Question about AEG Lavamat W1050 Front Load Washer

2 Answers

AEL Lavamat 509N

Hi there. purchased secondhand machine as moving in with some mates. the machine doesn't want to relinquish washing when finished...door stays locked. need urgent assistance. thank you

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers
Re: AEL Lavamat 509N


Posted on Oct 30, 2008

Re: AEL Lavamat 509N

These machines do not release the door immediately after wash cycle is complete. After final spin cycle wait until you hear a click sound.The door will then be able to be opened. This takes uproximately three minutes.

Posted on Oct 30, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My aeg lavamat 41070 washing machine doesn`t work at high temperature ( more then 50 degrees) . At low temps it is working OK/

In the case of insufficient heating appears error code E60 what means replace the NTC sensor. Exclude heater, PCB or relay malfunction because you indicate that the machine is heated to 50 degrees Celsius.


Feb 28, 2015 | AEG Washing Machines

1 Answer

On spin cycle drum going round but not spinning so clothes stay wet

Hi, if it doesn't spin, check to see if the motor is running, then proceed as follows:

If the motor is running, your washer probably has a frozen pump pulley or a broken pump belt. To check the pulley, remove the pump from the washer and try to rotate the pulley manually. If it doesn't turn freely--if it's frozen or stiff--replace it. If the pump belt is broken or looks quite worn, replace it--but be sure to check the pump pulley before you change the belt.

If the motor isn't running, the lid switch may be defective. If so, the washing machine can't spin and may not function at all. The switch is inside the washing machine main housing near the door frame. Often you have to raise or open the top or front of the washing machine to get to the switch. If it's defective, you need to replace it.

Jun 20, 2011 | AEG Lavamat 74640 Front Load Washer

1 Answer

Where can i purchase new hinges and closing magnets to suit a integrated AEG Lavamat washing machine?

If you are resident in UK, phone a very good supplier who has never let me down, and very cheap. Tell him Archie told you about him as normally he only sells to trade but often I recomend him. His name is Steve, and he will normall post items out.02476279856 good luck

Feb 12, 2010 | AEG Lavamat 72640 Front Load Washer

1 Answer

I want circuit daigrame for aeg washing machine

I have an AEG öko Lavamat 64600 washing maschine and I need a circuit diagram. Can you help me?

Dec 30, 2008 | AEG Lavamat 88840 Front Load Washer

1 Answer

AEG Lavamat 1000


dont know if this is the one you need AEG 1000 Washing Machine
you may need to scrool down to download the manual .


Mar 03, 2008 | AEG Lavamat 88840 Front Load Washer

1 Answer

AEG Lavamat W1450 2 years old,

possibly wire come loose or try disconnecting heater element and repeat spin cycle.if runs well then, replace heater.

Oct 24, 2007 | AEG Lavamat W1450 Front Load Washer

Not finding what you are looking for?
AEG Lavamat W1050 Front Load Washer Logo

Related Topics:

374 people viewed this question

Ask a Question

Usually answered in minutes!

Top AEG Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you an AEG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides