Question about Radio Shack Pro-97 Handheld Scanner

1 Answer

Pro-97 scanner recieving problem

My pro-97 scanner will not recieve the local freq's. that i have progammed could it be that of an am/fm mode factor or some other unknown problem etc.

Posted by on

  • Anonymous Dec 27, 2007

    Mine wont receive at all. I've reset it to factory specs and it still wont receive anything. I've read where lots of other people have had this problem.

  • Anonymous Mar 30, 2014

    does the NCSHP have a repeater freq close to Franklin county

×

Ad

1 Answer

Try going to a urban area and scanning the NOAA band. if that works your programming is wrong and there is nothing wrong with your AM/FM base band. also the BNC antenna connector on the inside is notorious for breaking away from the board, nothing a little solder cant handle. Also make sure your local freq's are not Digital

Posted on Dec 05, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Radioshack pro 2067 will not recieve anything


Make sure its your local weather channel, turn squelch to minimum, get your local frequency at www.RadioReference.com ...hope this was helpful...

May 26, 2010 | Radio Shack Pro-2051 Base Scanner

1 Answer

Scanner not picking up local police-Fire freq


Do you still receive NOAA weather frequencies? Sounds like your local agencies have switched from simplex/standard frequency operation to trunking. I suggest you visit www.RadioReference.com to view the latest on active frequencies and systems in your area.

Bill B

May 17, 2010 | Radio Shack Pro-94 Scanner

1 Answer

Problem with PRO-2066 scanner not receiving local 800mhz Motorola trunk system II. It does trunk with the current data channels used (showing the ---- line) but I only hear transmissions on freqs ending...


It is difficult to explain in simple terms but I will try.
Google rebanding.
Some radios can have their firmware updated but I don't think your PRO 2066 can.
Channel numbers and frequencies preprogrammed into your scanner have changed over the past few years.
When a data signal says go to channel X that channel is now Y, but your scanner is still looking for X
Hope this helps

Aug 21, 2017 | Radio Shack Pro-97 Handheld Scanner

1 Answer

Pro95 shows trunked freqs are being received, but no audio...


be foe you can recieve them in a closed mode you must input their talkgroup id if not you will not recieve anythang also remember to set your mode to Mot for motorola, fm is foe conventional, am is for aircraft...ect. in the oppen mode you will pick up everthing and their neighbor that uses the frequency set. hope this helps

Jun 01, 2009 | Radio Shack Pro-95 Handheld Scanner

2 Answers

Pro-94 will not recieve


I would make sure you have
the new frequency # put in scanner
GOOGLE free new scanner frequency #
put in your town and city.

Jan 29, 2009 | Radio Shack Pro-94 Scanner

2 Answers

Frequences


if you take it down to your local radioshack they will usually add freq's for you.

Jan 18, 2009 | Radio Shack Pro-97 Handheld Scanner

1 Answer

1998 Wrangler Sahara - radio not recieving low freq FM Bands


if you are receiving stations on the higher frequencies then your radio is the problem and not your antenna or anything else

Jan 13, 2009 | 1998 Jeep Wrangler

1 Answer

Program prblems


your scanner has an attenuater.it lets you program your scanner to reduce scanners sensitivity .check to see if its on or off.

Jan 06, 2009 | Radio Shack Pro-95 Handheld Scanner

5 Answers

Free scanner frequencies


i recently bought a uniden bc72xlt and had no freqs. found some for my area at these sites.try www.scanner master.com*-frequency resources and home of police and call,www.radioreference.com,www.bearcat1.com,hope some of these sites help you out.

Nov 07, 2008 | Radio Shack Pro-95 Handheld Scanner

1 Answer

No fm reception


look for a button called mode and press that, it should switch it to fm narrow (communications) or fm wide ( fm broadcast stations) or am

Aug 13, 2008 | Icom IC-R5 Handheld Scanner

Not finding what you are looking for?
Radio Shack Pro-97 Handheld Scanner Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Shack Radio Communications Experts

john milligan

Level 3 Expert

514 Answers

Steve

Level 3 Expert

3289 Answers

xxxxxx xxx

Level 3 Expert

4991 Answers

Are you a Radio Shack Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...