I have a Kenmore Series 90 top loading washing machine. When I start a wash cycle most times no water comes in. Immediately it starts the agitation cycle with no water in the tub. If I mess with the reset button for the load size the water will come in but fills to the top of the tub no matter what level is set. The water also does not come in when it gets to the rinse cycle unless I mess with the load size reset know. Is this a timer problem?
Comments:
Aug 26, 2009
- Well, I checked the wiring on the control panel but could not find any loose connections. I also checked the pressure tubing from the pressure switch to the bottom of the tub. No holes or cracks in the tubing. Could it be a problem with the pressure switch?
Well you eliminated the fill valve when you said it does fill with water. More than likely its a bad connection on the control board. I wouldn't betmy paycheck on it but thats where I'd start. Take the cover off the control board and while machine is on being really careful wiggle each wire until the water starts in the tub and you have found the problem.
Was this helpful?
Yes
No
Popular Solutions for GE WVSR1060A Top Load Washer
My washer makes funny noises when agitating and spinning, also is leaking water from the bottom. can...
(More)
My washer makes funny noises when agitating and spinning, also is leaking water from the bottom. can this be fixed at home or does it need a repairman
I have a Kenmore washing maching 90 Series 26902690 that when I start it the water fills very slow....
(More)
I have a Kenmore washing maching 90 Series 26902690 that when I start it the water fills very slow. Two days ago it was fine, then it got off balance and is now doing this. What should I do?
kenmore 90 series washer does not fill, does not agitate, will spin to remove water if in tub. Timer...
(More)
kenmore 90 series washer does not fill, does not agitate, will spin to remove water if in tub. Timer does not appear to run as dial does not advance.
Washer machine does not do its spin cycle at end of wash. Water pumps out and sounds like its...
(More)
Washer machine does not do its spin cycle at end of wash. Water pumps out and sounds like its trying to spin. I've replaced the belt. Is the transmission bad or would there be something else?