Question about Sorelle Lana Baby 15935 Crib

1 Answer

Drop side of crib

The drop side of the crib can be pushed down without my having to push in. Soon my two year old will notice than he can do it too. Is there a way to fix this. i have tried tightening all of the screws but that didn't do anything.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 58 Answers

I think that there is supposed to be a pin with a spring that holds this up. You should contact Sorelle's parts department to get a replacement. We don't have one anymore or I would try to get you more info on how to replace it at your local hardware store.

Here is the contact information for Sorelle.

46 Whelan Road East Rutherford, NJ 07073
Phone: 201-531-1919 Fax: 201-531-1920

Posted on Jan 29, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gerry Wood Products Crib 9021 Not On Recall List???


Did you try (800) 582-9359 ? I dont see a full size cribs in the recall as you noted, just the porta-cribs. The metal slat the releases the drop side is called a Kick Rail and it was a common design a long time ago. Remember that dropside cribs are now considered dangerous and illegal to sell, via the CPSC website. If you have decided to continue use of the crib, simply create an "L" bracket under the bottom of the dropside that will prohibit the side from lowering. Also note that the CPSC says any crib over 10 years old is considered unsafe. I have personally spoken with Gerry/Huffy in the last 6 months so you should be able to reach them. Please respond if not and I will follow up. Good luck and be safe.

Aug 27, 2012 | Baby Gear

Tip

Recall, Baby cribs. U.S Consumer Product Safety Comm.


About 1 Million Simplicity Cribs Recalled Due To Failures Resulting in Infant Deaths NOTE: Repair Kits that immobilize the drop-side are now available
ALSO NOTE: Consumers who have participated or have yet to respond to Simplicity’s June 2007 recall of Nursery-in-a-Box cribs are strongly urged to also participate in this recall. AND ADDITIONALLY: A subsequent recall involving Simplicity drop side cribs has been issued. WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission (CPSC) is announcing today a voluntary recall with Simplicity Inc., of Reading, Pa., of about 1 million cribs. The drop-side can detach from the crib, which can create a dangerous gap and lead to the entrapment and suffocation of infants. CPSC is aware of two deaths in Simplicity manufactured cribs with older style hardware, including a 9-month-old child and a 6-month-old child, where the drop-side was installed upside down. CPSC is also aware of seven infant entrapments and 55 incidents in these cribs. CPSC is also investigating the death of a 1-year-old child in a Simplicity crib with newer style hardware, in which the drop-side was installed upside down. CPSC is warning parents and caregivers to check all Simplicity cribs to make sure the drop-side is installed right side up. The drop-side failures result from both the hardware and crib design, which allow consumers to unintentionally install the drop-side upside down. This, in turn, can weaken the hardware and cause the drop-side to detach from the crib. When the drop-side detaches, it creates a gap in which infants can become entrapped. CPSC is also aware of two incidents that occurred when the drop-side was correctly installed with older style hardware, though the upside down installation greatly increases the risk of failure. The recalled Simplicity crib models include: Aspen 3 in 1, Aspen 4 in 1, Nursery-in-a-Box, Crib N Changer Combo, Chelsea and Pooh 4 in 1. The recall also involves the following Simplicity cribs that used the Graco logo: Aspen 3 in 1, Ultra 3 in 1, Ultra 4 in1, Ultra 5 in 1, Whitney and the Trio. The recalled cribs have one of the following model numbers, which can be found on the envelope attached to the mattress support and on the label attached to the headboard: 4600, 4605, 4705, 5000, 8000, 8324, 8800, 8740, 8910, 8994, 8050, 8750, 8760, and 8996. The cribs, which were made in China, were sold in department stores, children’s stores and mass merchandisers nationwide from January 1998 through May 2007 for between $100 and $300. As an immediate precaution, consumers should check to see if the drop-side is installed right side up. To do this, check to see that the slightly rounded rail with the decorative groove is installed at the top and the plain rail is on the bottom. Next, consumers should make sure the drop-side is securely attached to the tracks in all four corners.

There is more info, including phone #'s ect on the
U.S. Consumer Product Safety Commission Webite about this recall.

Here's the website..

http://www.cpsc.gov/cpscpub/prerel/prhtml07/07307.html

on Feb 03, 2009 | Graco Apsen 3-in-1 8740 Crib

2 Answers

I bought my 6 month old baby boy a crib at little angels network consignment sale last year . later to find out on my own,that this bed is not safe,so i research to see if there was a recall on this...


My 2 1/2 year old was in a Delta Crib that turned out to be Recalled and it was only because of the Drop Down side - they said there were no issues with her Crib itself but with all of the Issues they had had last year they are being safer and not sorry - On the board under the mattress I found the model # and I called Delta (Got their # off of DeltaEnterprises.com) and they sent me two peices to install to keep the drop down side from going down - and that fixed any issue it had - and it is a safe crib still. Call them do not tell them you got it second hand - and give them the Model # and they should send you a "fix Kit" for the problem. Free of charge.

Jan 16, 2011 | Delta Luv Delta - Baby Products 5-in-1...

1 Answer

I need a part for a crib


Please read this, I'm not sure if yours is included because looks like you listed it as 'ultra deluxe' but better to be safe than sorry...

About 1 Million Simplicity Cribs Recalled Due To Failures Resulting in Infant Deaths NOTE: Repair Kits that immobilize the drop-side are now available
ALSO NOTE: Consumers who have participated or have yet to respond to Simplicity’s June 2007 recall of Nursery-in-a-Box cribs are strongly urged to also participate in this recall. AND ADDITIONALLY: A subsequent recall involving Simplicity drop side cribs has been issued. WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission (CPSC) is announcing today a voluntary recall with Simplicity Inc., of Reading, Pa., of about 1 million cribs. The drop-side can detach from the crib, which can create a dangerous gap and lead to the entrapment and suffocation of infants. CPSC is aware of two deaths in Simplicity manufactured cribs with older style hardware, including a 9-month-old child and a 6-month-old child, where the drop-side was installed upside down. CPSC is also aware of seven infant entrapments and 55 incidents in these cribs. CPSC is also investigating the death of a 1-year-old child in a Simplicity crib with newer style hardware, in which the drop-side was installed upside down. CPSC is warning parents and caregivers to check all Simplicity cribs to make sure the drop-side is installed right side up. The drop-side failures result from both the hardware and crib design, which allow consumers to unintentionally install the drop-side upside down. This, in turn, can weaken the hardware and cause the drop-side to detach from the crib. When the drop-side detaches, it creates a gap in which infants can become entrapped. CPSC is also aware of two incidents that occurred when the drop-side was correctly installed with older style hardware, though the upside down installation greatly increases the risk of failure. The recalled Simplicity crib models include: Aspen 3 in 1, Aspen 4 in 1, Nursery-in-a-Box, Crib N Changer Combo, Chelsea and Pooh 4 in 1. The recall also involves the following Simplicity cribs that used the Graco logo: Aspen 3 in 1, Ultra 3 in 1, Ultra 4 in1, Ultra 5 in 1, Whitney and the Trio. The recalled cribs have one of the following model numbers, which can be found on the envelope attached to the mattress support and on the label attached to the headboard: 4600, 4605, 4705, 5000, 8000, 8324, 8800, 8740, 8910, 8994, 8050, 8750, 8760, and 8996. The cribs, which were made in China, were sold in department stores, children’s stores and mass merchandisers nationwide from January 1998 through May 2007 for between $100 and $300. As an immediate precaution, consumers should check to see if the drop-side is installed right side up. To do this, check to see that the slightly rounded rail with the decorative groove is installed at the top and the plain rail is on the bottom. Next, consumers should make sure the drop-side is securely attached to the tracks in all four corners.

Here's the site...
http://www.cpsc.gov/cpscpub/prerel/prhtml07/07307.html

Please be safe.

Jan 28, 2009 | Graco Ultra Deluxe 5-in-1 4605 Crib

2 Answers

Where do I find replacement parts im missingone side brackits


Please read this, there was a recall...

About 1 Million Simplicity Cribs Recalled Due To Failures Resulting in Infant Deaths NOTE: Repair Kits that immobilize the drop-side are now available
ALSO NOTE: Consumers who have participated or have yet to respond to Simplicity’s June 2007 recall of Nursery-in-a-Box cribs are strongly urged to also participate in this recall. AND ADDITIONALLY: A subsequent recall involving Simplicity drop side cribs has been issued. WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission (CPSC) is announcing today a voluntary recall with Simplicity Inc., of Reading, Pa., of about 1 million cribs. The drop-side can detach from the crib, which can create a dangerous gap and lead to the entrapment and suffocation of infants. CPSC is aware of two deaths in Simplicity manufactured cribs with older style hardware, including a 9-month-old child and a 6-month-old child, where the drop-side was installed upside down. CPSC is also aware of seven infant entrapments and 55 incidents in these cribs. CPSC is also investigating the death of a 1-year-old child in a Simplicity crib with newer style hardware, in which the drop-side was installed upside down. CPSC is warning parents and caregivers to check all Simplicity cribs to make sure the drop-side is installed right side up. The drop-side failures result from both the hardware and crib design, which allow consumers to unintentionally install the drop-side upside down. This, in turn, can weaken the hardware and cause the drop-side to detach from the crib. When the drop-side detaches, it creates a gap in which infants can become entrapped. CPSC is also aware of two incidents that occurred when the drop-side was correctly installed with older style hardware, though the upside down installation greatly increases the risk of failure. The recalled Simplicity crib models include: Aspen 3 in 1, Aspen 4 in 1, Nursery-in-a-Box, Crib N Changer Combo, Chelsea and Pooh 4 in 1. The recall also involves the following Simplicity cribs that used the Graco logo: Aspen 3 in 1, Ultra 3 in 1, Ultra 4 in1, Ultra 5 in 1, Whitney and the Trio. The recalled cribs have one of the following model numbers, which can be found on the envelope attached to the mattress support and on the label attached to the headboard: 4600, 4605, 4705, 5000, 8000, 8324, 8800, 8740, 8910, 8994, 8050, 8750, 8760, and 8996. The cribs, which were made in China, were sold in department stores, children’s stores and mass merchandisers nationwide from January 1998 through May 2007 for between $100 and $300. As an immediate precaution, consumers should check to see if the drop-side is installed right side up. To do this, check to see that the slightly rounded rail with the decorative groove is installed at the top and the plain rail is on the bottom. Next, consumers should make sure the drop-side is securely attached to the tracks in all four corners.

Here's the site where I found this...

http://www.cpsc.gov/cpscpub/prerel/prhtml07/07307.html

Good luck, be safe.

Sep 30, 2008 | Graco Lauren Crib

1 Answer

Kinderkraft crib model 710


On the bottom of the front rail that drops (the drop rail), there are two plastic tension pieces (one at either end) that engage the two fixed, bottom rail slider hardware (the long, narrow pieces screwed top-and-bottom into the lower, inside portion of the tall, upright crib ends). These tension pieces are spring loaded, and the outer edge of each one rides along the outside (i.e., the parent's side) of the two bottom metal rail guides. Their purpose is to supply outward pressure against the lower part of the drop rail - that's what you push against when you press your lower leg upon the bottom of the drop side of the crib to lower it. They insure that when up, the drop side locks safely into place. I suspect these tension pieces are your problem. It sounds like they are improperly installed. Good luck.

Sep 10, 2008 | Kinderkraft Vermont Crib

1 Answer

Pottery Barn Sleigh Crib Assembly Instructions


We recently put together a PBKids sleigh crib bought on craigslist. the original owner gave us all the old bolts. We actually put the side that DOESN'T say "push" on first. When attaching the "push" side - the one thing we figured out is that you have to fit that side UNDER the rails that are visible on the sides and then pull UP (rather than going down, you have to pull up to fit it in.) that said, the original owner did not give us any bolts/stops to put in the sides that would keep the rail from falling completely to the floor when you push the drop side in. anyone else have suggestions?

Aug 10, 2008 | Baby Gear

2 Answers

Graco assembly instructions


It does not say on the instructions I have a phone number maybe you can call them and they can help you out better 1-800-858-8323. I hope that helps you out.
Irene

Jul 16, 2008 | Graco Apsen 3-in-1 8740 Crib

3 Answers

Need help with crib


PLEASE READ THIS,,

About 1 Million Simplicity Cribs Recalled Due To Failures Resulting in Infant Deaths NOTE: Repair Kits that immobilize the drop-side are now available
ALSO NOTE: Consumers who have participated or have yet to respond to Simplicity’s June 2007 recall of Nursery-in-a-Box cribs are strongly urged to also participate in this recall. AND ADDITIONALLY: A subsequent recall involving Simplicity drop side cribs has been issued. WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission (CPSC) is announcing today a voluntary recall with Simplicity Inc., of Reading, Pa., of about 1 million cribs. The drop-side can detach from the crib, which can create a dangerous gap and lead to the entrapment and suffocation of infants. CPSC is aware of two deaths in Simplicity manufactured cribs with older style hardware, including a 9-month-old child and a 6-month-old child, where the drop-side was installed upside down. CPSC is also aware of seven infant entrapments and 55 incidents in these cribs. CPSC is also investigating the death of a 1-year-old child in a Simplicity crib with newer style hardware, in which the drop-side was installed upside down. CPSC is warning parents and caregivers to check all Simplicity cribs to make sure the drop-side is installed right side up. The drop-side failures result from both the hardware and crib design, which allow consumers to unintentionally install the drop-side upside down. This, in turn, can weaken the hardware and cause the drop-side to detach from the crib. When the drop-side detaches, it creates a gap in which infants can become entrapped. CPSC is also aware of two incidents that occurred when the drop-side was correctly installed with older style hardware, though the upside down installation greatly increases the risk of failure. The recalled Simplicity crib models include: Aspen 3 in 1, Aspen 4 in 1, Nursery-in-a-Box, Crib N Changer Combo, Chelsea and Pooh 4 in 1. The recall also involves the following Simplicity cribs that used the Graco logo: Aspen 3 in 1, Ultra 3 in 1, Ultra 4 in1, Ultra 5 in 1, Whitney and the Trio. The recalled cribs have one of the following model numbers, which can be found on the envelope attached to the mattress support and on the label attached to the headboard: 4600, 4605, 4705, 5000, 8000, 8324, 8800, 8740, 8910, 8994, 8050, 8750, 8760, and 8996. The cribs, which were made in China, were sold in department stores, children’s stores and mass merchandisers nationwide from January 1998 through May 2007 for between $100 and $300. As an immediate precaution, consumers should check to see if the drop-side is installed right side up. To do this, check to see that the slightly rounded rail with the decorative groove is installed at the top and the plain rail is on the bottom. Next, consumers should make sure the drop-side is securely attached to the tracks in all four corners.

Your crib is listed here. The website where I found this is...

http://www.consultwebs.com/products-recall-lawyers.html

scroll down to Sept. 21, 2007.

Dec 08, 2007 | Graco Apsen 3-in-1 8740 Crib

Not finding what you are looking for?
Sorelle Lana Baby 15935 Crib Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sorelle Baby Gear Experts

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

ray gallant

Level 3 Expert

50354 Answers

Brett Duxbury
Brett Duxbury

Level 3 Expert

3982 Answers

Are you a Sorelle Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...