Question about Jensen JER-422 Universal Remote Control
HAVE A ZENITH TV, WOULD LIKE TO PROGRAM MY REMOTE JER 422
Here are the instructions for the manual code search:
1.Manually turn on the component you want the remote to control.
2.Press and hold the component key (TV, VCR, Etc..) you wish to program. The illuminated ON-OFF key turns and remains on.
3.While holding the component key down, press and hold the ON-OFF key. The illuminated ON-OFF key turns off.
4.After holding down both keys for three seconds, the illuminated ON-OFF key turns back on.
5.Release both keys. The illuminated ON-OFF key remains on.
6.Press and release the ON-OFF key repeatedly until your component turns off. Wait four seconds between each keypress. Each time you press the ON-OFF key, the illuminated ON-OFF key blinks and the next code in the list is sent. This process continues until all of the codes in the Code lists have been searched. If your component turns off, you have found the correct code.
7.Once you have found the correct code, you must save the new code by pressing and releasing the STOP key. The illuminated ON-OFF key turns off. You must press the STOP key to save the code or the correct code will not be stored.
Digital Camera HQ
Posted on Dec 04, 2007
Tips for a great answer:
Dec 20, 2010 | Philips 313923812851 Remote Control
Sep 09, 2009 | Jensen JER-422 Universal Remote Control
Mar 21, 2009 | Philips Magnavox Learning Universal Remote
Sep 08, 2008 | Remote Controls
Jan 29, 2008 | Jensen JER-422 Universal Remote Control
Jan 12, 2008 | Jensen JER-422 Universal Remote Control
Jun 07, 2007 | Jensen JER-822 Remote Control
265 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: