Question about Toshiba LCDTV/DVD Player 19HLV87

1 Answer

Sound with no picture

TV is turned on with sound, picture, and channel display. Screen goes black after one second. Still able to adjust volume and change channels.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 71 Answers
Re: sound with no picture

The problem is in the backlight try to measure the supply.and replace the inverter.

Posted on Sep 16, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a Protron LCD 26" TV model#LT26CIPI...The tv was working great turned it off on night and in the morning turned it back on to sound but no picture just a Black screen...when you change channels

Since its a LCD take a flashlight and have the room as dark as possible and with the light look to see if a very very faint image of the picture can be seen or not---many of these sets use a "back light" for the brightness and if that's not on.......

Dec 11, 2012 | Protron PD-DVR100 DVD Recorder

1 Answer

My bauhn TV screen stopped working. DVD plays sound but no picture. Can the TV be reset or rebooted

You can try unplugging the units--no picture often means the DVD has a dirty or failed optical unit.

Aug 30, 2012 | DVD & Blu-Ray Players

1 Answer


first use only a coaxcil cable to hook up to tv ;second try using standard colored wire hookup (red/white/yellow if you can0 third make sure all cables are plug in tight and in the right area. If still nothing the try adjusting volume on tv and the dvd recorder before you do any of these things.

Apr 02, 2009 | Cyberhome DVR 1600 DVD Recorder

1 Answer

No picture on tv when i turn on dvd. get split screen black & whi

Give this a try. Using your user's manual, locate the "Configuring your recorder" section. Under this section there will be "System setup - general" subsection. Being that you are unable to see anything on your tv display you will need to use your manual as your display. Press the "SETUP" key on your remote. Once again using your manual as your display, scroll down to "Restore factory settings" and press "ENTER" As long as you are located in North or Central America and using interlaced video outputs you should have your normal display back.
Hope this helps.

Nov 24, 2008 | Protron PD-DVR100 DVD Recorder

1 Answer

Vhs dvd combi panasonic dmr ez47

If you select the HDMI channel to watch a dvd does it do it then, if not disconnect both ends of the scart lead and reconnect or replace. If the scart lead is not in properly this could happen, when you switch on the player and play a disc your tv will automatically switch to the AV/Scart channel, but you are better off manually turning the TV over to the HDMI Hi-Def channel for DVD.

Dec 24, 2007 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

Setting up the chanel on the VCR

RF Output Channel
1-Set TV to Channel 4
2-Insert a prerecoeded tape into the unit
3-Press Source until VCR light is lit
~ if noise is seen on TV screen, press (VCR/TV) on remote
4-Press play> once
5- After a few seconds, press and hold {Play>} on the unit for 3 seconds
~ The RF output channel will change to channel 4 from 3 and you will see a playback picture
~ When a picture does not appear on the TV screen, repeat step 4
6- Press (STOP) to stop plasyback

Sep 02, 2007 | Philips MWD2206 DVD Player/VCR

1 Answer

Same as other poster: Player only plays black and white

It sounds like the circuitry which actuates the color drives for the screen are not working, this would ba analogous to adjusting for a B&W picture on a color TV you have color but the screen shows black and white. I would get a schematic for this set and measure the voltages on the color processor that connects to the screen since you know that the external jack has color. If possible I can help you troubleshoot this, if you need me to help out.

Aug 19, 2007 | Durabrand PDV-705 Portable DVD Player

1 Answer

Dvd/vcr combo,vcr is fine ,but dvd no picture,or sound,disc reads.

Hi There is an I/P button on your player's remote control. Power your player on then press the I/P button on your remote control.

Aug 16, 2006 | Apex Digital ADV3800 DVD Player/VCR

2 Answers

Black Box

i had the same problem with my rca truflat.. i read from a posting of a similar problem with a different tv brand to switch your closed caption options 'off' or set it to a 'cc' option instead of the 't' options.. (this was done through the on-screen menu..) i gave it a try and it worked for my tv.. hope it works for you..

Aug 16, 2006 | RCA 20F610TD TruFlat TV/DVD

Not finding what you are looking for?
Toshiba LCDTV/DVD Player 19HLV87 Logo

Related Topics:

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba DVD & Blu-Ray Players Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

66352 Answers


Level 3 Expert

6993 Answers

Are you a Toshiba DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides