Question about Dishwashers

2 Answers

Brandt dishwasher my dishwasher has stopped working AGAIN!!! everytime i call a repair man out they say the temperature re-set needs doing and they fiddle about under the machine, its a built in dishwasher so they take the plinth out underneath, have a fiddle and hey presto it works but i am sick of paying 65 quid for the privilege, i hv asked them what to do but they obviously wont tell me, can you help???

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The lights on my dishwasher are working but It doesn't do anything when I hit start.

Posted on Jul 11, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

Either you heater has a reset button or the Thermostat has one, unplug the machine and have a look, it will be just a small pin type button, probably attached to a long mettle tube (heater). just push it in, once you get it going put some Kettle descaler in the dishwasher and run it through (without dishes) this should solve your problem.

Posted on Dec 05, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can anyone direct me to an operating manual for the Brandt Wine Chiller?


Search Results

    Download brandt wine chiller manual - Google Docs

    https://docs.google.com/document/d/.../edit Google Docs, Sheets, and SlidesLooking for brandt wine chiller manual? Download brandt wine chiller manual.brandt wine chiller manual. User Manuals, Instructions and Guides.We have that ...

    brandt manual Refrigerators Questions & Answers - Fixya

    www.fixya.com > Forum > Tags > brandt manual
    On my Brandt wine cooler at the top is an adjustment control for temperature. ... is amanual for this refrigerator LG top mount ice box service manual Maytag ...

    Free Refrigerator User Manuals ' ManualsOnline.com

Dec 14, 2015 | Refrigerators

3 Answers

Where can I get a manual for a Glory Brandt 8672 currency counter?


Let me set the record straight. Brandt invented the 8672, one of the best machines of all time. Unfortunately it was way over priced. Brandt was in business for over 110 years and then sold out to the employees of the company who then sold out to the DeLaRue company in England. DeLaRue then sold out to Talaris. And, finally, Talaris sold out to Glory two years ago. However, the 8672 stopped production before Glory became the owner. All the above took place over 15 year period. Got all that!!
Now back to your question. What kind of manual do you need? I would need to know the full model and serial number for the correct manual.
If your counter say Brandt on it, that is very old. The newest version has the name Talaris on it. Spare parts can be had, but are very rare and somewhat expensive since the machine is no longer made. Here is a picture of a 8672. Good luck.....
25555021-mse4rmslvyyhbolmu1acj0p1-4-0.jpg

Mar 11, 2015 | Brandt 8672 Note Counter

1 Answer

Brandt aquasafe DFS500WE1


Try resetting the machine to factory settings, most dishwashers have this in their instruction manuals at the rear of the manual. If no luck with this you will need to get a tech in to check the sensors and main board

Jul 15, 2014 | Dishwashers

1 Answer

Brandt interaxio


yes and yes

go to the companys website and click on the contact tab , get the number
then call them

Nov 22, 2013 | Dishwashers

1 Answer

Samsung DMT - 400 delicate light blinking


follow this steps and fix it. God bless you

Heating Element

If lights are flashing on the control panel, the heating element might have burned out. The heating element heats the water up to operating temperature. After a set amount of time if the temperature isn't reached a light on the control panel might start flashing. The heating element can be checked for continuity with an Ohm meter.


Enter your model number to see parts for your dishwasher.
Help me find my model number


Heating Element Assembly

If lights are flashing on the control panel, the heating element assembly might have burned out. The heating element assembly heats the water up to operating temperature. After a set amount of time if the temperature isn't reached a light on the control panel might start flashing. The heating element assembly can be checked for continuity with an Ohm meter.


Enter your model number to see parts for your dishwasher.
Help me find my model number


Check Fault Codes

If the display lights are flashing and there is an error code in the display window, check the wiring diagram and tech sheet in the dishwasher that will provide information on the fault.


Drain Pump

If lights are flashing on the control panel, the drain pump might not be working properly. For two-wire drain pump motors check them for continuity using an Ohm meter. If it's defective You'll need to replace it. Drain pumps are not repairable.


Enter your model number to see parts for your dishwasher.
Help me find my model number


Touchpad and Control Panel

If the lights are flashing on the display the entire touchpad and control panel assembly might be defective. If the display works but the dishwasher functions are all out of synch, or some of the buttons don't respond properly the entire touchpad and control panel might need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number


Touchpad

If the display lights are flickering for no reason, the touchpad might need to be replaced. Sometimes when the touchpad is defective the display lights are flashing randomly.

Jul 09, 2013 | Dishwashers

1 Answer

How to replace a kleenmaid brandt dishwasher door handle


Go to www.espares.co.uk

Look for "Dishwasher Door Handle Opening Pedal" - Genuine spare part for select Blomberg and Hygena dishwashers.

This is the part you need for a Kleenmaid/Brandt DW3 dishwasher.

Jan 22, 2010 | Dishwashers

1 Answer

S5N27B keeps stopping mid cycle


If the cycle doesn't complete, check these:---
Water-heating cycle Many dishwashers heat the wash and/or rinse water to a higher temperature, as the cycle calls for it. In these cycles, the dishwasher pauses after it has filled with water, waiting for the water to reach the pre-set temperature. What happens next, depends, as follows: On some units, the pause is timed and the unit continues after the allotted time. On others, the cycle can't continue until the water reaches the higher temperature. If you have this type of dishwasher and the water isn't being heated (say, because of a problem with the heating element or thermostat), after the unit stops at the heating cycle, it never continues. When you repair the heating-system problem, the "cycle problem" is fixed too. Timer Timers don't often fail. But if every other part of the dishwasher seems to be working properly and the timer knob seems to be stuck in one place--doing one function continuously--the timer may be at fault. Dishwasher timers can't be repaired. If yours is defective, replace it.
This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

Dec 28, 2009 | Bosch Dishwashers

1 Answer

Not heating


The reset button needs to be replaced.  Once it has tripped, it loses it's setting and will trip at a much lower temperature.  This is a standard procedure that LG is telling all their techs to do.

Mar 24, 2008 | LG DLE2532W Electric Dryer

1 Answer

Hotpoint DF32 Dishwasher


I have a similar problem.When the water stops entering,I momentarily turn on my main kitchen cold water tap, and believe it or not,the machine carries on working!!

Nov 04, 2007 | Hotpoint 24 in. DWF32P Free-standing...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

1,602 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

83054 Answers

Brad Brown

Level 3 Expert

17490 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...