Question about Microsoft Office Access 2003 (077-02871) for PC

1 Answer

Need help in dallas, TX

I have a server running programs with microsoft access and once inside the program an error 2603 you do not have permission comes up.

i can go to the server and open the program, go to the tool dropdown, security, user and group permission but this is greyed out how can i fix this

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 98 Answers
Re: need help in dallas, TX

I'm not sure how you are trying to open the program remotely - I assume it's in a shared folder. If so, then the security for the file has to be set appropriately. That's done in Windows Explorer - right click on the file in question and click on Security, then adjust the permissions as necessary.

Posted on Jan 06, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Repair MS Access database without having program installed

Use Recovery Toolbox for Access developed for recovering data from corrupted Microsoft Access databases. The MS Access recovery tool is capable of repairing MDB and ACCDB database files.

For more:

Oct 18, 2015 | Microsoft Office Business & Productivity...

2 Answers

How can i fix error 1404 on microsoft office 1010

  1. If you receive the "Error 1404" error message, remove the registry subkey that is referred to in the error message. To do this, follow these steps:

    Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
    1. Click Start, click Run, type regedt32 in the Open box, and then click OK.
    2. Locate the registry subkey that is referred to in the "Error 1404" error message. Make sure that you locate the exact registry subkey that is specified in the error message.
    3. Right-click the registry subkey that you located in the previous step, and then click Permissions.
    4. Under Group or user names, click Administrators, click to select the Full Control check box under Allow, and then click OK.
    5. Right-click the registry subkey, and then click Delete.

      When you are prompted to confirm the deletion, click Yes.
  2. Start Windows Explorer, and then locate the drive:\Winnt\Installer folder. In this folder location, drive is the hard disk where Windows is installed.

    Note This folder may be hidden. If the drive:\Winnt\Installer folder does not appear in Windows Explorer, follow these steps:
    1. On the Tools menu, click Folder Options, and then click the View tab.
    2. Under Advanced settings, click to select the Show hidden files and folderscheck box, and then click OK.
  3. Grant appropriate access permissions for the drive:\Winnt\Installer folder for the following groups: Administrators: Full Control
    SYSTEM: Full ControlTo do this, follow these steps:
    1. Right-click the drive:\Winnt\Installer folder, and then click Properties.
    2. Click the Security tab.
    3. In the Name list, click the appropriate user group or user name that you want to assign permissions for. For example, click Administrators.
    4. Under Allow, click to select the check box for the appropriate permission that you want to set, and then click OK. For example, click to select the Full Controlcheck box, and then click OK.
  4. Restart the computer.
  5. Insert the microsoft office CD into the CD or DVD drive, and then run the microsoft office Setup program.
  6. After the microsoft office Setup program has completed running, reinstall your antivirus software program.

Nov 10, 2010 | Microsoft Office 2003 Basic Edition...

8 Answers

How can i fix the problem by error message 262,level 14,state 1,line 1 CREATE DATABASE permission denied in database 'master' in sql server 2005

RecoveryFix for SQL server database recovery utility is a very powerful utilty to fastly short out your all problems to MS SQL database. By using this application, user can simply repair SQL database. Read more:
For more information read this post:

Jun 22, 2010 | Microsoft SQL Server 2005 Enterprise...

3 Answers

Having a problem with uninstalling MS office 2003 Error 1402

go to type regedit in box. hit enter.

find HKEY_LOCAL_MACHINES. SOFTWARE.scroll down to microsoft office.delete.

DO NOT CONFUSE with microsoft windows or any other microsoft program.regedit is a volitile area you can mess up your os by deleting the wrong thing.

after this go to computer. cdrive program files and find microsoft office folder and delete. reboot pc when done.

good luck

Jan 10, 2010 | Microsoft Office 2003 Pro (269-07387) for...

1 Answer

Error installing MS Office pro 2007 with BCM

Uninstall from control panel the following:
Microsoft SQL Server native client
Microsoft SQL Server Setup Support files
Microsoft SQL Server VSS writer

Move directory C:\Program Files\Microsoft SQL Server\MSSQL.1 to another location for possible use. Delete everything under Microsoft SQL Server in c:\Program Files


Jan 10, 2010 | Microsoft Office Professional 2007 Full...

1 Answer

What is run time error '-2147467259(80004005)' how i solved it rewati nadan

"The Microsoft Jet Database Engine cannot open the file '(unknown)'"There are several causes for this error message:
  • The account that Microsoft Internet Information Server (IIS) is using (which is usually IUSR) does not have the correct Windows NT permissions for a file-based database or for the folder that contains the file.
  • The file and the data source name are marked as Exclusive.
  • Another process or user has the Access database open.
  • The error may be caused by a delegation issue. Check the authentication method (Basic versus NTLM), if any. If the connection string uses the Universal Naming Convention (UNC), try to use Basic authentication or an absolute path such as C:\Mydata\Data.mdb. This problem can occur even if the UNC points to a resource that is local to the IIS computer.
  • This error may also occur when you access a local Microsoft Access database that is linked to a table where the table is in an Access database on a network server.
  • Check the permissions on the file and the folder. Make sure that you have the ability to create and/or destroy any temporary files. Temporary files are usually created in the same folder as the database, but the file may also be created in other folders such as the WINNT folder. For additional information about how to identify which folder does not have the correct permissions and how to configure temporary files, click the following article number to view the article in the Microsoft Knowledge Base: 253604 ( ) Microsoft Access 97 database connectivity fails in Active Server Pages If you use a network path to the database (UNC or mapped drive), check the permissions on the share, the file, and the folder.
  • Verify that the file and the data source name (DSN) are not marked as Exclusive.
  • The "other user" may be Microsoft Visual InterDev. Close any Visual InterDev projects that contain a data connection to the database.
  • Simplify. Use a System DSN that uses a local drive letter. If necessary, move the database to the local drive to test.
  • Follow the instructions in the following article to work around this problem: 189408 ( ) FIX: ASP fails to access network files under IIS 4.0 and IIS 5.0

Oct 16, 2009 | Microsoft Access 2003 for PC

2 Answers

I am unable to open any Microsoft Office 2007 applications

do you have other applications running in the background? Close them down, also the Internet explorer. Check in the taskmanager that you have no other application running and try to start the application again.
Check the available space on your drive c:
Is Microsoft Office installed on a server then the server maybe running out of space and you should report this to the server administrator.

Aug 27, 2009 | Microsoft Office Professional 2007 Full...

2 Answers

Can't activate microsoft office home & student 2007

Once Microsoft Office 2007 has been installed with no product key, proceed with the following steps:

1. In Windows Explorer, browse to the following folder:
C:\Program Files\Common Files\Microsoft Shared\OFFICE12\Office Setup Controller\Proof.en\
2. Right click on Proof.XML file, select “Open With…” in the right click menu.
3. In the “Open With” window, select Notepad to be used to open the XML file. In Vista, if you can’t see the Notepad option, simply double click the “Other Programs” to unhide it.
4. Scroll down to the bottom of the Proof.XML to locate the following lines:
</Feature> <Feature Id=”SetupXmlFiles” Cost=”1248′>
<OptionRef Id=”AlwaysInstalled”/>
5. Change the AlwaysInsalled to neverInstalled so that the line looks like following:
<OptionRef Id=”neverInstalled”/>
6. Save the Proof.xml file. In Windows Vista, you may need to take ownership and grant full access permission to yourself before able to modify the file.
7. You can now launch Microsoft Office 2007 application such as Word, Excel, Powerpoint, Outlook and etc without prompting for activation.

Aug 01, 2009 | Microsoft Office Professional 2007 Full...

1 Answer

Default Mail Client

Have you ever had Outlook configured correctly to access your email server and download messages?
It sounds like you have set outlook as the default email client but you have not yet configured the email account settings within outlook so that outlook knows how to connect to your mail server online.
Please refer to this link or this link for instructions on how to do this.
Check the programs tab of Internet Options in control panel and make sure Outlook appears as the default email client.

If you follow the instructions in this tutorial you should be able to enter your administrative account and ensure that the Office Diagnostics program runs with sufficient privileges...I believe that will correct this error message...
If not, If you have correctly configured your email accounts within outlook and outlook is set as the default, please see this posting and the recommended change to correct the situation.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Apr 18, 2009 | Microsoft Office Outlook 2007 for PC

2 Answers

I need help with microsoft office 2007

The resolution appears to be two fold,

First of all you might want to add the following registry key depending on the application for which the user gets a prompt:
Click on Start Run then type in the following command for respective applications.
reg add HKCU\Software\Microsoft\Office\12.0\<application>\Options /v NoReReg /t REG_DWORD /d 1 For Ex:
reg add HKCU\Software\Microsoft\Office\12.0\Word\Options /v NoReReg /t REG_DWORD /d 1
reg add HKCU\Software\Microsoft\Office\12.0\Excel\Options /v NoReReg /t REG_DWORD /d 1
reg add HKCU\Software\Microsoft\Office\12.0\Outlook\Options /v NoReReg /t REG_DWORD /d 1
reg add HKCU\Software\Microsoft\Office\12.0\PowerPoint\Options /v NoReReg /t REG_DWORD /d 1.
This should normally take care of the issue in applications like Outlook ,Word and Power point .

The user might also get a secondary error message when opening Excel application that states the following. stdole32.bmp

Note: Opening excel in the application safe mode would bypass the error. But this could be misleading coz the issue has more to do with permission than add-in within the application.

To resolve this problem you would need to perform the following steps:

1) Go to start > run > regedit

2) Navigate to the HKEY_CLASSES_ROOT > Excel.Chart.8

3) Right Click on key and select Permissions

4) In the Permission windows > Click on Add Tab and add everyone

5) Once this is done Click on the Advanced Tab > Owner > Highlight Everyone > Click on Apply and Ok

6) In the Permission > Select Everyone > enable the check box for Full Control and Read, then Click on Apply and Ok.

7) Click on F5 to refresh, this should create a new Sub key below Excel.Chart.8 called Protocol > Right Click on the key and repeat step 3 – 5.

8) Refresh again and follow the same sequence of steps to add permission to the following Sub keys StdFileEditing >Server.

9) Close the registry editor.

This should resolve the issue for good.

Dec 05, 2007 | Microsoft Office Professional 2007 Full...

Not finding what you are looking for?
Microsoft Office Access 2003 (077-02871) for PC Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Business & Productivity Software Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

18257 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you a Microsoft Business and Productivity Software Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides