Question about Insignia NS-DA1G MP3 Player

2 Answers

Mp3 player keeps getting SYNC notice

Everytime I turn on my mp3 player I get a Sync notice. When I plug player into computer it won't let me Sync player. How can I delete songs on player and reload new songs back on player so I can Sync player

Posted by on

  • 10 more comments 
  • Abstract Dec 13, 2007

    Everytime I try to sync my insignia mp3 player it won't sync. When I plug it into the usb it makes a triple tone sound and then something pops on my screen that tells me this device can go faster. When I open up my computer my mp3 player is not recognized.

  • odazy Dec 22, 2007

    When I hook my mp3 player up the computer does not recognize it


  • chas1977 Mar 01, 2008

    when i get all my music ready to download i press start or sync at the bottom of the list and this notice pops up to reset my play or look through manual to this and here is the problem i DONT HAVE IT HELP!!!!!!!

  • Anonymous Mar 05, 2008

    i turn on my mp3 and a sync notice comes up and i cant listen to my songs

  • Anonymous Mar 08, 2008

    sync notice

  • Juicy J Mar 26, 2008

    mp3 player keeps getting SYNC , not license to play notice. I have a Zen V. What to do?

  • Anonymous Mar 31, 2008

    i dont know how to delete and put songs on mp3 player

  • Anonymous Aug 21, 2008

    Player will not accept the sync under Vista widows media player

  • Anonymous Sep 07, 2008

    hgdh

  • Anonymous Sep 24, 2008

    when i turn it on and try to play a new song it does the sync notice

  • Anonymous Sep 28, 2008

    well every time i try to sync it wont let me it said i need the handbook but i lost it

  • WizardboyXII Jan 10, 2009

    yea everytime i click on a song it says to delete and sync my mp3

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

For some reason all the data on my insignia disappeared. Now it won't sync with any computers and I thus can't reload any music. How do I remedy this please?

Posted on Nov 04, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 170 Answers

For NS-DA1G and NS-DA2G: If you are receiving a SYNC notice, your DRM media license has expired. If you are using a media manager like Best Buy Digital Media Store or Windows Media Player. you will first need to authorize the player as an MTP device (device authorized to play Digital Rights Management song files) and then re-acquire the licenses for the tracks. There should be a button that allows this function in your media software.

If you want to remove your DRM tracks, got to:
MENU - Settings - USB - File & Folder

This puts your player into Mass Storage Mode. Once in this mode the player will act like a USB drive and you can navigate to and delete your unwanted files.

Posted on Apr 17, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sync Notice


hook it up to your computer and allow windows media player to sync your mp3 player to the computer.

Apr 16, 2009 | SanDisk Sansa m230 MP3 Player

1 Answer

Everytime i try to put music on mp3 it won't let me


i think you need to add it to ya computer

Mar 28, 2009 | Jwin MP3 Player

1 Answer

My mp3 turns on but nothing comes up...


Could be a hardware issue, but:

These are the most common methods for recovering Sandisk's Sansa Mp3 Players. I have been almost universally successful in recovering Sansa players using one or a combination of these methods. These methods do not work if you are having synchronization or music format issues - they are for recovering a player that will not power up, freezes, flashes, is not recognized by the computer, and a host of other issues.

Reset the Sansa Player first. On most models, restart is done by holding the power button in for 15 seconds or longer. Check your specific manual to be sure. The manuals are available from the Sansa website if they have been misplaced.
Download the Sansa Recovery Tool from the Sansa website.
Format - Erases Everything: Connect your Sansa player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "Sansa 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
Firmware Upgrade- Erases Everything: Get the latest firmware upgrade from Sansa - it updates the firmware and erases every song in the player all at once. Note: this method doesn't work if already have the latest firmware. Go to this website and click "Firmware Updater" to find out: http://www.sandisk.com/DriverDownload/driverList.asp
If these fail, then:
Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.
If you get the problem where MTP Device keeps popping up continuously, uninstall the “MTP Device” by going to Start à Control Panel àSystem à Hardware à Device Manager (you computer may vary slightly, depending on Windows Version).
You may have to restart your computer after each of these methods to get them to work properly. Disconnect your Sansa player BEFORE shutting down your computer.
-Tha Mp3 Doctor

Dec 13, 2008 | SanDisk Sansa e250 MP3 Player

2 Answers

Can install mass storage device


These are the most common methods for recovering Sandisk's Sansa Mp3 Players. I have been almost universally successful in recovering Sansa players using one or a combination of these methods. These methods do not work if you are having synchronization or music format issues - they are for recovering a player that will not power up, freezes, flashes, is not recognized by the computer, and a host of other issues.

Reset the Sansa Player first. On most models, restart is done by holding the power button in for 15 seconds or longer. Check your specific manual to be sure. The manuals are available from the Sansa website if they have been misplaced.
Download the Sansa Recovery Tool from the Sansa website.
Format - Erases Everything: Connect your Sansa player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "Sansa 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
Firmware Upgrade- Erases Everything: Get the latest firmware upgrade from Sansa - it updates the firmware and erases every song in the player all at once. Note: this method doesn't work if already have the latest firmware. Go to this website and click "Firmware Updater" to find out: http://www.sandisk.com/DriverDownload/driverList.asp
If these fail, then:
Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.
If you get the problem where MTP Device keeps popping up continuously, uninstall the “MTP Device” by going to Start à Control Panel àSystem à Hardware à Device Manager (you computer may vary slightly, depending on Windows Version).
You may have to restart your computer after each of these methods to get them to work properly. Disconnect your Sansa player BEFORE shutting down your computer.
-Tha Mp3 Doctor

May 22, 2008 | SanDisk Sansa m250 MP3 Player

1 Answer

Ilo mp3 i gb


There are two ways to format an Mp3 player - one on the computer itself, and one in Windows Media Player. Both methods will end up erasing all the songs on the player, but the player will be "good as new" after that. Sometimes reformatting in this manner will override the player's native formatting and cause problems - this can be reversed in most cases by updating the player's firmware. Firmware upgrades are available from most manufacturers' websites.

WARNING: The following procedures will erase all songs on the player.

Check if the file system is NTFS. If yes, format it to FAT or FAT32. - Connect player to computer, double-click my computer, right click on icon of mp3 player and select format. This only applies to Windows-based computers.
You can also format the player in Windows Media Player itself:
Connect your Mp3 player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "name of Mp3 player here 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
-Tha Mp3 Doctor

Apr 24, 2008 | iLO (2 GB) MP3 Player

1 Answer

Won start


Try this: disconnect the player from the computer, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.
-----
Download the Sansa Recovery Tool from the Sansa website.
Format - Erases Everything: Connect your Sansa player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "Sansa 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
Firmware Upgrade- Erases Everything: Get the latest firmware upgrade from Sansa - it updates the firmware and erases every song in the player all at once. Note: this method doesn't work if already have the latest firmware. Go to this website and click "Firmware Updater" to find out: http://www.sandisk.com/Retail/DriverDownloads.aspx
or
http://www.sandisk.com/DriverDownload/driverList.asp

-Tha Mp3 Doctor

Apr 14, 2008 | SanDisk Sansa E280 MP3 Player

1 Answer

Boot error /format unit comes up on the screen when I turn the mp3 player on. When I plug in to the coputer the screen on the mp3 just blinks like its trying to read but don't . Can you help me? Everytime...


There are two ways to format an Mp3 player - one on the computer itself, and one in Windows Media Player. Both methods will end up erasing all the songs on the player, but the player will be "good as new" after that. Sometimes reformatting in this manner will override the player's native formatting and cause problems - this can be reversed in most cases by updating the player's firmware. Firmware upgrades are available from most manufacturers' websites.

WARNING: The following procedures will erase all songs on the player.

Check if the file system is NTFS. If yes, format it to FAT or FAT32. - Connect player to computer, double-click my computer, right click on icon of mp3 player and select format. This only applies to Windows-based computers.
You can also format the player in Windows Media Player itself:
Connect your Mp3 player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "name of Mp3 player here 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
-Tha Mp3 Doctor

Feb 25, 2008 | Sony Walkman Sport Series NW-S205F MP3...

1 Answer

Pearl mp3


This question is listed under the wrong device, but:
Here's what happened: When you first synced your player to Windows Media Player, you may have set up the automatic sync option. When this option is selected, Windows Media Player will add EVERY song, picture, etc from your Library on your computer to the player. Now, every time you sync you device, it adds every new file from your computer into the player automatically. It will even delete songs from your player that were on there before.

Go into Windows Media Player 11 with your player connected to the computer (it will automatically sync and add new files one last time), move the mouse cursor over to the sync tab; a small black arrow will appear under the word "Sync"; click on the small black arrow and a dropdown menu will appear; select "Portable media device" from the dropdown menu, and another dropdown menu will appear; select "Set Up sync"; a window will appear with some information on your device - uncheck the box that says "Sync this device automatically"; click Finish; This will eliminate the problem of Windows always adding/deleting songs/files you don't want into your player.

-Tha Mp3 Doctor

Dec 27, 2007 | Philips GoGear SA178 MP3 Player

1 Answer

UHG!


your computer has its own personal i-tunes for your i-pod and all your music is saved to that computer so if you plug your i-pod into someone elses computer it will eighther sync all thier music to your i-pod or it will erase all the music on your i-pod they dont have on thier computer...my sujjestion is to buy a plug in to the wall charger for your i-pod if your barely home to charge it. that way you keep your music yet charge your i-pod to.

Dec 26, 2007 | Apple iPod nano 2nd Generation MP3 Player

Not finding what you are looking for?
Audio Players & Recorders Logo

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Audio Players & Recorders Experts

Alan Matzke
Alan Matzke

Level 2 Expert

89 Answers

The Knight
The Knight

Level 3 Expert

75169 Answers

jason

Level 3 Expert

905 Answers

Are you an Insignia Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...