Question about Instant Cameras

1 Answer

Camera how do I open this thing!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.

  • Instant Cameras Master
  • 93,799 Answers
Re: camera - Instant Cameras

What make and model camera?

Posted on Jan 16, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

3 Answers

My polaroid 300 camera wont turn on why?

Hi Sophie have u made sure there are fresh batteries in the camera and there is definitely film in there

Aug 14, 2014 | Polaroid 300 Instant Camera - Blue...

1 Answer

Hi I have a provlem, I have a canon xl1 and when I try to open it to tack the mini dv out but the only thing it opens its the door but the mini dv dose not comes out, if someone have some recommendation it...

You have to have a battery attached in order for the camera to eject the tape, also sometimes if you don't open the door all the way it won't eject the tape either. If it's not that the DV deck may be broken and you could send it in to the company or you could pay a local camera repair company to fix it.

Feb 26, 2012 | Canon Instant Cameras

2 Answers

I put a fresh new pack of film into my Fuji film instax 210 camera but only used it to take two pictures. The next day when I tried to take a picture, it came out completely white. Why is that? It is very...

Completely white photos on an Instax, or any instant camera means the film has been exposed somehow. Check to be sure the film door is completely closed, and latched properly. If it is, it's possible, though unlikely, that your camera's shutter is stuck open. It'd be easy to check, simply look at the front of your camera into the lens, and see if you see any mechanical bits, now take a picture and see if you see any of them move - movement means working, no movement means not. If the entire camera back opens (I'm not sure if it does) you can also open it and do the same thing, looking to see if you see light through the camera when you're looking through the lens but not taking a picture - if you do the lense is stuck open. This, however, would require removing and wasting whatever film is remaining in it right now.

Aug 30, 2011 | FUJIFILM Instax 210 Film Camera

1 Answer

Old Program A camera -mirror jammed in open position and shutter will; not open when the shutter release butten is pressed

From what you've given, it sounds like the shutter is fried, or the mechanism jammed - or both. If you're wanting to keep the camera, and use it, you'll need to contact a repair technician and have them take a look at it for a repair estimate - assuming it's able to be repaired. Estimates will run you around $35 most places, if there's no shop near you KEH Camera which has a website is quite good.

The same thing just happened to my Nikon FE, and my estimates have been ranging anywhere from $105-145 to get it fixed, so the decision of whether to repair or replace if really left up to you.

Aug 29, 2011 | Pentax Program A 35mm Film Camera

1 Answer

How do I unload or rewind the film

Not All camera do it the same way.
Some have an electric rewind - usually those that automatically advance the film after each picture. They will have a catch somewhere that lets you open the back - it's normally at the right hand side (as you look at the back) or.. Cameras that you advance the film with a lever under your right thumb usually have a rewind crank at the left hand end of the camera . Generally it is on the top folded into the round thing but sometimes it is on the bottom in a matching place. You unfold the crank so that you can wind the film back into its can. However, You must first operate a little button that will be located in a small recess on the base of the camera - this disengages the wind-on machanism inside the camera so that the film can go the other way. Normally you have to keep this pressed all the time you are winding.
When the film is all in the can you will feel the wind ease off and the noise will change . now you can open the camera. Again this is done in different ways on different cameras, but the commonest is to take the winding crank and pull it upwards as if you are trying to pull it out of the top of the camera. It will come so far than suddenly the back will release and open a short way.
Some cameras have a slider hidden at the right hand end on the side, that looks like a small silver bar that you pull down with your thumb-nail.

Jun 26, 2011 | Canon Instant Cameras

1 Answer

I put the film in my camera backwards(with the tail of the film facing to the left) and i cant get it back out. when i tried pulling up on the rewinder thing part of it snapped off

If it was just the folding lever part of the rewinder which has broken off then you'll need to use a flat bladed screwdriver or the tip of a knife to lever up the rewind knob sufficiently to pull it up and open the camera.

If you've broken any more than that, then your camera is unrepairable. Spare parts are not available for your camera as it's only designed to last for six rolls of film. Even regular Lomo and Holga models are only intended to last for a maximum of twelve films.

Oct 02, 2010 | Lomo BRAND Fisheye 2 Camera UK seller...

1 Answer

When i took pictures at christmas i used fiji film in my camera and when i took to get processed they were all blank. could this have been the film but the kodak also did this can you help me

There are 2 things to check.

First: Put in a cheap film and just press the shutter while the back of the camera is open to see if the film is advancing.

Second: Try pressing the shutter while there is no film in the camera and the back is open to see if the shutters are working correctly.

Apr 29, 2009 | Minolta Instant Cameras

1 Answer

Need to take old film out of camera

Usually when the film is shot (you may get more frames than the indicated 24/36 or whatever on the film canister) it will automatically rewind. If not, there's a button in the bottom of the camera you have to press - or other switch-like thing with a symbol 'o__' for rewinding the film.
Beware not to open the back of the camera before you are surethe film is rewound.

Apr 09, 2009 | Instant Cameras

1 Answer

Lens cover won't open

You should look for "lens cover mechanism" when open camera front cover. This part has defective gears or misaligned some thing internally. Part detail is as under for Sony DCR-DVD653E model.

( 1-787-236-11 ) MOTOR UNIT (LENS BARRIER)

You can have an idea of this part in below exploded view... I hope these info will be useful.


Oct 29, 2008 | Instant Cameras

1 Answer

Polaroid Problems

If your having problems with your camera, for about 20.00 you can buy the same camera on Ebay.

Mar 05, 2008 | Polaroid OneStep AutoFocus Instant Camera

Not finding what you are looking for?

Open Questions:

Instant Cameras Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Instant Cameras Experts


Level 3 Expert

93738 Answers

Steven Wander
Steven Wander

Level 3 Expert

574 Answers


Level 2 Expert

132 Answers

Are you an Instant Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides