Question about Marantz DR-6000 CD Player

3 Answers

OPC ERROR AFTER INITIALIZING ,OPC ERROR SHOWS UP ON THE DISPLAY,THEN WHEN REC TYPE IS PRESSED DISC ERROR APPEARS.0%MEMORY ALSO IS INDICATED

Posted by on

  • Anonymous Feb 26, 2008

    Have tried both the Sony CD-R amd Mazell CD-R Music...9WHICH has WORKED IN THE PAST..NO i GET "WRONG cd"...OR IT IMMEDIATELY GOES TO updae.

    wHAT DO I DO?

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

How would I go about fixing the lazer problem with this issue of OPC Error when I push record. Sometimes when I use a lens cleaner, it will records some cds and then the error shows up again. Any help, Thanks

Posted on Feb 06, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 112 Answers

OPC error means the laser cannot calibrate the power to record the disc. If you confirm you are using an audio cdr / cdrw, the it would point to a laser issue.

Posted on Jan 22, 2008

  • Paul Richardson
    Paul Richardson Sep 04, 2014

    My Tascam CD-RW750 everytime I put a memorex CD-RW in the drive, it just comes up and says NOW OPC, but works fine when I put CD-R in it. I need the cd-rw so If I make mistakes I can erase it. Can't erase cd-r. Please help. I don't know what's wrong. Thanks for any help on this.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 13 Answers

El error opc se produce un 90% por la lente esta mal, esta grabadora usa una mecanica de pc de 4x de philips o acer , es la unica manera de reparar la grabacion, tambien los cd tdk de audio fallan los mejores maxell son perfectos.

Posted on Nov 25, 2014

  • matali Nov 25, 2014

    este comentari se reciere a philips 570.775.777

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Scan says all channels locked out


Please try this,

If the scanner's display locks up or does not work properly after you connect a power source, you might need to reset or initialize it. If you have problems with the scanner, first try to reset it to retain the memory. Warning: Initializing the scanner will clear all channel memories and reverts it the state it was in right out of the box.To Initialize the scanner, turn off the scanner then turn it back on. Press 0 when the welcome screen appears. 'Please select factory tests. Exit if no key is pressed' will briefly appear. Then quickly press 1. 'Initialization clear all memory Enter to confirm Clear to exit' will briefly appear. Quickly press ENT to initialize. 'Initializing, Please stand by' then appears. Do not turn off the scanner while it is initializing. The display should then show M000 on the top line and Bank 0 CH 00 when finished.

Hope that helps!!
Happy Scanning

Nov 22, 2012 | Radio Shack Pro-97 Handheld Scanner

1 Answer

Can,t get scanner off all channels locked mode


Please try this!!
You may need a soft or hard reset. Here's some reading and instructions.
Please use this first!
resetting your scanner
1. Turn off your scanner, and then turn it on again.

2. Insert a pointed object into the reset hole on the back
of the scanner. Then, gently press and release the reset
button. Pressing reset does not clear the scanner's
working memory or the V-Scanner folders.

If this doesn't work here's step two! CAUTION. THIS WILL ERASE EVERYTHING, but it MAY Fix the Problem!!

Initializing your scanner clears all information stored in your
scanner's working memory. Initialize your scanner only when
you are sure it is not working properly. V-Scanner memory is
not affected when you initialize the scanner.

1. Turn off the scanner, and turn it on again. First, the DSP
boot version, and then Welcome To Digital Trunking appears.

2. Press 0. The following messages appear on the display:

System Tests

Select Test
Exits if no
Key Press

3. Press 1. The following messages appear on the display:

Factory Init
Erase Memory
ENTER if Yes
CL to EXIT

4. Press ENT. The following messages appear on the display:

Initializing
Clr Main Mem
V-Scan is OK
Please Wait

5. Do not turn off your scanner until the initialization is
complete. When the initialization is complete, M000 and
Bank 0 Ch 00 appear on the display.

Hope this works.. Happy Scanning

Nov 20, 2012 | Radio Shack Pro-96 Scanner

1 Answer

Reset scanner


Please try this:
If the scanner's display locks up or does not work properly after you connect a power source, you might need to reset or initialize it. If you have problems with the scanner, first try to reset it to retain the memory. Warning: Initializing the scanner will clear all channel memories and reverts it the state it was in right out of the box.To Initialize the scanner, turn off the scanner then turn it back on. Press 0 when the welcome screen appears. 'Please select factory tests. Exit if no key is pressed' will briefly appear. Then quickly press 1. 'Initialization clear all memory Enter to confirm Clear to exit' will briefly appear. Quickly press ENT to initialize. 'Initializing, Please stand by' then appears. Do not turn off the scanner while it is initializing. The display should then show M000 on the top line and Bank 0 CH 00 when finished.

Hope that helps.
Happy Scanning!!

Oct 24, 2012 | Radio Shack Pro-97 Handheld Scanner

1 Answer

I have a radio shack pro96 i can not reboot it to restall the v scannfolder what can i do i have tryed everything to wipe it clean


Sounds like the motherboard is corrupted. Please try these steps again. Thanks!! Happy Scanning!!

I need to ask you this. Normally one bank can't be closed.
You may need a soft or hard reset. Here's some reading and instructions.
Please use this first!
resetting your scanner
1. Turn off your scanner, and then turn it on again.

2. Insert a pointed object into the reset hole on the back
of the scanner. Then, gently press and release the reset
button. Pressing reset does not clear the scanner's
working memory or the V-Scanner folders.

If this doesn't work here's step two! CAUTION. THIS WILL ERASE EVERYTHING, but it MAY Fix the Problem!!

Initializing your scanner clears all information stored in your
scanner's working memory. Initialize your scanner only when
you are sure it is not working properly. V-Scanner memory is
not affected when you initialize the scanner.

1. Turn off the scanner, and turn it on again. First, the DSP
boot version, and then Welcome To Digital Trunking appears.

2. Press 0. The following messages appear on the display:

System Tests

Select Test
Exits if no
Key Press

3. Press 1. The following messages appear on the display:

Factory Init
Erase Memory
ENTER if Yes
CL to EXIT

4. Press ENT. The following messages appear on the display:

Initializing
Clr Main Mem
V-Scan is OK
Please Wait

5. Do not turn off your scanner until the initialization is
complete. When the initialization is complete, M000 and
Bank 0 Ch 00 appear on the display.

Apr 11, 2011 | Radio Shack Pro-2096 Base Scanner

1 Answer

I have A radio shack PRO-2096 and have not been able to use it in over A year. it reads all channels locked out. I can't unlock it.can someone please help me?


Please try this!!
You may need a soft or hard reset. Here's some reading and instructions.
Please use this first!
resetting your scanner
1. Turn off your scanner, and then turn it on again.

2. Insert a pointed object into the reset hole on the back
of the scanner. Then, gently press and release the reset
button. Pressing reset does not clear the scanner's
working memory or the V-Scanner folders.

If this doesn't work here's step two! CAUTION. THIS WILL ERASE EVERYTHING, but it MAY Fix the Problem!!

Initializing your scanner clears all information stored in your
scanner's working memory. Initialize your scanner only when
you are sure it is not working properly. V-Scanner memory is
not affected when you initialize the scanner.

1. Turn off the scanner, and turn it on again. First, the DSP
boot version, and then Welcome To Digital Trunking appears.

2. Press 0. The following messages appear on the display:

System Tests

Select Test
Exits if no
Key Press

3. Press 1. The following messages appear on the display:

Factory Init
Erase Memory
ENTER if Yes
CL to EXIT

4. Press ENT. The following messages appear on the display:

Initializing
Clr Main Mem
V-Scan is OK
Please Wait

5. Do not turn off your scanner until the initialization is
complete. When the initialization is complete, M000 and
Bank 0 Ch 00 appear on the display.

Hope this works.. Happy Scanning

Jun 23, 2010 | Radio Shack Pro-2096 Base Scanner

3 Answers

PHILIPS CDR 870 FLASHING "OPCFAIL" AND WON'T RECORD


I HAVE A PHILIPS CDR 870 "OPC FAIL" PROBLEM. I HAVE RECORDED ONTO CD-RW, AND NOT YET FINALISED THE DISK AFTER RECORDING, IN ORDER THAT I CAN GO BACK LATER TO ADD FURTHER RECORDINGS. AFTER SWITCHING THE MACHINE BACK ON OPC THEN OPC FAIL FOLLOWS, EVEN WITH NEW DISKS CD-R AND CD-RW. MGHT THE MACHINE ITSELF REQUIE CLEANING OR IS THIS A FAULT? I AM USING MAXCELL DISKS, BOTH TYPES. THANKS. JEREMY. GATESHEAD.

Mar 19, 2010 | Philips CDR870 CD Recorder

1 Answer

IT WON'T BUDGE. IT READS ALL CHANNELS LOCKED OUT. PLEASE HELP


You may need a soft or hard reset. Here's some reading and instructions.
Please use this first!
resetting your scanner
1. Turn off your scanner, and then turn it on again.

2. Insert a pointed object into the reset hole on the back
of the scanner. Then, gently press and release the reset
button. Pressing reset does not clear the scanner's
working memory or the V-Scanner folders.

If this doesn't work here's step two! CAUTION. THIS WILL ERASE EVERYTHING, but it MAY Fix the Problem!!

Initializing your scanner clears all information stored in your
scanner's working memory. Initialize your scanner only when
you are sure it is not working properly. V-Scanner memory is
not affected when you initialize the scanner.

1. Turn off the scanner, and turn it on again. First, the DSP
boot version, and then Welcome To Digital Trunking appears.

2. Press 0. The following messages appear on the display:

System Tests

Select Test
Exits if no
Key Press

3. Press 1. The following messages appear on the display:

Factory Init
Erase Memory
ENTER if Yes
CL to EXIT

4. Press ENT. The following messages appear on the display:

Initializing
Clr Main Mem
V-Scan is OK
Please Wait

5. Do not turn off your scanner until the initialization is
complete. When the initialization is complete, M000 and
Bank 0 Ch 00 appear on the display.

Hope this works happy scanning!!

Jan 12, 2010 | Radio Shack Pro-2096 Base Scanner

2 Answers

"ALL CHANNELS LOCKED OUT' RADIO SHACK COULDN'T HELP.


If the scanner's display locks up or does not work properly after you connect a power source, you might need to reset or initialize it. If you have problems with the scanner, first try to reset it to retain the memory. Warning: Initializing the scanner will clear all channel memories and reverts it the state it was in right out of the box. To Initialize the scanner, turn off the scanner then turn it back on. Press 0 when the welcome screen appears. 'Please select factory tests. Exit if no key is pressed' will briefly appear. Then quickly press 1. 'Initialization clear all memory Enter to confirm Clear to exit' will briefly appear. Quickly press ENT to initialize. 'Initializing, Please stand by' then appears. Do not turn off the scanner while it is initializing. The display should then show M000 on the top line and Bank 0 CH 00 when finished.

Feb 28, 2008 | Radio Shack Pro-97 Handheld Scanner

2 Answers

Error Message ('replace belt CG')


To reset page counter after replacing the OPC belt or FC Roller please follow the steps below:
  1. Power the printer on while holding down MENU/ENTER key
  2. Release the key when the display shows "Utility Menu Clear FC Roll"
  3. If you have replaced the FC Roller then select this option by pressing MENU/ENTER key. If you have replaced the OPC belt then change this option by pressing MEDIA key so the display changes to "Utility Menu Clear Belt CG".
  4. When one of these options is selected Press the MENU/ENTER key and the display will change to "Utility Menu Clear FC. Roll/ Clear Belt CG Not Execute". Press the MEDIA key and the display will change to "Execute"
  5. Press the MENU/ENTER key and after about 10 seconds the display will change to "Completed Clear FC. Roll / Belt CG"
  6. Now power the printer off and after waiting few seconds power it on again, after it's initial self-diagnosis the printer should now work normally without the error message.

Jul 12, 2007 | Tally T8006 Laser Printer

1 Answer

How to unlocked region code


XD-DV480 Multi-Region: Converting the player to an alternative region:
  • Supply power to the unit and power on from standby mode via the remote
  • Wait until No Disc is indicated on the fascia
  • Now press Pause followed by 3, 4, 2, 2, 9 and then 2
  • The display should now read CODE
  • Now press 0, 0 for region free or 0 then 1 for region one, 2 for region two, and so on (Note: RCE discs will require specific region set)
If the above modification fails to work then the alternative method below may work:-
  • Connect the DVD player
  • Use the Remote Control to turn power on
  • Wait until No Disc appears
  • Press Pause and type the following code, 8, 9, 2, 6, the display will show "CODE__"
  • Within 5 seconds press 00 for all regions
  • Press Pause and Power
This should work for you.

May 07, 2007 | Aiwa XD-DV480 DVD Player

Not finding what you are looking for?
Marantz DR-6000 CD Player Logo

2,070 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marantz Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

 Grubhead
Grubhead

Level 3 Expert

5547 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Marantz Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...