I unplugged my motherboard and i cannot figure out how to re-wire it back up i believe i have re-wired the start up wires wrong can anyone help (mothebroard type soltek Sl-75DRV5-C)

Probably they're not back the same way.. the wires I mean.. or even if they are maybe it's broken enough to not let current pass
Get new wires? Or Any chance u got a manual to refer to since it looks something that happens not very often.. like get reference books from reliable-store.com .. I'm kinda sure that's all u need..
Sorry bro, wish I could help more..

Take it to an electronics reapir shop and ask to have the connection re-soldered.

There should be similar small wires plugged into the motherboard. This one will plug in next to them. The layout for which pins to plug these in to is usually printed on the motherboard itself right next to the pins. You might need a magnifying glass and flash light to read them. This wire controls the light on the front of the case that blinks when something is being written to the hard drive.

try pulling the vacumn pipe off the EGR valve

what wires are you referencing?
this is a SATA MOBO with 24 pin power and 4 pin CPU. the wires to front of case are labeled on wire end and MOBO Blue sata is usually primary to Hard drive but should be labled 1,2,3,4. wires in back are USB Keyboar & mouse, lan and speaker

Why are the wires off?

This should be a picture of your motherboard:



The wires to the the multi-colored posts in the lower left in this picture where your wires go. To for led'sI'm still working on the pin-out but there are very small jumpers that are used to enable certain features in windows.

The text should be legible and some only need to be follle to the source. l text that you can use to rind theelectical connectons;

It should look something like this:



Which i got from this fail proof web site, but no pics or docs of your motherboard....yet.

try unplugging them and then see if car starts if so then that is the problem. go on line and look for the wiring dia for both cars with ac and then trace the wires back they may have changed the wireing

check the wires going to the coil two sets on that one I believe they break easily

it might be the button on your system case mine does the same thing i believe it can be a security saftey feature that when the fans stop its safe to restart and some cases come with a back case switch sometimes this needs to flipped to ensure a start now these are a couple ideas the other is a loose lead power button wire is connected wrong inside on mother board or is loose check by opening and looking

the comon colors for usb are [red +5v] [white data -] [green data +] [black ground] and you need pinouts on your mother board also you may have 2 jacks so there is a 9 pin connector on board for external usb jacks, just get the manuel for it on internet but I need the motherboard number and make