Question about Siemens Euroset 2005 Corded Phone

2 Answers

Call retrieve and call transfer

How can I transfer a call to another phone in a group??

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer
Re: Call retrieve and call transfer

Press recall key plus the extension number then you can transfer the call

Posted on Jan 30, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Call retrieve and call transfer

Transfer a Call in group
slight click hanger + ext.

Posted on Jan 17, 2012

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

When in night mode, how do I make the samsung idcs 18d ring on every extension

if you know your password for your phone system do this. enter programming mode by pressing transfer key, type 800 enter your password then volume up key then speaker key. go to program 601 station groups find unused station group ie 510. make this group unconditional and under members add all thr extensions you want to ring then press speaker key. then go to program 406. enter line number of line and under night mode tell it the station group number you programmed above

May 07, 2014 | Samsung Falcon iDCS 18D Display Phone with...

1 Answer

How do I turn the ringer on the phone. We have 5 phones in the office and only one rings. Is there a way to turn a ringer on all 5 phones so we can hear incoming calls from all offices?

Hi, you need your main telephone number to ring at a group ie 500, then you need to add the extensions to that group, I will try to explain;

With your handset down press TRANSFER - 200 - 1234 - 1 - SPEAKER KEY

Then dial 714, use the volume key to find the phone number required, the using the 3rd little soft key under the screen find the 1 or DAY destination type in the group number .

Then press speaker and go to 601 and add the members to the chosen group, I have uploaded a video explaining how to do this step. Go to for more training and programming tips.

May 17, 2011 | Samsung Prostar DCS Phone

1 Answer

Right now, when the phone rings - i have to press the line that is ringing. how can i just pick up the phone when it rings?

Hi, you need to put that extension into the ring group / groups. to do this, with the handset down dial;
Password 1234
1 to enable
press the volume key to get to the group(s) you want to be added to, this is the number in the brackets. once you have that press the 3rd soft key under the phone screen, use the volume key again to find 'members' then use your volume key when you get an empty slot - reads NONE, type in your extension number, press TRANSFER to store and exit programming. the video off will help explain,

Feb 14, 2011 | Samsung Prostar DCS-24B-LCD Corded Phone

1 Answer

Programming auto attendant on partner II

The extensions in the voicemail group are not programmed. You need to put the ports that the system sees the voicemail, into #505, group 7.

Apr 10, 2010 | Avaya Corded Phone avaparp18d

1 Answer

What to dial to access panasonic esa phone 616

Panasonic never issued a manual for R3. It was done with addendums that got you from R1 to R2 to R3. I think these are the right codes, but you may have to test them.

External page should be 33.
All Page (internal, I think) is 34. It's also the page transfer code.
Groups 1-4 are 35-38. (All phones are in group 1 by default)

43 is the "meet-me" code. It can retrieve any page or transfer to page.

Here's a link to a manual(s) if you need it.


May 11, 2009 | Panasonic KXT 61610 R3 Key Service Unit...

1 Answer

Ringing & voicemail transfer for DCS

I would need to know what group your lines are ringing in to.(Look at the phone display on any ringing phone and it will tell you the "ringing group" probably 500, 501 etc.) With that known we can add all three stations to that group and mark the "NEXT" option to go to station 202. Just have 202 forwarded to voice mail on a NO ANSWER condition and it will work for you

Nov 14, 2008 | Samsung DCS 12 Corded Phone

1 Answer

Transfering calls

It sounds like your dealer didn't properly set up incoming call distribution groups. They probably just gave you the "default" settings and left you a manual, took the check and said, "Good bye, and good luck!"

I think you mean transfer instead of forward. Your incoming calls should go through an Incoming Call Group - even if you're the only person in the group. Then you can handle the calls as they come in, transfer them out, and if you run out of buttons the system can even queue the calls up until you can get to them.

We have a support package that allows us to make all the changes you need over the Internet for a flat annual fee. If you want your whole system to work properly and all changes to be made for you at a flat budget, call us at 877-236-8376.

Jul 09, 2008 | Panasonic KX-T7633 Corded Phone

1 Answer

Transfer phone book from Motorola V3 to Samsung Instinct

Ok, I had the same situation come up on both my LG UX830 and another lesser LG phone that me and my wife had with US Cell.... The only way I was able to get my contacts over to my instict s30 and my wifes 1st gen instinct is via bluetooth.... I first started the blue tooth on both phones and then paired them together. Once done, send send the contacts over. I recommend doing this by groups if possible, cause I can't imagine doing this one contact at-a-time. By groups I mean, your general group, your family group and so on..

Jun 30, 2008 | Samsung Phones

1 Answer


You must go into programming to set this phone to ring.

The first thing that you have to know is , the group that all of your calls ring to. This is the 5xx # that shows on the display when the call is ringing in . (i.e. call for 500) 500 is the default ring group.

to enter programming, go to any display phone, without picking up the handset.

press transfer
dial 800
Passcode = 4321
press "1" (enable)
press speaker
dial 600
use the volume arrow key and arrow up until you get to
Members .
Press the right softkey under the display just to the left of the scroll btn.
the curser will move over under the member # (i.e. 01)
use the arrow up key to go to a member # that say NONE to the right of it.
press the right softkey again and the curser will move over and then dial the ext # that you want to ring and press the right softkey again.
press transfer to exit programming
the phone should ring , if you find that the ext is already in the ring group, then there must be a btn on the phone that you can press to put it in/out of the group.

Mar 19, 2008 | Samsung Prostar DCS-24B-LCD Corded Phone

2 Answers

Voice Mail

if you can not transfer a call to voicemail, there isnt a mailbox made. If you transfer a call and it doesnt go to voicemail, then there isnt a mailbox OR it isnt assigned to the voicemail group.

To assign a phone to go to voicemail (if there is a mailbox made)
at extension 10 or 11
press feature 00
LEFT intercom
Left intercom
#310 (auto VMS cover)
group 7
enter extension number.
If it says 2 not assigned, press "1" so it says assigned.
Press feature 00 when done.

If it still does not work, you need to build a mailbox. Will need to know EXACTLY which voicemail it is in that case.

Jan 15, 2008 | Lucent PARTNER18 Corded Phone

Not finding what you are looking for?
Siemens Euroset 2005 Corded Phone Logo

Related Topics:

1,900 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Phones Experts


Level 3 Expert

94198 Answers

Cindy Wells

Level 3 Expert

4722 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Siemens Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides