Question about Office Equipment & Supplies

1 Answer

Paper tray three shows a repair code of 503

Our Aficio 8055 shows a flashing wrench and displays a code 503. We do not get fax confirmations which are connected to the function of draw three.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An user who is expert in 3 categories / brands.

  • Master
  • 1,362 Answers

Check this link under error codes and look for your machine

Posted on Dec 10, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fax not going through-Info code 503 coming up

PHONE LINE DISCONNECTED. Check the phone line with a regular phone.

Feb 26, 2009 | Panasonic Panafax UF-790 Plain Paper Laser...

1 Answer

Paper jambs in the feed. The right side seems to pull down first then just jambs up.

Solution: Remove foreign objects from Rear Tray MP210

Remove foreign objects from Rear Tray When printing, if there is any foreign material (such as a piece of metal or a pencil) in the printer, the printer my be damaged. If there is any foreign material, remove it at once. Follow these instructions to remove foreign objects from the Rear Tray.
  1. Power the printer off.

  2. Open the paper support and confirm that there is not any foreign material in the auto sheet feeder. (If there is any foreign material, remove it by hand or with tweezers.)
Open the scanning unit (printer cover) and confirm that there is not any foreign material in the printer. (If there is any foreign material, remove it by hand or with tweezers.)

Note : After confirming that the scanning unit support < 1 > is fixed into position, release your hands.

Caution: To prevent injury or damaging the unit, avoid touching the inner parts.


  1. Close the scanning unit (printer cover).

    Caution: Be careful not to pinch fingers when closing the cover.

  2. Power the printer on and confirm that the printer operates normally.

    Note: If you cannot remove the foreign material in the above procedure, the printer may require servicing.

Clean The Paper Feed Rollers (Windows) Instructions how to clean the paper feed rollers. If the paper feed rollers become dirty, they may not be able to properly feed paper due to the feed roller's slippage.
If paper does not feed correctly, perform the following to clean the paper feed rollers:
  1. Open the Printers folder.

    - For Windows XP Home Edition : Click/Select 'Start,' 'Control Panel,' 'Printers and Other Hardware,' and 'Printers and Faxes.

    - For Windows XP Professional Edition : Click 'Start' and 'Printers and Faxes.'

    - For Windows Vista : Click 'Start,' 'Control Panel,' 'Hardware and Sound,' and 'Printers.'

    - For Windows 2000 : Click/Select 'Start,' and 'Settings,' then 'Printers.'

  2. Right-click the icon of the printer for paper feed roller cleaning, and select 'Properties' from the displayed list.

  3. Click the 'Maintenance' tab and click 'Roller Cleaning'.

  1. Remove all sheets of paper from the rear tray, then click 'OK'.

  2. Confirm the following message, and click 'OK'.
  1. Note: Clicking 'OK' will activate the paper feed rollers 30 times. This activation will take about 90 seconds. Do not perform other operations until this operation has finished.

  2. Confirm the following message, and click 'OK'.
6efb7a7.jpg After the continuous paper feeding operations in step 5 have finished, load three sheets of plain paper and click 'OK'.

Confirm the following message, and click 'OK'.

Note: The following message is displayed when the paper is fed and ejected.
  1. Click 'OK'.
Roller Cleaning is completed.

Cyber Kaka

Dec 08, 2008 | Canon PIXMA MP210 Photo All-In-One Printer

3 Answers

Ricoh Aficio 2045 error code sc 502

sc 502 is the problem related to tray lift motor .open the backside of the machine ,almost downside u ll find one spring broken .replace tat the tray will start working.

Sep 25, 2008 | Ricoh Aficio 450 Copier

1 Answer

Tray problems

SC501 is a problem with the first tray. Usually comes up if the paper wasn't loaded properly. Turn the power off, reload the paper back into tray 1, and turn the power on again. That should correct the problem.

Jul 31, 2008 | Ricoh Aficio 3025 All-In-One Laser Printer

2 Answers

Panasonic FP 1780 Copier. The copier has a flashing wrench that will not reset. I need advice on resetting the wrench.

Hold down 3 buttons in this order:
Paper Tray (Oval button), Recall (Diamond) and #3.
You should see an F2 in the display.
Enter #5 (Display should be showing F5)
Hit the Print Button. (Display should show C00)
Enter 70. (Display should show C70)
Hit the print button. (Display should show probably a 7 or 8)
Hit the print button again. The print button should go Red for a second and then back to green.

Wrench should be gone.

Next to get out of service mode
Hit Clear / stop button until the display shows F5
Then hold down 3 buttons in this order:
Paper Tray, Recall and the Clear Stop button.

You should now be back to working order.

If you have any questions or need parts, feel free to ask.
Have a good day.
Good luck.
Please remember to leave your rating if I have helped you.

Apr 15, 2008 | Office Equipment & Supplies

1 Answer

Ricoh ft4215 problem

do you get an error code on the display, or does it flash open door/out of toner/out of paper/paper jam or what ?

Mar 13, 2008 | Ricoh Aficio 1515F Plain Paper Laser Fax

1 Answer


i will tell you in general but for every brand still have a little different instruction explained in user manual. ok-iwill start.
1-confirm that you plug the machine to power outlet(electricity)and to phone line also2- confirm that you load the paper inside and you have enough ink.(fax display will show you if there any problem to solve.3- put your document in document tray (face down often).
4-dial the number and wait to hear fax echo--then press start...

Mar 03, 2008 | Office Equipment & Supplies

1 Answer

Comm 503

That is "CS of modem is not able to turn ON during training." It could be a bad SC circuit board, but usually that's a bad line or connection. Get your phone lines checked out by your phone company.
If that doesn't do it, then you'll have to replace the board in the fax machine.

Nov 19, 2007 | Panasonic Panafax UF-490 Plain Paper Laser...

1 Answer

No confirmation sheet

first i need to know if it receives or copies,if it don't.that code is is heat lamp(fuser) problem.

Sep 13, 2007 | Ricoh FAX3800L Plain Paper Laser

1 Answer

Fax confirmation

check the settings in the paper tray. Do you have a manual? Should be info in it to change paper specs.

Aug 23, 2007 | Ricoh FAX5000L Plain Paper Laser

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts


Level 3 Expert

102366 Answers


Level 3 Expert

2237 Answers


Level 3 Expert

78010 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides