Question about Sony KP-46S25 TV

1 Answer

Sony KP-46S25 The large mirror (part #407027901?) broke inside the set.  Can it be replaced by just having a glass shop make a mirror the same shape?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers
Re: Sony KP-46S25 - Sony KP-46S25 TV Standard (CRT) Televisions

I don't think so it's curves in.

Posted on Dec 05, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer


Video output section has the fault. Check all the components on the video output section, which can be located at the picture tube base card.

Apr 29, 2012 | Sony KP-46S25 TV

1 Answer

Betty\r\nI have a KP-46S25 that has the colors and

You will need to have a TV tech rework or replace your convergence board. Thanks for asking!

Jun 07, 2010 | Sony KP-46S25 TV

1 Answer

I have a Sony KP-46S25. The screen is cracked. I

There are 2 screens for this set, a protective (outer) screen and a fresnel (inner) screen. Which one needs to be replaced?


Apr 08, 2010 | Sony KP-46S25 TV

1 Answer

I have a KP-46S25 and the standby lights are blinking 9 times and there is no picture on it. Help! Thanks.

check with maufactuer error codes and manual.. probably manual wont say .. seems like an error code.

Dec 15, 2009 | Sony KP-46S25 TV

1 Answer

My Sony KP-46S25 TV is blinking red light and is not turning on, please advise.

Please update this with the blink count. The standby light shouldbe blinking a repeated count with a pause. This will indicate the problem circuit and allow me to provide you with the probable defective part(s).


Jan 07, 2009 | Sony KP-46S25 TV

1 Answer

Sony KP-46S25

You have to find the reason why the fuse is blowing. to do that you have to open the up the TV anyway. try another fuse and see if it burns. fuses blow because there is more current going through it than the fuse amperage can hold. it is probably a burnt resistor.

Nov 28, 2008 | Sony KP-46S25 TV

1 Answer


Sure, you can fine service menu with universal remote control. Just find properly code number for Sony tv.

Aug 11, 2008 | Sony KP-46S25 TV

1 Answer

Sony kp-46s25

It sounds like you are going to need to have the convergence IC's replaced. Not really a hard job, but the job requires the proper tools, soldering skills, and a service manual to get the proper part numbers and to perform convergence alighnment in the service menu after the IC's are replaced. Good Luck

Mar 28, 2007 | Sony KP-46S25 TV

1 Answer


A "Gray Scale" adjustment may solve you problem. If one of the picture tubes is set too high it will cause these RETRACE lines. Then too a weak picture tube might cause this. If the horizontal lines are one color: red, green,or blue then whichever color that is shown would tell you which tube is set too high. Your set has 3 screen controls that control the brightness of each tube. One may need to be turned down a little. Stargazer

Mar 11, 2007 | Sony KP-46S25 TV

2 Answers


If everything else is fine-then the set needs to have the picture size adjusted. Sometimes this happens when there is a power spike. Otherwise you either have a voltage reduction on the curcit the set is plugged into, or your house. Or the power supply is gowing and not putting out enough juice to the set.

Dec 17, 2006 | Sony KP-46S25 TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66623 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides