Question about Aiwa NSX-AJ200 Shelf System

1 Answer

Unable to set clock

How do I set the clock? I have no manual.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Unable to set clock

Hit shift and clock (9) on your remote.
use the left double arrow and right double arrow buttons on the bottom to change the time...note: once you hit the shift and clock buttons, you have only 4 seconds to press another button...
once you have the time set, you can hit the pause button on the lower section to finish.

Posted on Jan 03, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Setting clock

To set clock:
1. Press "Timer/clock button". The hour digit begins to flash.
2. Press (<< P.DOWN or >> P.UP) on the multicontrol to set Hours.
3. Press SET button. The minute digits begins to flash.
4. Press (<, P.DOWN or >> P.UP) on the multicontrol to set Minutes.
5. Press "Set" button."CLOCK OK" appears on the display. The clock stops flashing, and the clock timer starts from "0" seconds. If the clock is not set "AM 12:00" will flash instead of the clock indication. When the time has been set, TIMER/CLOCK can be used to operate the daily timer recording timer.
If you haven't the user manaul to your set with you now, send your email address to me by Fixya comment bos. I've the downloaded user manual to your set, and I'll send a copy of it to you by return mail. OK.

Jan 21, 2012 | JVC MX-D402T Shelf System

1 Answer

Hi :) i was wondering how i change the clock on my Lg dvd Micro HiFi system FB163. i hold clock then press Set and from there i dont know how to change the time.

The answer is on pg 12 of the manual, which can be viewed here:

Press clock for two seconds.
use the track forward and back to set the type (12 hr or 24 hr)..
press set.
use track forward and back to set hour.
press set
use track forward and back to set minute.
press set

Jul 01, 2011 | LG FB163 DVD/DivX USB Micro system Shelf...

1 Answer

Clock on system

Please download Aiwa NSX-AJ310 User Manual here.
Hope this manual will help you to adjust clock time.

Sep 30, 2008 | Aiwa NSX-AJ310 Shelf System

1 Answer

No manual

Follow the procedure to set time/ clock.

Setting the clock
1. Press and hold CLOCK until
the hour flashes on the display.
2. Press << / >> to set the hour
and then press CLOCK to shift
to minute digits.
3. Press << / >> to set the minute.
4. Press PROG•SET to save
settings or STOP to quit setting.

You can download user manual at RCA Support.


Sep 07, 2008 | RCA RS2663 Shelf System

1 Answer

Sony MHC-2800 setting the clock

Hi, it's simple. First press "Timer1" and Timer2" buttons together, clock on display will start blinking, by cursors "Up/Down" you can change the value of hours and minutes (switching between hours/minutes by "Left/Right" cursor). To save set time press "Memory". Enjoy your set clock :)

Jan 07, 2008 | Audio Shelf Systems

9 Answers


Turn the system on and press the "Clock/Timer" button (located above the eject button for Deck 1). The clock will appear. To change the time, simply hold down either the < or > buttons (the ones you use to change radio stations and begin CD/tape playback). Press "Clock/Timer" again to lock in the time.

Dec 28, 2007 | RCA RS2622 CD Shelf System

1 Answer

Setting the clock

Here is a link to the manual: The instructions for setting the clock are on page 10. You will need the remote in order to set the clock.

Mar 13, 2007 | Sony MHC-GX20 CD Shelf System

2 Answers

Alarm clock radio feature

Before you do anything else, Cancel the Timer setting, which is activating the machine to start Playing in the afternoon. You will need the machine's Remote for this. On the Remote, Press TIMER repeatedly, while pressing SHIFT, till the Clock Symbol disappears from the Front Display. Now if you have to reset the Timer to play the machine at a different time - early morning, as you desire, follow these steps. First You have to make sure that the clock is set to the correct Time.Is it? Fine. If it is not,read trhe Owner's Manual and set it to the correct Time. Take note that you mark the AM or PM funtion properly. After the time is set correctly, You gotta set the clock to Switch On the set at a designated time in the morning. Follow the "Setting the Timer" instructions in the Manual to do so. Please do make the effort. I am here to help you, but I also do not encourage spoon feeding. You havta to some work yourself too. If you are still unable to do so, mail me at, and I shall send you step - by - step instructions Good Luck!

Sep 19, 2006 | Aiwa NSX-AJ310 Shelf System

Not finding what you are looking for?
Aiwa NSX-AJ200 Shelf System Logo

Related Topics:

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aiwa Audio Shelf Systems Experts


Level 3 Expert

4502 Answers

The Knight
The Knight

Level 3 Expert

66352 Answers

Cindy Wells

Level 3 Expert

4718 Answers

Are you an Aiwa Audio Shelf System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides