Question about Portable Televisions

1 Answer

Panasonic pvm2037 When I turn on set a blue banner appears across the bottom of display that lists features on the set. Ive never seen it before and problem it that it wont go away , i unplugged set for days and after minute banner starts running and wont go away. Set works fine just hard to watch it with banner contstntly on.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers
Re: panasonic pvm2037

I just "inherited" one of these sets today.

To turn off the blue banner press "Play" and hold the button for 5 seconds. The banner will go away.

Posted on May 26, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Need a code for a hyundai television serial number 6011604481

HYUNDAI HU-TV2121 processor N403 KALORA HHEN16MD01.Videoprotsesor LA76810A - the very bottom hidden button (right of the circuit), click once highlighted FACTORY. More P + and P-switching options.

HYUNDAI C2910, C2519, C2988
1. Set the volume -0
2. Press the remote button "MUTE"
3. While holding "MUTE", press "MENU" on the front of the TV.
4. On the top right corner will light up the letter "D", and in the left corner shows an adjustable parameter and its value.
5. Pages menu change button "CAL"
Switching parameters conducted green and red buttons on a blue field panel. Change made a yellow and blue buttons on a blue field.

To enter service mode simultaneously press "MENU" and "STANDBY".
Press "MENU" again.

HYUNDAI, ITT 29M03 C2131 chassis CPU M37160M8-064FP
In the main menu code 6, 4, 8, 3.
Tools submenu contains the switch to the next of which is done by putting 6, 4, 8, 3.

HYUNDAI 359, 387, 8FHIFI, CB5373Z, 6578F processor CCU SEL04 / SEL07A
Mode 1: Close contact in the hole near the keyboard and just press "S"
Mode 2: Close contact in the hole near the keyboard and just press "S" again and click on contact. Exodus - LOAD.

HYUNDAI processor SAA1293-03-03 SAA1293A
With remote control TV "Horizon" graphics without clicking "SERVICE", the indicator shows a CH, a paz-click on 'appears OP, then choose the volume of registers numbers "1-4" and numbers "1-9" change bits. Then click on "Memory" (you can also lock the pins 15 and 23 in the control circuit SAA1250). Exodus - POWER OFF.

chassis CCU11 - "•?" (C) (H)
Chassis CCU12 - close contact in the hole near the keyboard and just press "S". Exodus - LOAD.

HYUNDAI chassis M1, ITT, NOKIA, SALORA 6390, 7190, MV4000, PL14 24 101 852 SAT SOLI, 882 SAT SOLI, 885 SAT SOLI processor CCU-SALO-07 (CCU20XX)
entrance "C"> "*"> "O / V"> "#"> "M". Exodus - "power".

HYUNDAI chassis EUROSTEREO-1. DIGIVISION 1963 .. 2, 1971 .. 2, 2 .. N6 processor NES3-... NES2-..
Log "-/--" "MENU" "TV" - for a second. Exodus - POWER OFF.

HYUNDAI chassis STEREO PLUS. 5575SFN, 28T7 processor ST92T93
Entrance - "i" "M" "P +", output - TV.

Gun "AV7 universal" fully fit.
Sign in service "1-/11. (Button with painted upper corner). TV must be turned on and display a feed.
Recommended initial value: V.AMP-027. V.LIN-038. S.COR-020. V.POS-023. H.POS-041.H.AMP-022. P.TILT-013. P.AMP-024. P.CORN-007. GREEN-032. RED-032. BLUE-032. V.BRE-005. LUM.DEL-000. AUDIO-032.OPBYT1-002. OPBYT2-064. OPBYT3-000. PRLOSK-000. RESERVE-000. Writing in memory - click "E".
Memory 24c08 can put a clean, turn on TV it propyshe processor itself.

from electronics-planet .blogspot

Jun 12, 2011 | Hyundai Portable Televisions

1 Answer

Panasonic model ct-27sl14j only clicks when i

This is a common problem on TV sets and it's very often caused by bad electrolytic capacitors (in the main power supply section, possibly elsewhere), so you may want to check these first.

Sometimes there will be visible damage - a bulged or blown out top on a capacitor - these need to be replaced, but sometimes a capacitor can be bad even if there's no visible damage to it and will require voltage measuring across it or paralleling it with a good one to see if it's bad or not.

It may as well be a problem with some other component, i just described one of the problems that often cause such a malfunction in TV sets.


3rq8 (Triarcuate)

Sep 07, 2009 | Portable Televisions

1 Answer

'95 Toshiba CF32E50 TV turns off by itself

there is a microswitch relay it will be a black square box that controls the power from the transformer ive seen those cause that problem before

Apr 24, 2009 | Portable Televisions

1 Answer

Line across screen no video just audio

Horizontal oscillator is toast.Must be repaired by a TV tech in shop

Mar 24, 2009 | Portable Televisions

1 Answer

Can I convert this tv to a digital converter? It has no external connections except for the electric plug. I use for camping and for emergency power loss. Thank you for your help.

I was hoping I'd be able to find a manual or service info in my files once I knew the model, but no luck. So I don't know for sure on your TV, but almost every set Panasonic made had an external antenna connection. They usually used a mini jack, normally on the rear or one of the side panels. If you find a connection on your set, just pick up the appropriate adapter from Radio Shack. (The plug on an antenna cable is called an F-connector, so you can fling about tech terms.)

If this set truly has no external antenna connector, you can still hook a converter box to the set. Get a 75-ohm to 300-ohm converter (also called a balun). This has the threaded F-connector on one end and a length of flat two conductor antenna cable with terminals at the other end. Simply use an alligator clip jumper wire to clip one of the terminals to the TV's built-in rod antenna and turn the set to channel 3 or 4 for the converter box signal.

The bigger problem you might have is if you use this set without an AC power source. I haven't yet seen a converter box that allows you to use a DC power source. They all have built-in supplies and need AC. It might be possible to add a DC input jack to a converter, but I've never tried it.

Hope I've been able to help you. Thanks for asking here!

Mar 11, 2009 | Panasonic Portable Televisions

1 Answer

Horizontal white lines across top of TV screen

Vertical hold circuit is failing.

Check capicitor in vertical hold circuit. You should have solid knowledge of electronics repair before attemping repair. TV's can emmit harmful radiation, and produce voltages up to or in excess of 30kV.

Oct 07, 2008 | Portable Televisions

1 Answer

No sat-go reception

I believe there is a special package that you must have to use this item. Contact directv sales.

Sep 13, 2008 | Directv Sat-Go Portable Satellite TV...

1 Answer

Hannspree 37" with Xbox 360 HD

Try to use a HDMI cable, your component cables may not be usable with your TV.

Apr 20, 2008 | Hannspree (K206-10U1-005) Television

Not finding what you are looking for?
Portable Televisions Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Portable Televisions Experts


Level 2 Expert

136 Answers

The Knight
The Knight

Level 3 Expert

66413 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Portable Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides