Displays the waiting message when disc eject or dvd selector is pressed. I have waited 5 or 10 minutes and it does not change... Says YPBPr on the left of message I dont know if that has anything to do with it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It is possible that your optical head has failed and is resulting in the non detection of the data from the cd. Hene the set is not completing the mode and is waiting for the solution.
To replace I would recommend you get help to fit this delicate unit with the required precautions . take an estimate and proceed. Good day
The dealer lock feature was
intended to prevent theft of discs when on display at the retail
location. To shut it off, you press and hold the "stop" button on the
front panel of the player. While holding that, simultaneously press the
"power" button on the remote control. You can release both buttons now.
A message will say "dealer lock off" and now you can eject the disc.
1) Turn on the player with no disc in the tray
Wait till the unit is at the Samsung logo screen.
2) Open then close the tray, wait to see the No-Disc Message in the top Left Corner
3) Now press the REPEAT button on the remote, followed by a five digit code.
In this case Repeat 29334
4) When it works a 1 will appear in the top left corner
5) Press 9 to make it regionless.
6) Press Eject to OPEN to open the disc tray.
7) Press Eject to CLOSE to close the disc tray.
8) Power the unit off
9) Now power the unit on again, it should now read all regions of DVD Disc.
I have the same problem. This works for some people, it didnt work for me. 1. Remove any discs 2. turn the unit off and unplug 3. wait about 20 secs and replug the power cord. 4. turn unit back on .Press dvd button on the remote to take unit to the dvd mode. 5.Using remote enter 76419. The display should say GOODBYE and go off. Press the power botton again to turn on and good luck
The dealer lock feature was intended to prevent theft of discs when on display at the retail location. To shut it off, you press and hold the "stop" button on the front panel of the player. While holding that, simultaneously press the "power" button on the remote control. You can release both buttons now. A message will say "dealer lock off" and now you can eject the disc.
You have chosen the progressive scan option. In this option you will not get a composite video out to your TV using a single cable. you need to switch off this option by connecting the DVD player using three single cables namely Rr, Yy, Bb. this is possible only if you have this input option on your Tv. once you do this you will be able to see the display correctly and do the changes of switching off the progressive option. refer to the manual it is explained
What type of plug from the TV are you hooking up to the sound system? Its has to be a HDMI or a scart. If its not and your using the rca red and white. The reciver has to be on the synth surrond setting or look in the owners manual, it will tell you what setting the reciver has to be on when using a non surround set or hookup