Cordless Mouse Installation

Hi most cordless mouse or keyboard use a usb adaptor you plug this into a usb port on your computer then press a button usually on the bottom of the mouse and then this connects it with your computer, if you buy them new you should get a installation cd with it and just run this in your computer and you should then have no problems

so to answer your question yes any wireless mouse or keyboard will work with any computer as long as your usb ports are working,

you should have no problems as long as you follow the installation instructions that come with the mouse, follow those and you will be up and running in no time, just remember you need to change the batteries every 6 to 12 months to ensure it keeps working at its best.

let me know if you need further assistance ok

plz rate this solution as i have a whole page of unrated posts, thanks

yes you can use your mouse with laptop to.
For that you need usb wireless or bluetooth dongle for connect wireless mouse to laptop.
Then install cordless mouse driver in laptop then it works fine.
Let me know if you need further assistance.
Thanks.

i have logitech LX 6 cordless optical mouse... it dont work... i put in usb that connecting mouse and then turn on (mouse). The problem is that is worked maybe 2 hours ago...and now dont... can you help???

Normal 0 Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it. This should connect the mouse to the receiver and work properly. If not, try pressing the receiver button and then press the button on the mouse. This should be done whenever you change batteries or glitch. Hope this helps you. Bud

Go to the Logitech website. In the support/downloads are you will find the software & drivers you need to install to your computer. You can download the generic logitech wireless driver & then let the new software determine the model. Hope this helps & please remember to rate my answer. Thanks.

Try disconnecting the mouse ,turn off the computer ,then turn plug back in the mouse and let Vista find it. If that doesn't work go to the control panel and use install new hardware.

in short Yes. however let me explain something. You must leave the wifi connector for the one you are using plugged into your computer, and you must install the drivers for the nano mouse, and leave its wifi connector plugged in as well. this is very simple. The reason for leaving both wifi connectors connected to the computer is because one will allow your keyboard to input data and the other will alow you to move your mouse. the only problem that i know of in this situation is interfearence between the mouse and the keyboard being on different Frequency channels however I dont think you will have this issue. Thank you and I really hope this helps. <---Sorry for the length

A cordless mouse is usually attached to the computer with a USB wireless device that usually comes with the mouse. All you have to do is plug the USB device into an available USB port on the back or front of your computer and you should be ready to go. The device will install itself in most instances. Then you need to make sure that you put batteries into the mouse itself in order for it to work. Sometimes a wireless mouse will come with an installation cd that will assist you in the installation process.

Just go to http://www.logitech.com/index.cfm/mice_pointers/mice/&cl=us,en and look for your mouse by model, choose driver that is appropriate for your windows system and download it, install it and follow the directions, then when you plug in the cordless mouse receiver the driver should be installed and it should work with no further need to do anything else..

Let me know if this helps

Thanks

You probably already done this but try pressing the receiver button and while it is flashing turn the board over and press the small reset/connect button on the bottom of the board and also the reset/connect button on the bottom of the mouse. It should work okay after that. here is hoping that helps. Bud