Question about Sony Mavica MVC-CD350 Digital Camera

1 Answer

DISC ERROR When I turn ont the camera disc error appears . Then it will beep with errorc; 13-01 . What do I need to do .Paid to much for camera not to work. Thanks and hope you can help me.Mary Jo

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I got solution for this problem.

On your camer on the top go to Set Up.
- scroll down to Disc Tool 1,
- scroll down to Format,
- click to the right and OK.
It should take care of it self for couple of minutes.

P.S I did lost all of the pictures that were on CD.

I hope that I helped some of you. Good Luck!

Posted on Apr 30, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

When i put a tape in to watch,or record,the video camera beeps and C:3123 appears i have tried everything

  1. Turn off the camcorder.
  2. Remove the battery or disconnect the AC power adapter for 60 seconds.
  3. Insert the battery or reconnect the AC adapter.
  4. Turn on the camcorder.
  5. If the error message appears, service may be required.
I found many people saying that they had this error and "smacked" the camera... and then it started working. This would tell us that it is a mechanical error... so, at your own risk, if the above steps don't work, I would try smacking it a bit, maybe something mechanical is "stuck".

Mar 01, 2011 | Digital Cameras

1 Answer

I have Mavica CD-350. All of a sudden when I attempt to format a new disc or re-format over an old one, the format process gets to the end and then beeps with the message "format error" After...

The camera may display a FORMAT ERROR if the inserted media is not formatted or if the media was formatted on a computer. This error may also display if the inserted media is not supported by the camera.
Please make sure that you're using either CD -R disc which does not require formatting or CD -RW disc.
If you're using any other discs like CD +RW, CD+R may arise the error message.
If the issue persists with a new different CD -R disc, service may be required for the Camera.

Jan 19, 2011 | Sony Mavica MVC-CD350 Digital Camera

1 Answer

Hi there i'm having trouble with my sony nw-s703f

the flash memory of your mp3 player is having some trouble so please take it to a repairing center to repair it you can find the sony authorised center from

Jun 11, 2010 | Digital Cameras

1 Answer

When I turn on the camera it beeps and an error that reads lens error, restart camera appears and turns off. How do I fix this problem?


Unfortunately a "lens error" message is not something that you will be able to fix. This error indicates a system failure and requires the camera to be sent in for servicing and repair.

You may find it more cost effective to purchase a new camera as opposed to the repair price on your current camera.

Mar 31, 2010 | Canon PowerShot SD600 Digital Camera

1 Answer

It has a lens error. Everytime the camera is turned on it beeps and clicks constantly. It eventually shuts off after displaying "Lens error, restart camera." on the screen.

This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here:

Apr 23, 2009 | Canon PowerShot SD1100 IS Digital Camera

1 Answer

Cannot view subject in view finding

Solution: Turn the camera on. Put it into camera mode so the lens opens. Then push up on the underside of the lens, you'll see the screen light up and it can now take pictures. This worked for me for a month or two. The problem is that I have to keep pushing harder and harder to get it to turn on, and now it turns back off as soon as I stop pushing. So I have to get a new camera. This is a widespread problem with this camera. I previously paid Panasonic the $162 to fix the zoom freezing up. I'm not paying again.

Oct 24, 2008 | Panasonic Lumix DMC-LZ2 Digital Camera

1 Answer

Coolpix lens opens retracts opens then closes again and lens error appears


When you turn the camera on the lens comes out and has parameters when extending to focus, if the lens does not open fully it sees a problem and then closes.

there are tiny plastic gears inside and may have chipped or a piece of sand got in causing the lens to jamb. "very fragile"

one solution is to ask a camera repair shop how much a lens mechanism would be to replace. (if cost is more than 1/2 of what you paid dont bother)

another solution is to have someone sell your camera on an auction site for parts, to make some money towards another camera purchase

Aug 26, 2008 | Nikon Coolpix L11 Digital Camera

3 Answers

Error message

my camera did the same thing, lens retracts 3 or 4 times, and then proceeded with an error message "turn off and on again". I pressed the power button probably about 10 times, didn't work, so then i gave it a good smack on the top of the frame a few times while repeatedly pressing the power button and it did the trick. Hasn't gave me problems since...hope it helps

Mar 29, 2008 | Sony Cyber-shot DSC-W70 Digital Camera

1 Answer


If this error message appears, turn off the camera and remove the batteries for 30 seconds. Afterwards, reinsert the batteries and turn the camera back on. If this doesn't work, perform a manual reset of the camera. If you need an online manual here is a link with troubleshooting

Aug 17, 2007 | Sony Cyber-shot DSC-W50 Digital Camera

Not finding what you are looking for?
Sony Mavica MVC-CD350 Digital Camera Logo

Related Topics:

416 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Digital Cameras Experts

Larry Spears
Larry Spears

Level 3 Expert

625 Answers

Vish Iyer
Vish Iyer

Level 2 Expert

74 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

Are you a Sony Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides