Question about RCA R52WM24 52" HDTV Projection Television

1 Answer


Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers
Re: RCA R52WM24

271852 small signal board, 272082 main input, 271866 fav def

Posted on Dec 05, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My RCA 60in Television is not working. I does not even turn on anymore. Is there anything I can do to fix it. Its a 2006 model and the serial number is E484C105I. Thank you for your help

The most likliest cause is the Deflection power board PSB260. If the power light comes on briefly and goes out three times then the deflection board is the cause. You can get the replacement ITC222A deflection board PSB260 from which has installation instructtions included the board simply plugs in no special tools required.

Aug 23, 2011 | RCA R52WM24 52" HDTV Projection Television

1 Answer

How to remove a RCA model R52WM24 circuit board

See my tip at for help with your problem.

Thanks for using FixYa and for the great rating.


Aug 15, 2011 | RCA Projection Televisions

1 Answer

I have a r52wm24 and have replaced the flyback. The main fuse continues to blow. I have replaced the two diodes on the MID (found faulty), Plugged everything in except the PSD board at MID powers ok. I...

Replace the deflection board you have the same deflection board as the R52WH74 model or the PSB-260 deflection board. You can get replacement deflection boards from and also on ebay.

May 26, 2011 | RCA R52WM24 52" HDTV Projection Television

1 Answer


look for the model number on back of your tv then go on google and type brand and model and part you are looking for e.x Lamp

Feb 08, 2010 | RCA R52WM24 52" HDTV Projection Television

2 Answers

Rca color problem

does the convergence option still appear in the on screen menu or has it disappeared? Let me know and I will assist you

May 28, 2009 | RCA R52WM24 52" HDTV Projection Television

1 Answer


I will need you to look on the rear tag and let me know the chassis number as that model was produced with two different chassis numbers ITC222 and the ATC221 chassis was used, But the chassis number will be on the tag on the rear panel. Please reply to this same post and I will help you locate the power supply board.

Aug 13, 2008 | RCA R52WM24 52" HDTV Projection Television

1 Answer

About rca model r52wm24

Yes I know where you can get the signal board for your model. Go to the following link and leave them a email with your model and chassis number and let them know you need a signal board. They will respond back quickly. they have about any bopard you need for RCA they dont list them all, but inquire, and I am almost positive that they have one.Heres the link.

Jul 29, 2008 | RCA R52WM24 52" HDTV Projection Television

1 Answer

Looking for R52WM24 part

That should be the ITC222 chassis, can you look on the rear of the set and let me know which chassis it has listed on the tag, I should be able to help you out. please respond to this same post.

Jul 19, 2008 | RCA R52WM24 52" HDTV Projection Television

1 Answer

RCA R52WM24 52 in. HDTV convergence IC location

the rca itc222 chasis uses no stk the convergence is controled with transistors... the convergence amp board is located above the main signal board(green board)... it can be identified as the one with several heat sink fins on it. FL231 is related to convergence.. there has been a problem with this fuse when it blows the processor doesnt know it is a projection set so it turns it into a regular tube tv. Here at the shop we have found number one reason this fuse blows is poor solder connection on the flyback. So replace the fuse and reflow the solder connection on the flyback and around that area also the horizontal transistor and then see if that doesnt fix the problem.. if you have an more trouble .....

Feb 29, 2008 | RCA R52WM24 52" HDTV Projection Television

1 Answer

Tv model r52wm24

RCA tvs have to be diagnosed by the Chassis number. Please repost the chassis number and I may be able to help you out.

Feb 09, 2008 | RCA R52WM24 52" HDTV Projection Television

Not finding what you are looking for?
RCA R52WM24 52" HDTV Projection Television Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 2 Expert

397 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides