Question about Insignia IS 20" TV040919 TV

1 Answer

Nothing works and can't turn tv off

When I plug it in and turn it on it won't go off. And, when I plug it in, none of the buttons will work. So the screen is black.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 346 Answers
Re: Nothing works and can't turn tv off - Insignia IS 20" TV040919 TV Standard (CRT) Televisions

Replace relay transistor

Posted on Dec 25, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My RCA Truflat T.V won't turn on and the FPA lock is turned on, I have the original remote. what should i do?

TV won't turn on • Press the TV button. Make sure the TV is plugged in.• Check the wall receptacle (or extension cord) to make sure it is "live" by plugging in something else.• Something might be wrong with your remote control. Press the POWER button on the front of the TV. If the TV turns on, check the remote control solutions on page 26.• The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Lock Fr. Panel in the PARENTAL CONTROL menu and press OK (box won't have check mark).Buttons don't work
• If you're using the remote control, press the TV button first to make sure the remote is in TV mode.• The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Lock Fr. Panel in the PARENTAL CONTROL menu and press OK (box won't have check mark).• Unplug the TV for two minutes and then plug it back in. Turn the TV on and try again.TV turns off unexpectedly • Sleep timer might have been activated. Go to page 24 for instructions.• KidPass might have been activated. Go to page 21 for instructions.• Wake-Up timer turned on the TV and no remote or front panel buttons were pressed for two hours.• Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then
turn on again. If this happens frequently, the voltage in your house may be abnormally high or low.
• Unplug TV. Wait five minutes. Plug it in again.

Sep 16, 2011 | RCA 20F420T 20" TV

1 Answer

Code for a tv remote

if u have a universal remote and none of the codes seem to work after trying all the codes and non still don t work follow these steps

1. make sure the power on the TV is turned on
2 press and hold code button until it flash twice
3 then press the TV mode button until the light flashes the press
4 power button until TV powers off

Feb 13, 2009 | Daewoo DTQ-20U4SC 20" TV

1 Answer

There is a lock on my screen and nothing works

Try holding the display button for 10 seconds, worked for mine, unless the vcr presents a different issue

Nov 10, 2008 | Insignia IS 20" TV040919 TV

2 Answers


I just fixed my celera k12b-c11 tv. All you do is hold the f button and the mute button in for 3o seconds, and your tv will unlock itself.

Sep 26, 2008 | Quasar SP-3235 32" TV

1 Answer

Bad RCA 32 Tube TV

Bad IHVT ( HV transformer ) part # 257805 or ASTI 2078

Dec 11, 2007 | RCA F32650 32" TV

1 Answer

No remote

heidib, if the front of the set has a menu button try going in and autoprogramming your channels, it seems odd that it won`t go above or below channel 2 which tells me none of the other channels are programmed in. Good luck

Nov 27, 2007 | Zenith C27A24T 27" TV

1 Answer

RCA TV stopped working

Time to go to BEST BUY and nuy a better tv

Oct 13, 2007 | RCA 32F531T 32" TV

1 Answer

Buttons on TV or remote not working. Can only cycle through video input options.

It sounds as though the TVs in a demo mode. Has someone recently been over and was playing with the remote. If so go into the menu of the tV set and look for set up and demo mode. Turn off the demo mode. if this doesent help call i-866-427-3946 and talk to the customer service deptartment. Good Luck

Aug 09, 2006 | Apex Digital PF2025 20" TV

Not finding what you are looking for?
Insignia IS 20" TV040919 TV Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66499 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers


Level 3 Expert

6993 Answers

Are you an Insignia Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides