Question about Toshiba 62HMX84 62" Rear Projection HDTV

2 Answers

No Picture... but I have sound

I have sound but no picture. The red LED light stays on, but the green one blinks 15 times then the TV resets itself and does it again. I've heard I through people with similar complaints that I need a new light engine. If so... I know where I can buy one... Am I able to install it myself, and if so, how do I do it??

Any ideas would be greatly appreciated.
Thanks,
Justin

Posted by on

  • jwells4 Dec 04, 2007

    I already know where to get the part... what I'm trying to figure out is if I actually need a new light engine, or could it be something else. And... If I do need a new light engine, can I install it myself.

    Thanks,
    Justin

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 54 Answers

Yes you can change the light , however , fron the sound of it , there is no way you can tell if it is a light or not, it sound,s to me like the safty switch is comming on, which means its shorting out somewhere, i would not suggest you try fixing it your self, you will find it cheaper and less of a gamble taking it to a repair store where the correct diagnoses can be made ,

Posted on Dec 04, 2007

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Http://tacpservice.toshiba.com/ConsumerProductSupport/consumer_parts.htm

that the most i can help you with

Posted on Dec 04, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NO PICTURE OR SOUND ,GREEN LED STAYS ON FOR 10 SECONDS THEN A RED FLASH . PROCESS REPEATS ITSELF


Hi
You have to check how may time that led flashes. check the link for more details about led blinking in sony bravia tv.

www.electro-medical.blogspot.com

Mar 18, 2015 | Sony KDL-40XBR4 40 in. LCD HDTV

1 Answer

We have a 2007 Sony Bravia 46" KDL-46VL130. There is not sound or picture. When we power it on the green light comes on blinking once and then the red light blinking once and then the green light stays on....


Does the front light stays green ? Or goes back to red ? The back-light going on/off maybe the problem, but it shoul return with a red blinking led (4 times ?) and if so it can be a power inverter problem.

Oct 09, 2013 | Sony Bravia KDL-46VL130 TV

1 Answer

Sony Grand Vega green light blinks on and then blinks red


Please intimate exact model of your Sony TV and also mention how many times red light blinks as there would be pause of 3 seconds in blinks so count pause to pause and let me know to find out problem.
How old is this TV and did you replaced its lamp?
Thanks.

Sep 14, 2009 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

I have a Philips Plasma tv 42pf5321d/37 with sound but no picture


Thats the great sound of Exploding capacitors on either the power supply board. or another one in there. Now the set is in fault protection. It tried to warn you with the RED blinking LED that there was something amiss by shutting itself down. When you unplugged you reset the error and allowed it to do it again.

Best Regards and Smper Fi

Jun 23, 2009 | Philips 42PF9630A 42 in. Plasma Television

1 Answer

Changed bulb and still no picture or sound


hello i think when you put a new bulb in you have reset the bulb counter good luck

shaun

May 30, 2009 | Toshiba TheaterWide 52HM84 52" Rear...

1 Answer

No picture and no sound


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.

Mar 11, 2017 | Samsung Televison & Video

Not finding what you are looking for?
Toshiba 62HMX84 62" Rear Projection HDTV Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...