Wireless printer won't print wirelessly.

Problem with wifi.

Well...HP models that have network capability have an "N" at the end of the model number. often those that have built-in wireless have a "W" somewhere as well.

Yours does not....so you cannot print DIRECTLY to the printer via Wireless LAN. You CAN however, connect it via a USB cable to a PC that is on your Network, (you must have wireless access to this network already for this to work, if not, then you have a whole different problem that is another question=How do I add "wireless" to my Local Area Network-LAN.)

Once the printer is properly installed, then you need to SHARE it to others on your Network. How this is done varies with what operating system you have...you did not tell us.

Tallon41

Hi there!
Normally on the printer itself, you can turn off the wireless functionality of it by going to Setup > Network > Wireless Radio. You can also press the Wireless Icon to get into the Setup settings.

Hope this helps!

If the printer doesn't already have network capability, you'll need to use a USB print server. Here's an example. You connect the server to one of the router's wired ports, and then any network computer (wired or wireless) will be able to print to the printer.

HP Photosmart D7360 is Not completely Wireless Capable, However if you want to make it Wireless, You will have to use HP bt450 Bluetooth Wireless.

However since this printer has Ethernet Port, you can still make this printer wireless.

You will have to connect this printer thru Ethernet cable ( network cable ) to Router ( this is called wired networking )

Once you have connected the printer to Router, insert the disk in CD Drive and start the installation process, It will prompt you to choose the type of Connection, Choose Wired/Wireless Network and continue with further installation to complete.

How this works,
With any PC that is connected Wireless to Router, You will be able to print wireless from the PC to Printer.

According to the manufacturer's web-site:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00870767&tmp_task=prodinfoCategory&lc=en&dlc=en&cc=ca&lang=en&product=3192753

this printer utilizes a USB interface, not a wireless interface.

Further, it is _not_ supported by the HP Wireless Print Server product.

The HP Photosmart 8050 is capable of using wireless when you purchase the HP Wireless Printing Upgrade Kit (Q6236A)

If the printer does not have a built-in network card/print server then there is a couple of ways to do this.
If you have a desktop computer connected to the wireless router with a LAN cable, then connect the printer to the desktop computer and make this printer a shared printer on your network. This means that the desktop computer and printer needs to be on when you want to print from the laptop.
The other way is to purchase a print server, connect the printer to the print server and connect the print server with a LAN cable to the Wireless router.
If you don't have sufficient network ports on the wireless router then you need to purchase a hub. Then connect the hub and wireless router with a LAN cable and then the print server to the hub and other computers to the hub.
Setting up the wireless printing will depend upon which method you want to adopt and I can advise you when further when you are ready.

need to hook up printer to computer. The software I had I threw it away. The printer model number is 4126-005. The serial number is 02320543500 2006/08.

Your printer can print wirelessly through bluetooth only.

note that your computer must be bluetooth capable also.

here's an instruction. Bluetooth Setup of Hp C5580