I've changed computers and I want to use my Polk Audio speakers from my old PC. I've connected the speakers and the sound is very low. I've tried all volume adjustments. Any recommendations?
hi Hubbell2008
And Happy Holidays
well, as you can see depending on your audio card, and output power, and sound settings on control panel, if is all up, or down.
you can try that first. But if not work is and Audio Card, type of power output, ....in that case you can change your audio card, if an onboard audio, place a PCI and will be ok, Creative labs models makes diff.
I have a mac powerbook and just got the Logitech X523 speakers. When I plug them into my headphone...
(More)
I have a mac powerbook and just got the Logitech X523 speakers. When I plug them into my headphone input on the laptop, they only work if I press very hard on the connector. Then when I let go - nothing. It just pops and cracks. I used an air can to clean it, still nothing. Its like there is something wrong with my headphone input. But when I plug regular headphones into my laptop - they work fine!
Also, when I plug the speakers into my iPod, using the exact same cable - they work fine.
What is going on here?
What is going on here?
can the splitter work fine , will the sound quality reduce in creatives 4.1 woofer system, i getting...
(More)
can the splitter work fine , will the sound quality reduce in creatives 4.1 woofer system, i getting sounds only in front speakers and not in rear , is there any jumper settings has to b done on the mother board , i have connected loosely in green port and the black port of the woofer system connected loosely to pink port of my system and then i am getting sounds in all system , is this the correct method?