Question about Sony KP-53HS30 53" Rear Projection HDTV-Ready Television

1 Answer

Fadded red "video 1'' stuck on in corner

If i change to like video 2 for my xbox while im playin the game i can still see the video 1 in the corner like a fadded red, i cant see it all the time but when im watchin somethin that light colored on the screen i can see it ya kno. thanks for helpin

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers
Re: fadded red "video 1'' stuck on in corner

Your getting video bleed thru the filtering circut that controls this is weak Capacitor most likely.

Posted on Dec 05, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do you get your xbox 360 to play, on a 65'' mitubishi projection tv,its connected but nothing comes on screen when i put a movie in just a blank screen and no sound,if i'm on a channel,the channel...


The Xbox 360 connects to a TV using either

- COMPONENT (red blue green for video, red and white for audio

- COMPOSITE (yellow for video, red and white for audio)


So, if your TV is on a "Channel", it is not on the correct input to view the Xbox 360.

Check the Xbox and verify which cables it is using to connect to the TV. When you find this, follow the cable to the back of the TV and find the input selection. It should be listed as the type and a number (i.e. HDMI 2, COMPONENT 1).

Have the Xbox on. Use the TV remote and use either the INPUT or the MENU options to change the input to the input that matches the port that the Xbox is connected to.

This should make the Xbox work.

When you are done with the Xbox, use the INPUT or MENU to change back to the tuner to watch TV.

Nov 03, 2013 | Mitsubishi WD-73734 73" Television

1 Answer

How do i hook my XBOX-360 up to this tv and get 1080i resolution? Thanks, Mike

You should be able to get 1080i with the Input/DVI port or the component video in ports of the TV. I believe the easiest option will be to set the XBox A/V switch to HDTV and use a component video cable (red, green, blue) from the XBox component out to the TV Component In. (with the audio out going to your TV or speaker system). Turn on the X-box and the My Xbox > System Settings. Then Console Settings > Display and chose the 1080i.

Set the TV Net Command (remote) and the Device settings for the input jack in use (component 1/2). Adjust the A/V menu for the Display before playing long.

Wen you change inputs, you will see a status screen for the settings for the TV input.

I hope this helps.

Cindy Wells

Sep 14, 2010 | Mitsubishi WS-48513 48" Rear Projection...

1 Answer

Curved picture top an bottom

This is a common problem. Your convergence has gone out.

Common symptoms are...

1) 3D Video
2) Warped Video
3) Convergence menu does not adjust the red or blue correctly.

Go here for a solution...

Sep 04, 2009 | Samsung HCN4727W 47" Rear Projection...

1 Answer

Fads to green with spiraling lines

you may have a short in the picture tube. but from your description it sounds like the positor has failed. really hard from your description but if the positor has failed its very cheap to replace..farr64

Apr 27, 2009 | Projection Televisions

1 Answer

How can i get the best picture out of my samsung while im playing a game

Good Day;
The best picture you can get ryanvo2 depends on the use of the TV's input capabilities. It also depends on the games outputs.
In today's world of electronics there are more options than in the past, so it depends on the age of your equipment.
So, let's look at the most five (5) options available; number (1)one being the worst and (5) five being the best:
1.) RF, radio frequency, direct cable or antenna input.
2.) Video input; yellow, red and white cables.
3.) S-Video input, some units may require additional audio cables.
4.) Composite Video, red, green & blue cables.
5.) THE BEST 'HDMI' cable, computer type.
ryanvo2 I hope this was helpful. I hope you have years of game playing enjoyment in front of you.
Good Luck, Big Irish

Jul 08, 2008 | Samsung Projection Televisions

1 Answer

Color issue

Replace 120k resistor on the blue video output module. Resistor is located next to the blue video output transistor (has heat sink). If you replace it with a 1/2 watt carbon type, it will probably never happen again. I recomend the same resistor on the red and green video boards at the same time.

Jun 17, 2008 | Toshiba 57H83 57" Rear Projection HDTV

1 Answer

Emerson LCD HDTV 19 inch won't connect to Xbox 360

Im not an expert on the 360s, but I believe there is a switch or option on them to play them in HD feed. They must be set to play HD as far as I understand.

Dec 26, 2007 | Projection Televisions

1 Answer

Video 1 stuck in the corner of tv.

press the display button on the remote sometimes the button on the sony tvs has a tv symbol with a asterisk in it thats the display button hope this helps...
cheers woodatoni.

Dec 04, 2007 | Sony KP-53HS30 53" Rear Projection...

1 Answer


When the set turns off, does the red timer LED blink on the front of the set? If so, how many times does it blink? The number of blinks corresponds to the reason the set shut down.

Jul 05, 2007 | Sony KP-53V85 53" Rear Projection...

Not finding what you are looking for?
Sony KP-53HS30 53" Rear Projection HDTV-Ready Television Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Projection Televisions Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers


Level 2 Expert

103 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sony Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides