Question about Linksys VOIP VONAGE PHONE ADPTR 2-PORT PAP2 Router

1 Answer

Not able to connect my voip adapter to internet

I have a broadband modem of ustarcom ut300r2u model i have a broadband connection . i am not able to connect my adapter to broadband to use the voip . plz help me.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 193 Answers
Re: not able to connect my voip adapter to internet

Hello sir iam working for voip and iam a tech?
and u r using linksys pap2 which is not a router its just a phone adapter so it will work through a router so try this first
is ur modem is a modem router and u have 4 ether net port on it and u can able to access inter net through hard wired and connect this pap 2 adapter through one of the ether net jack on the modem router (ut starcom)>an dit has a fire wall which block ur voice signals so u need to open some ports on it try this link to open all ports and u need to try this with a pc which connected through hard wired on the modem router go to through this link

and also disable the fire wall on the router screen and reboot the linksys pap2 and ur ut star com modem router also and connect ur phone directly to phone jack 1 on the pap 2 device if u have any issues let me know
and rate me solved if its helps thx

Posted on Dec 04, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

At the bottom of my router are two icons, the modem and the internet, which are flashing orange. all other icons are blue. i am unable to get a connection. I also have VOIP connected to my router, if that...

Some routers will not get online if voip is connected while repairing connection. I would unplug your voip and try to connect then. Unplug your modem for about 30-45 seconds and then make sure all wiring is correct. Once you are able to connect the plug your voip back in. Internet light is not supposed to be orange but green or on some routers blue. If your modem aslo has orange light it is possible it is your provider issue. I would also check with them if steps i described above dont work. Good luck.

Apr 28, 2010 | Routers

1 Answer

Moved router to connect directly to the Comcast modem that also provides VOIP. Comcast activated modem and internet works when computer is connected directly to Comcast modem. Router does not connect to...

Your ISP should have given you the following information...
Static IP, Internet IP Address, Subnet Mask, Gateway, Static DNS 1-3.
With that information at hand, follow tis link to the router user manual and go to Page 11 of the manual to go through the step by step process of setting the router up for an internet connection.,1.pdf

Nov 26, 2009 | Linksys WRT54GX2 Wireless-G Broadband...

1 Answer

Sir, I have broadband connection from bsnl ,modem is ut300r2u driver CD has been damaged/brocken in two parts please give solution to this problem



check this out.

Jun 08, 2009 | Routers

2 Answers

I have a WCG200 linksys but can not go onto internet.

from what i have read, your router is broadcasting a signal, and your modem has an open and active internet gateway.

pls make sure that the connection from the modem to the router are correct. the modem should be connected in the port with the label internet. you may have to reset your modem AFTER you have connected the wireless router to allow the router to be assigned an ip. now with the wireless router and broadband modem connected, you can connect to the network and access the internet. pls repost if you hit any snags
GOOD LUCK and PLS rate this post.

Mar 18, 2009 | Linksys WCG200 Router

1 Answer

Wireless router says its working laptop says no its not

Your sister was accessing the wireless access point at school which is connected to the Internet/WEB access via a router and the school's broadband service provider.
For you to access the Internet using your wireless adapter on your laptop, you need your own wireless access point and connect it to a broadband ADSL or cable modem and then connect it to an Internet Service Provider. Some Internet Service Providers (cable and ADSL) can supply a combined modem/router/wireless Access point.
If you already have a broadband modem all you need is a wireless access point/router. You only need to configure the wireless access point and your wireless adapter so they will communicate with each other. Folow the instructions in the manuals.

Dec 07, 2008 | NetGear WGR614 Wireless Router

1 Answer

Need to add Linksys WRT54G-TM wireless router with Linksys SPA 2102 phone adapter

your SPA2102-R seems to have one ethernet connection and one internet connection.
your WRT54G-TM seems to have one internet connection and 4 ethernet connections.

What you are trying to achive is; plug a ethernet cable into the ethernet connection on your SPA2102-R then plug the other end into the internet port of the WRT54G-TM

hope this helps, I have assumed that you intend to use a DSL broadband supplier not ADSL.

if you are changing service from DSL to ADSL then your WRT54G-TM needs to be first in line configured and working. then plug the internet port from the SPA2102-R into any of the WRT54G-TM ethernet ports.

Nov 06, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Use of router in network

Try reset the router & cable modem. There ia a reset (very small) button on the back of the wireless router & the modem. Disconnect the power cords to both. Use a pen & hold in for 10 seconds (router & modem). Re-connect power (router & modem) & restart PC. If your service still has not returned. Chances are it's your internet provider & not you. Double check by connecting your modem directly to your PC.


Apr 04, 2008 | Linksys Wireless-G Broadband Router

2 Answers

Wireless router installation

Please see my response to this question. Your university's connection is most probably a LAN connection, so you'd need to follow the instructions as if you had a cable internet connection (unlike DSL, a LAN connection and cable internet connection don't require authentication with the ISP).

Jan 07, 2008 | Linksys Wireless-G Broadband Router

Not finding what you are looking for?

649 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts


Level 3 Expert

18258 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers


Level 3 Expert

4327 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides