I need a manual for a dnec dterm80

The LCD screen of my DTerm80 was showing a "CAMP-ON" message along with someone else's name. I fixed it by pushing the "Exit" button then the second softbutton, under "Clbk", then the first softbutton, under "All". I received the message ""CLEAR CALLBACK CAMP CANCEL"

Fixed my problem.

To here ring types hit speaker then 711, then 1 for internal rings (select 2 for outside ring selection) then 1-8 the ring type.
To set ring type hit speaker then 720 (follow all the steps above).

Feature 69 feature

Hi zouganeli,

You can install one, two or three modules. Each memory module can hold a maximum capacity of 128 MB of standard SDRAM chips, or 256 MB of registered SDRAM chips so maximum memory capacity is 384 MB of standard SDRAM memory or 768 MB registered SDRAM memory.

Hope that helps

Take care,

Michael

Do a search for a plantronics headset. All of theirs work well with NEC

I have the 8 button phone and if you hook up your headset the right way you just have to press the line/feature access key all the way to the right instead of picking up the receiver. Keep the headset on all the time and just press that button to answer or hang up the calls. It works great! ( I have the Dterm80 telephone)

you must assign ringing in program mode. MB 4-01 day and 4-02 night. if this is an elite or ipk. If its ipk2 or 2000 than MB's are different. ldtsnj.com

Post the type and model # of your motherboard. I don't think there is any generic way to hook them up. You will need to find it in the manual. Have never seen a MB manual that does not show the pin placements.

How do I get the following off my display?
MSG >>> In-Mail #2