Question about Celestion A-Series Speaker
I'm looking for a tweeter for the A2
both these companys deal with celestion speakers,for replacments go to usspeaker,to have the originals repaired go the speaker doctor.both have 800 #'s.now which to do is a matter of money.also make sure you don't have a blown crossover(its rare for the high & low freq drivers to go at once)this is usualy crossover related.happy hunting.hope this helps.thanx for using fix-ya!!! p.s.(please tell me you did'nt try best buy:) :) :) HAPPY HOLIDAYS!!!!!!!!
Posted on Nov 30, 2008
SOURCE: I had a party last
If you have little kids the center of a tweeter is the perfect place to poke, And wow it dents just like that. Hears a tip. Get some black electrical tape and cut a piece just big enough to fit on the dent, leave a tail piece to hold on to, Then with a quick yank pull the tape directly toward you. this in most cases will pull the dent out clean. There are some cases where leaving the dent may cause distortion in the first harmonic however this is very small so the dent though ugly , presents no problem. THE GREAT OZ.
Posted on Aug 16, 2011
Tips for a great answer:
Jul 26, 2013 | Celestion A2 Speaker
Aug 16, 2011 | Celestion A2 Speaker
May 30, 2011 | Celestion F20 Main / Stereo Speaker
Jan 15, 2011 | Speakers & Subwoofers
Feb 11, 2010 | Celestion A3 Speaker
Jan 21, 2010 | Speakers & Subwoofers
Nov 29, 2008 | Celestion A1 Main / Stereo Speaker
Aug 03, 2008 | Celestion AVF302 Main / Stereo Speaker
Jan 26, 2013 | Celestion AVF302 Main / Stereo Speaker
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: