hi,
My Micro SD card works perfectly fine when its in my phone, but when i stick it in my adaptor and then my computer nothing appears. It used to work very well and i could put things on it and everything, but now NOTHING.
please help
Lots of things can go wrong here.. most likely, it is a problem with drivers, which can be resolved using the Device Manager.. but the first thing I would check would be the Disk Manager to see if it is not being assigned a letter that has already been taken..
Start > Run > diskmgmt.msc (ok)
See if it is in the list at the top.. if it is being assigned a letter that has been used already, then right click on the micro and "Change Drive Letter"
need to open safe do not know number, looking for insurance papers and cannot open brinks home...
(More)
need to open safe do not know number, looking for insurance papers and cannot open brinks home security safe, model number is 5074
i need a set up or where can i get the set up for wli2-pci-g54s by buffalo inc but its the air...
(More)
i need a set up or where can i get the set up for wli2-pci-g54s by buffalo inc but its the air station wireless-g
I have this device 2 wire network adapter, I want to activate on my Gateway PC with Windows 7. When...
(More)
I have this device 2 wire network adapter, I want to activate on my Gateway PC with Windows 7. When I load my HomePortal CD it loads the software but when it gets to the step to activate I get a configuration error and I have to use Task Manger to get out of error... Can you help?