Question about Panasonic KX-T7453 Corded Phone

1 Answer

Remote Access How do I set up my phone so I can check message remotely?Thank you.Ann

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers
Re: Remote Access

When you call in from the outside wait for auto attendant to answer. As soon as the "Thank you for calling" starts, press [*], and your mailbox number. If that does not work you may need to put a [#], 165 before the [*], mail box. This is assuming that most voice mail and auto attendant settings are operational and you have a Panasonic KX-TVS voice mail.
If a live person (not to be confused with the living dead) answers, have them transfer you to voice mail and do the whole [#], 165, [*], your mail box thing.

Posted on Jul 16, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How can I check voicemail remotely?

If your phone allows remote message access then a sticker with a code number is usually on the bottom of the corded phone.

Also depending on you provider there may be an option to set up an answering system that you can access via internet or by calling.

Dec 08, 2015 | Toshiba DKT-3220-SD Corded Phone

1 Answer

How do I retrieve recorded messages from an outside phone?

You can access the answering system remotely by dialing your home telephone number from any touch-tone telephone. To remotely access the answering system
Dial your telephone number from any touch-tone telephone. When the answering system answers, enter the two-digit remote access code (19, unless you have changed it). The answering system automatically announces the number of messages (new or old) if there are any. If there are new messages, the answering system automatically begins to play new messages only. -OR If there are no new messages, the answering system automatically begins to play all old messages. You can also enter the remote commands: Play all messages
1 Press to listen to all messages. If there are new messages, the system plays back only the new messages (oldest first). If there are no new messages, the system plays back all old messages (oldest first). Play new messages
2 Press to listen to new messages only. Delete a message 3 Press during message playback to delete the current message. Delete all old messages
3 Press to delete all old messages. Replay current message or previous message
4 To repeat the message currently playing, press 4 after the answering system plays the day and time the current message was received. To listen to the previous message, press 4 while the answering system is playing the day and time the current message was received. Stop
5 Press to stop playback and recording. Play help menu * 5 Press to listen to a list of remote commands. Skip to next message
6 Press during playback to skip the current message and advance to the next message. Record a announcement
7 Press to record a new announcement. Begin speaking after the long beep. Turn system on or off 0 Press to turn the answering system on or off. Exit
8 or hang up Press to end remote access (the call is terminated). 1. 2. 3. 4.5
0 Answering system Remote access Hang up to end the call and save all messages.
NOTES: If you do not enter a valid remote access code, the system answers the call automatically. If the date and time is not set when a message is recorded, the system announces, "Time and date not set" before the answering system announces the number of messages. If there are no messages in the answering system, the system announces, "You have no message." If there are no new messages in the answering system, when you press 2 to play back new messages, the system announces, "You have no new message." If you pause for more than four seconds during remote access, you hear a help menu listing all features and commands. If there is no command for another 20 seconds, the call ends automatically. If the memory is full, the answering system answers after 10 rings and announces, "Memory is full. Enter the remote access code." Enter your remote access code to access the messages and announcements. When the answering system is turned off, the telephone answers after 10 rings and announces, "Please enter your remote access code."

Mar 13, 2015 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

How do I access my messages when I'm not home

1. Dial your phone number using a touch tone phone.
2 After the greeting message enter your 2 digit remote code.
3. Follow the voice instructions.
4. When finished hang up.

The default remote code is 11
The remote code can be entered or changed on your base station.
To change/set the remote code.
1. (Menue) ---> (0)(6)(3)
2. Enter a 2 digit code ---> (Save) ---> (Off)

Jan 19, 2012 | Panasonic KX-TG5243 Cordless Phone...

1 Answer

How do I access messages when away from home

Hi Helen,
Yes you can access your messages when you are away from home. See attached manual pg 41 for remote access operation.
Call you number from remote phone,when the greeting starts enter your access code ( if you have set one already otherwise use default 11.) The your phone will play the new messages

Nov 03, 2011 | Panasonic KX-TG5632 Phone

1 Answer

Panasonic KX-TG933T 6.0 Lost directions. Need to program phone call in code from outside to retrieve any messages. Can't remember what my code is.... Thank you Ann Marie

If you haven't changed it, the remote access code is 111.

You can download a copy of the manual from the manufacturer's web site at

The remote operation instructions begin on page 37.

Jul 12, 2011 | Phones

1 Answer

How do I access my messages when I am out of town. I have a Panasonic DECT 6.0 Thank you. ginny

Call your phone while you're away, and when your message starts to play enter your remote code. After that, you use the keypad on the phone to control message playback, record a new greeting, etc.

"DECT 6.0" is a generic term for the cordless phone technology, and not your phone model number. You'd find that on a label on the back or bottom of the base unit. Without a specific model I can't look for a manual and give details, but if you have the model listed you can download the manual from Panasonic here. It gives all the steps to set up your remote code and the commands to use. If you have a different model phone you can look for your manual at Panasonic's support page.

For the model listed above, the default remote code is 111. The list of remote commands is

Key Remote command
{1} Repeat message
(during playback)*1
{2} Skip message (during
{4} Play new messages
{5} Play all messages
{6} Play greeting message
{7} Record greeting
{9} Stop recording
Stop playback*2
Start voice guidance*3
{0} Turn answering system
{*}{4} Erase message
currently playing
{*}{5} Erase all messages
{*}{6} Erase greeting
message (during
greeting message
{*}{#} End remote operation
(or hang up)

Maybe this list works for your phone too.

May 31, 2011 | Panasonic KX-TG1033S Cordless Phone

1 Answer

Can I check my messages from a phone outside my home, is it possible to make a remote enquiry? And if so, how does it work?Thanks in advance for your answer. Regards, Joy

Remote Message Retrieval
You can operate your answering system from a remote location using any touch-tone
telephone or the handset.
Remote access away from home
You can check, play, or delete messages, even record a new greeting message when
you are away from home. Additionally, you can turn On or Off your answering system
from a remote location.
Remote access:
1) Call your telephone number and wait for the system to answer. If the answering
system is off, it will answer after about 10 rings and sounds a series of beeps.
2) During the greeting message (or a series of beeps when the answering system is off),
press 0 and enter your PIN code within 2 seconds (see "Setting a PIN Code" in your owners manual.
3) The answering system announces the current time and the number of messages stored
in memory. You hear "To play incoming messages, press zero-two. For help, press onezero".
You will hear a beep.

4) Enter a command within 15 seconds, each command there after must be entered
within 2 seconds. You may select a command from the following chart:
For your convenience
a remote operation
card is provided for
you to use while
away from home, it can be found in the back of your owners manual.
Command Function
0 then 6 Answering System On
0 then 7 Memo Record/Stop **
0 then 8 Greeting Message Record/Stop **
0 then 9 Answer System Off
1 then 0 Help Guidance
Command Function
0 then 1 Repeat a Message*
0 then 2 Playing incoming Messages
0 then 3 Skipping a Message
0 then 4 Deleting a Message
0 then 5 Stop Operation
* For Repeat a Message function, press 0 then 1 within about four seconds to
repeat the previous message, or press 0 then 1 after about four seconds to repeat
the current message.
** For Memo Record and Greeting Message Record function, the first time you enter
the corresponding command, it starts the Recording function. If you want to stop
the recording, press 0 then 7 or 8.

5) After the command has finished, you hear intermittent beeps indicating that the
system is in the command waiting mode. You may enter another command at this
time from the chart above.

6) When you are finished, hang up to exit the system. The answering system
automatically returns to standby.
Your machine automatically has a PIN set of 80.
If you are trying to use remote access from a cellular phone and having trouble: Try changing your tone length on your cell phone to long.

May 25, 2011 | Uniden Cordless Phone

1 Answer

Hello I was wondering how to use the VM acess with my phone. I want to be able to call from a different number and listen to my messages how do I go about doing so

I have a similar model. You need to configure a remote access code on the phone. Then, when you call your phone, you enter the pin after your message starts.

(From the manual)
Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or change answering system settings. The unit's voice guidance prompts you to press certain dial keys to perform different operations.

Remote access code:
A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default
setting is "111".

To prevent unauthorized access to this product, we recommend that you regularly change the remote code.
1 {MENU} {#} {3} {0} {6}
2 Enter the desired 3-digit remote
access code.
3 {SAVE} {OFF}

Below is a link to the manual. The remote access instructions are on page 35.

Mar 05, 2011 | Panasonic KX TG4031 Cordless Phone

1 Answer

Retrieve messages

To connect with your answering system:
1 Dial your telephone number from a touch tone phone. 2 When the system answers, enter your Remote Access Code. The system announces the number of messages and begins message playback. 3 Listen to your messages
Change remote access code Press [*] [#]. Follow prompts to set new code.

Apr 01, 2008 | AT&T 1818 Corded Phone

Not finding what you are looking for?
Panasonic KX-T7453 Corded Phone Logo

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts


Level 3 Expert

94039 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides