Question about Epson ACULASER CX11NF All-In-One Printer

1 Answer

Won't print Stuck in a foreign language and it won't print.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: Won't print

If your computer is in a foreign language - and you cannot understand the prompts. try the following.
1 press the setup button
2 press the right arrow key once
3 press the down arrow key twice
4 press the right arrow key twice

that should put you on the languages, scroll through the options until you find English (or your preferred language) and press the right arrow key twice once more - that should reset the language for you

Posted on Jan 30, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My Lexmark printer 2600 series won't print. It pulls the paper towards the right but won't feed it. How can I fix this?

Leading cause of paper jams is debris/foreign objects that accidentally fell into the paper feed area. Please follow steps below to fix the problem:

1. Remove the sheets of paper from the feeder.

2. Grab a flashlight and look inside the feeder for any debris or foreign objects.

3. If you're willing and physically able, you may also turn the printer over. Any debris should just freely roll out from the feeder.

4. If feeder is clear, place the printer back on the table, open the printer cover and remove the cartridges.

5. Check the cartridge area for any obstructions/debris in the cartridge carrier's path or the paper path.

6. If cartridge area is clear, close the cover.

7. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

8. When the printer turns on, reinsert the cartridges and load some paper. Try to print a document again to verify that the problem is fixed.

If problem continues, please contact Lexmark Technical Support Center for additional assistance.

Sep 03, 2011 | Lexmark X2600 InkJet Printer

1 Answer

We removed a stuck on label, now the printer won't print half the thermal label

I haven't seen one of these for years. However I really need more detail. In what direction is the print missing? across or down the label?

If across it most likely a dirty printhead

If down the label it could be a portion of label still stuck to the sensor.

Can you describe where the label stuck?

Aug 19, 2011 | Datamax Prodigy Plus Thermal Printer

1 Answer

A key bunch fall in the paper loding slot and stuck inside cannot take it out tell me how open the cover?

If you are willing and physically able, carefully turn your printer upside down. Any foreign objects should freely fall out of the feeder. You may have to slightly shake the printer if the key won't fall out.

Jun 21, 2011 | Lexmark X6650 4-In-One Wireless InkJet...

1 Answer

When trying to print the paper won't feed through. It will on the left side (looking at the front of the printer) but won't on the right preventing it to print. I just bought and replaced both...

There could be something blocking the paper path. Remove the sheets of paper from the feeder. Grab a flashlight and look into the feeder. Make sure there are foreign objects or debris that could cause this problem.

May 13, 2011 | Lexmark X4650 InkJet Printer

1 Answer

Printing problem

how can we print a booklet on this printer

Mar 15, 2009 | Lexmark X1240 All-In-One InkJet Printer

1 Answer

Would like to change Language settings for Epson Stylus Photo R290 Series Printer... Currently when printing a Test and when I go to the Print Preference, its showing as a foreign language... How can...

1. First of all, you must completely uninstall your current driver (with foreign language).
2. Download Epson R290 English Language Driver from here :
3. Unplug your printer USB Cable from your PC
4. Run : Setup.exe
5. Follow the instruction, and thats it. You've English Language now :)

I have tried this and it worked :)

Aug 28, 2008 | Printers & Copiers

1 Answer


The print properties are completely software based and have nothing to do with the printer itself. You've had to have installed the wrong version of the print driver or your operating system is set to the wrong default language. I'm assuming you would know if you were running a foreign copy of Windows so I would uninstall the printer and then download and reinstall the English version from the Ricoh website.

Jun 10, 2008 | Ricoh Aficio CL3500N Laser Printer

1 Answer

How to cancel a printing

Go to Start-> run . Type in services.msc. Find the print spooler service, right mouse click and choose stop. Open Explorer and go to c:\windows\systerm32\spool\printers and delete all files.
Go back to services.msc-- Print spooler. Right click and start service

Apr 06, 2008 | HP Deskjet 3845 InkJet Printer

Not finding what you are looking for?
Epson ACULASER CX11NF All-In-One Printer Logo

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

18258 Answers

Cindy Wells

Level 3 Expert

4720 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides