Question about Washing Machines

2 Answers

Tricity Bendix AW440 W/M - Door won't open

How to replace/repair door latch on AW440 washing machine please?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 249 Answers

Sounds right to me

Posted on Dec 05, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

The door is in two parts outer and inner, i think there are a couple of screws on the inside, if not it just prises apart, then undo the two screws on the latch, please take note how it is fitted because they can be confusing, best buy the new one first.

Posted on Dec 05, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace door seal on tricity bendix 1000rpm it just come off


bit of a fiddly one it has 2 clips around the door seal one on inside one on out side

Jan 21, 2015 | Tricity Bendix Washing Machines

1 Answer

Tricity Bendix AW1260W - drum won't turn - 5 beep error repeats


Washer motor control board failure is the likely problem, also check all connectors for signs of burning. Also test the washer motor.

Apr 24, 2017 | Tricity Bendix AW1260W Front Load Washer

1 Answer

My bendix washing machine door does not open after wash cycle ha finished


  1. Is there still water in the machine when the wash cycle has finished? If so, the door doesn't open because there is still water in the machine. Try clearing the filter at the bottom of the machine, in the front. If this doesn't work, check that the drain hoses are cleared. If it still doesn't work, try replacing the drain pump.
  2. Is the "door" light still on? You may have a faulty door lock assembly, or your control board may be faulty.


I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Feb 27, 2011 | Tricity Bendix AW1400W Front Load Washer

1 Answer

Is there an emergency door release on my bendix washing machine?If so where is it?


No there isn't. The door will now open until until the wash cycle is finished

Jan 14, 2011 | Tricity Bendix AW1000W Front Load Washer

1 Answer

I want a complete door for aw850 tricity bendix washing machine


Hi
Can you please give me a product number for this model as there are two or three versions of door.
The product number will start ENr No: 9.................. Possibly found on the inside of the door, a label on the front of the machine next to the door seal or inside the filter flap.

Regards
Aardvark Repairs
aardvark.repairs@btinternet.com

Nov 18, 2009 | Tricity Bendix AW850W Front Load Washer

1 Answer

How to replace belt on tricity bendix aw440 washer


1. remove top plastic panel (retaining screws are at back)
2. locate metal brace (12 incles long and 1/2 inch wide) on top of the cabinet (in mine it is on right edge)
3. unscrew retaining small bolts (there is one a few inches below on the inside of the cabinet too).
4. Repeat for left side.
5. push the back and front halves of the cabinet away from each other
6. slide the new belt around the front of the drum
7. reassemble
8. if you need to tension the belt wrap 10-20 turns of insulation tape around the idler pulley

Oct 12, 2009 | Tricity Bendix Washing Machines

1 Answer

How do you replace a door latch on a Tricity Bendex CAW 1000 washing machine


remove door complete.remove screws holding 2 halves of door together and prise door into 2 halves and all is revealed

Nov 10, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Tricity Bendix AW1001w


is the door locking if not replace it.

Nov 23, 2007 | Tricity Bendix AW1000W Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

82313 Answers

Brad Brown

Level 3 Expert

17473 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...