Question about Multimedia Projectors

2 Answers

InFoucus LP500 Projector

My InFocus LP500 projector has a pinkest image when connected to the Dell C840 laptop. I have update the display driver this did not solve the problem.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: InFoucus LP500 Projector

Thanks to this sight the answer is within....AKA lamp problem above with the answer....Turn the main unit swich off...Press and hold the volume key in the down position and the adjustment key to the down position at the same time....While holding the volume and adjustment key in the down position Swich the main unit to On....This will reset the lamp time to 0000.....

Posted on Sep 22, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 563 Answers
Re: InFoucus LP500 Projector

Hi there

That is 100% faulty cable ! Try another VGA / RGB cable and I can guarantee you that you'll be trouble free.

Posted on Mar 26, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Laptop screen resolution

when u connect to projector.after connecting change your laptop screen resolution and by setting lowest resolution you will see full screen.

Feb 19, 2012 | InFocus LP530V Video Projector 2000 ANSI...

2 Answers

I have a Dell laptop ready to go with my first Power Point presentation. I check the projector out from the library and there are no instructions. I googled instructions and tried the advice: Push Fn and...

Look for the F-key with a square/icon of a laptop. Press FN+This button until you see your screen display show that it will be using your LCD + the output on your computer. Remember you need to hook both the VGA or HDMI out to the projecter as well as the USB cable.

Mar 03, 2011 | InFocus In2102 Projector

1 Answer

First time using infocus 1x projector with this laptop - installed drivers but there is no start up screen on the projector and will not display laptop image.

You have to tell the computer you hooked up an additional external monitor. Lower left on the keyboard you will see a "FN" key. Across the top, your F keys...look for an icon that looks like a monitor. Usually F5, F7 or F8. Hold down the FN key and select the F5 etc key which is the command to display the image through the external port. Doing this once displays image through the projector and laptop. Twice displays image to projector only and three times returns to display only on laptop again.

Jun 19, 2010 | InFocus LP640 Projector Multimedia...

1 Answer

PC expands and shrinks text/images when connected to projector

the resolution doesn't match. go into the menu on the projector and select auto image. this should clear up the resolution prob.

Jun 24, 2009 | InFocus LP 425 Multimedia Projector

1 Answer

Infocus projector 4805 connected to Toshiba laptop

Connect the external display port on your laptop computer to the projection system, and then turn on the projector. For information about connecting external devices to your laptop, see the documentation for your laptop computer.
Set the display resolution of your laptop computer to match the resolution of the projector system. First, on your laptop, open the Display Properties dialog box by using the Display icon in Control Panel, and click the Settings tab. Then, in Screen resolution area, move the slider to adjust the display resolution of your laptop. If you don't know which setting to choose, try 800 x 600 pixels; this is a common setting for many projector systems.

Jan 08, 2009 | InFocus ScreenPlay 4805 Multimedia...

2 Answers

Infocus In24+ driver?

I think projector is do not need driver, i see in the infocus website as long as you connect it to the computer it always display.

please see the details of your infocus here:

and also you can download updates firmware to fix some error display.

May this help, best regards, melnavz

Jan 14, 2008 | ASK Proxima Proxima DP2000S Data Video...

2 Answers

PowerPoint and Projector (InFocus LP640) Incompatability

I am unsure of this from your post, but don't try to hook the projector up to the laptop while either one of them is on. Power both the laptop and the projector off, hook up the projector to the laptop, then power on the projector first then the laptop. If you are already doing this, I apologize for stating the obvious.

Jul 03, 2007 | InFocus LP640 Projector Multimedia...

1 Answer

Multi-media projection without image

A great deal of the time DVD players are very restrictive on outputting to multiple sources due to copyright protection. In my experience, if you use your laptops function keys to toggle output (For example, on my laptop, I hit FUNCTION + F4 to cycle between LCD,LCD+VGA,VGA), you should be able to disable the laptop's LCD display, only outputting via the VGA cable. It's worked for me with my HP VP6111 and Windows XP in the past. Hope this helps!

Jun 19, 2007 | InFocus X1 Multimedia Projector

Not finding what you are looking for?
Multimedia Projectors Logo

Related Topics:

736 people viewed this question

Ask a Question

Usually answered in minutes!

Top Multimedia Projectors Experts


Level 3 Expert

2236 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5327 Answers

Are you a Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides