page its take time

Apr 02, 2009 | HP Printers & Copiers

1 Answer

HP PSC1315 Inkjet all in one

Hi vikram70
here you go select your o/s psc1315 and get software and drivers that are compatible with your product and the operating system.

Jan 17, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Cannot align print cartidge on HP PSC 1315

i have the same problem. i think mine centers around the fact that i refuse to spend the money to buy a color cartridge. i believe the alignment sheet must be in full color.
i did find a very strange solution to preventing the alignment page from printing, but i haven't tried it yet.
not a solution, but it might help...

Dec 22, 2008 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

HP psc 1315v (printer, scanner, copier) Will not print

The test page printing out every time it gets turned on is the printer's way of telling you it wants to be calibrated. Lay the test page on the scanner (follow the pictures on the test page) and scan it in. This should fix that problem and the "occasionally after waiting, something prints" problem.

Unfortunately, I don't have an answer to the "E" on the display or check printer cartridge light. Hope this helps!

Sep 06, 2008 | HP PSC 1350v All-In-One InkJet Printer

4 Answers

Printer prints test page each time printer is turned on

There may be something initialised to print a test page everytime it starts, just remove printer, uninstall driver and re start. Re install drivers and connect printer when prompted or when installation has finished. This should revert to default settings.

Jan 07, 2007 | HP PSC 1510 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 1315 All-In-One InkJet Printer Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts


Level 3 Expert

94267 Answers


Level 3 Expert

7983 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides