It says i don't have video capture software

you go phillips webside and modem tv tuner vidio capture card and download software and instaltion to pc and slove the problem

remove & REINSTALL YOUR DRIVER & TRY TO CAPTCHER

Instead use a camera software to uveride the deffect. for example, yahoo chat provides web softwares that would recogise any web cam. alternately search online to acquire web camera media complementary sofwwares.

Assuming that you want to do your video editing in the PC rather than on the tape.


1.Your PC must have video capture device(either built-in or add-on).
2.Properly set your video editing software to able to capture video form your device.
3.Connect your camera to your PC in regular manner,like when you connect it to your TV.
4.Have your camera in PLAYBACK mode.wind the tape to the beginning of the footage you want to capture.
5.Open your editing software.turn on capture mode.
6.Start capture.At the same time,start playing back the footage on the cam.
7.When all footage were captured,click stop capture.
8.Start your editing work.
9.when complete,save it to some uncompressed video format like *.avi for later burning to DVD or converting to other format.



For beginners,I recommend Windows Movie Maker video editing software that should come bundled in almost every computer.It's fast,simple but effective enough for home-movie work.



BTW forget the old-school Linear Editing (on the tape) thing.It's slow,complicate and much less flexible than Non-Linear method.

You need a capture card.

1. Plug fire wire into computer.
2. Plug fire wire into Camera. If camera does not have fire wire you will have to use usb cable instead off fire wire.
   
3. Turn camera on set to VCR/Playback mode.
4. Most cameras will be controlled by computer edit / capture software.
5. Start editing / capture software.
6. If camera is controlled by computer click to capture footage.
7. If no control rewind fotage at camera start playback Then pause playback. Start capture in software then release pause on camera.
8. Wait for end of footage Turn Camera off .
9. Edit footage.
   

There website isn't much help for software. I found this at the bottome of their of support page:

http://www.jvc-victor.co.jp/english/download/vc31_vp20/index.html

Typically use should only need a USB cable and a video capture program such as Pinnacle Studio to get it to work. Once Studio is installed you plug your camera into the USB port and turn it on. Studio will recognize it.

Contact Panasonic support for your camera. They will tell you what is needed. It is possible that the software may be a free download from their site.

For some models of cameras a video capture board and its software must be installed in to the computer. This is something you will have to enquire about for your camera.

Jerry G.

Which software package are you using? My brother was able to solve the HD capture problem by using Adobe After Effects.

My capture software defaults to capture specs of 720x480x32 at 29.97 frames per second. It previews video at 360x240x32 at 29.97 fps. What resolution is your capture operating at? How about the camera?