Question about ViewSonic NextVision N4060w 40 in. LCD Television

1 Answer

Viewsonic n4060w I was changing my chanel from the console, then the screen went blank. I can hear sound. I try to view the menu or sources but nothing. I can turn the tv on and it lights up a little but still cannot see anything.

Posted by on

  • 8 more comments 
  • rich86audio Dec 23, 2007

    We run our N4060W 24 hrs a day! The original one lasted about 6 mos, and now this refurbished one that was replaced under warranty, has done the very same thing! A very faint blue screen, no menu, no video, but good sound. The buttons on the right side don't always work now, either

  • Anonymous Feb 10, 2008

    I have the same issue. Did you find a fix for this?

  • I found 3 1000µ power supply caps that were bulging and measured less than 250µ each. I thought that I found the problem, but no change. I have no idea what the various power supply outputs are. The back light is on, but there is no video at all. The channels will change and there is audio. I can't find a schematic or a service manual. Viewsonic has some parts on their site, but the service manual isn't for sale???



    Richard C.

  • Anonymous Mar 10, 2008

    same problem here but I was just watching it when it went off try getting any info from Viewsonic is like pulling teeth my tv is 6 months out of warranty and I cant even get help with finding the parts I was on the phone for an hour and most of that was on hold. do like I am doing and spread the word not to buy anything from Viewsonic.

  • deepfreezevi May 25, 2008

    We bought a Viewsonic N4060W LCD set eighteen months ago and last night the very same thing happened to us.
    No video at all, NOT EVEN a menu screen or any other images at all.
    You CAN tell that the set is turned on because there is audio and pilot light, AND you can tell that the screen is showing video "black" because it does NOT look like the set is OFF.
    But it does not show any picture at all.
    To pay this kind of money for a set and to get burned like this is unbelievable.
    Naturally it's out of warranty at 18 months.


  • pturek Jun 25, 2008

    I have had one of my 4 N4060Ws fail a few months back and now two more dropped within 2 weeks of each other the latest was yesterday. Can you say class action suit?



    Yes I'm almost a year beyond default 1yr (bogus) warranty.

  • BobRayP Oct 26, 2008

    I have the same problem - N4060w responds to buttons & remote. I can change inputs and hear corresponding sound. There is no video display, however, the the backlight is on. I had this TV for about 2 years with no problems, until this....

  • comicstars Nov 05, 2008

    I notice that there's two main defects with this TV, 1st one is yours, the picture will go out but you still hear the sound. The TV still turns on though.



    The 2nd is the other type of problem that i'm having, the TV will not turn on, when you press the power button on either the Remote or from TV all that happens is the green light will blink once.

    Please see other link http://www.fixya.com/support/p449403-vie...

  • Jessica2677 Mar 01, 2009

    I am having the sam eproblem in Maryland with my Viewsonic....I cannot stand their customer service dept...they are clueless.

  • Anonymous Mar 17, 2009

    JAYWARDLTS I looked at shopjimmy.com but all they had was the owner manual for the n4060w.
    If you can find where to buy the inverter board for that set and you are in North Texas I'll bring the darn set to you and pay you to fix it.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

HI I AM A TECH. I WORK FOR A COMPANY THAT REPAIRS LCD TV'S. IF YOU HAVE SOUND AND NO PIC YOU WILL NEED AN INVERTER BOARD THERE IS A WEB SITE CALLED SHOPJIMMY.COM THEY MAY HAVE IT

Posted on Mar 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When turned on screen is black but you can view menu and stored pictures


Since you can see the menus, did you try to go to the setup menu, and adjust the brightness of the screen?
It is in the setup menu, the line under Sound settings. Try to make the display brighter and don't forget to ok that one, because otherwise nothing will be changed. OK with the ok / Func button.

Jan 14, 2014 | Olympus FE-340 Digital Camera

1 Answer

No picture or sound


I know this set pretty well, in fact I think I have the service manual on disc---have about 200 of these sets on disc. I can make some suggestions if you have some mechanical skill etc, I never know how much a person has who posts a question here.

I suspect this set might have a common problem---I would have to dig the disc out to be sure----some of these have a small blue High voltage cap that pops (you might not hear it go) and with it goes a pico fuse---its 2 amp and it will among some other things kill the set except for the power light.

If you have a working remote also call up Menu to see if on screen menu is working, if it shows the cap mentioned is good.

Also you can try one of the rear inputs with a vcr or DVD to see if picture that way.

Let me know if I can help.

SD TECH

Dec 06, 2012 | Hitachi 60SDX88B 60" Rear Projection...

1 Answer

My playstation3 will turn on looks like it is working but my tv screen is blank nothing comes up


Hi,

Try to reset the video settings on the PS3 and also make sure the cables are all attached and that you have the TV on the correct input source.

Turn the PS3 off so the red light is on. Hold down the power button on the PS3 until you hear a beep. Release the power button and press it again.
That should have reset the video settings so you will be able to set the video settings again on the other TV and access the PS3 menu to set it up.


If there is anything else please post back.



Regards.

Dec 09, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

Wii menu will not come on when power is turned on.


Do you hear any sound when you power the console on? I assume it used to work fine? Try disconnecting all cables from the back of the Wii, waiting about 90 seconds, reattach all cables and power on. Does the power light go to green?

Jun 24, 2009 | Nintendo Wii Console

1 Answer

Swicthed on tv and its a blank screen..now it wont switch off.


Can you see the menus on the screen?
Can you hear audio (sound)?
If you can hear sound but no menu we need to check the backlight.
Take a flashlight and shine it on the screen, look very closely at the screen.
Do you see a video image?

Let me know what happens, I can assist further.
lone99star

Jan 09, 2009 | Samsung Televison & Video

2 Answers

Blank Screen


sounds like you need so ship it to sony, they will replace it..............

May 12, 2008 | Sony PlayStation Portable (PSP) Console

4 Answers

Sony Bravia KDL 52 keeps turning itself OFF


i had prob where my sony would switch off for a few secs thenh come back on . The solution was in menu / tv settings / sleep timer . Go into that and make sure its set to off. there are opions for off , 5 min 20 min 30 min etc... mine was set to nothing just blank.

Apr 06, 2008 | Sony BRAVIA KDL-52W3000 52 in. LCD...

1 Answer

Blue screen with sound but nothing else!


I, too, acquired a Phillips without a manual and was experiencing a similar problem. My model is PTV 916, but if your TV has a "source select" button, say a prayer and press the button. From that point, I don't know what else I did, but I do get TV programs now.

Jan 04, 2008 | Philips 50P8341 50" Rear Projection...

1 Answer

No picture on tv screen.


Had the same problem. When I turned on the console, the screen went a bit fuzzy at first and then remained blank. There was no sound either, but I could still turn it off with the controller. I checked all the connections and even plugged it into another T.V. I have now discovered the problem! The scart connector which came with the PS3 wasn't working properly. Didn't have the prob before because I wasn't using it. Hope that this helps. If not, try holding the power button down for a few seconds after turning on the system. You'll hear a beep noise and the system will try to adjust its AV output or something. Worth a try anyway.

Dec 03, 2007 | Sony Playstation 3 (PS3) Console

Not finding what you are looking for?

Open Questions:

0 Answers

Viewsonic n4060w I was changing my chanel from the console, then the screen went blank. I can hear sound. I try to view the menu or sources but nothing. I can turn the tv on and it lights up a little but still cannot see anything. First, I had trouble with turning the TV on/off -- I could turn it on from the unit, but had to turn it off on the remote. Then, the on-screen menus started going haywire in that, as soon as you pressed the menu button, the TV would automatically quickly go through all menus on its own -- so fast, that you couldn't stop it. I had a local TV repairman come and he said that it was either the board for the TV's control buttons, and/or the main board -- which I guess is the inverter board(?). He ordered both from Viewsonic (apparently, anyway), and voila! TV started working again... but only for a week. The new problem was that it wouldn't turn on at all now. So they ordered a replacement for the two boards AND a new power supply. Lo-and-behold, he got a garbled mess to display with the new boards before he put in a new power supply, and deduced that the power supply was not the problem (and returned it). So, he said the new main board that was sent was defective, and ordered another. Today they came and attempted to put in the newly arrived main board, and it was missing capacitors (and, obviously, the TV is not working still). So, they are ordering another. I just sent him a link to an on-line store www.discount-merchant.com who had some parts available, one of which it claims is video board for an N4060W. Holding my breath now, I guess. Viewsonic is a nightmare!

May 27, 2009 | ViewSonic NextVision N4060w 40 in. LCD...

ViewSonic NextVision N4060w 40 in. LCD Television Logo

Related Topics:

1,600 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Televison & Video Experts

Cindy Wells

Level 3 Expert

5416 Answers

The Knight
The Knight

Level 3 Expert

75404 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a ViewSonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...