-   Have a vintage rotary chrono moonphase and day calandar was jumpy!!!
Virtually makes hour hand jumpy too.
I need a schematic diagram to see how all the bits go together.
Cheers
ian-   Guest
all Calibers are different. If you look on the plate where the stem protrudes from the movement you should see a small button that has a dimple in it to prevent your tweezers from slipping when you push it down to release the stem.
I was reading the battery replacement procedures for the Garmin Forerunner 50 and have an alternate...
(More)
I was reading the battery replacement procedures for the Garmin Forerunner 50 and have an alternate observation.
To remove the spring clip that hold in the battery and plastic, place your thumb over the middle of the spring and gently press and slide the spring in a 7:30 to 1:30 direction. The spring pops out and the battery can be removed. NO PRYING IS NECESARY. Replace the battery. The spring is replaced by setting the 7:30 end in place and then sliding the 1:30 end in to lock it.(similar to the removal but in reverse). I hope this helps!