Question about Cisco (WS-X3011) Router

1 Answer

Point to Point T1 Using Cisco 2800 Routers?

Need a configuration (that works) to setup a Cisco 2811 connecting a 2821 router to pass T1 traffic between two PBX's. Both routers are on the same network and have VWIC-2MFT-T1 cards installed. The T1 connection will be used to connect two telephone system PBX's togather.
Example: PBX-1 to Cisco to IP to Cisco to PBX-2.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 107 Answers
Re: Point to Point T1 Using Cisco 2800 Routers?

Are you trying to set up router ?
You can set up your router manually, without the CD.
Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Posted on May 08, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

What collaboration capabilities are available on the new Cisco 2900 and 3900 Series routers?

According to my experience and knoledge: the Cisco 2900 and 3900 series platforms have collaboration feature parity with the Cisco 2800 and 3800 Series platforms, so all of the following collaboration capabilities and solutions are present:
• Cisco Unified Survivable Remote Site Telephony (SRST)
• Cisco Unified Border Element
• Time-division multiplexing public-switched-telephone-network (TDM PSTN) and private-branch-exchange (PBX) gateways
• VoiceXML contact-center gateways
• Cisco Unified Communications Manager (UCM) media resources (allowing conferencing, transcoding, and Media Termination Point [MTP])
• Resource Reservation Protocol (RSVP) Agent
• Cisco Unified Communications Manager Express (CME)
• Cisco Unified SIP Proxy
• Gatekeeper

Cisco 3900 Series Routers

Jun 25, 2014 | Routers

1 Answer

I am using 3g wireless router buyed from wifi digisol company. can anyone please help me to tell is this product is right for internet communication. for more details related to this product visit htt


Using 3g wireless Linksys Routers is best router you use for inter net connection,

For customers using the AT&T 3G MicroCell and a Linksys / Cisco router model WRT54G2 or equivalent, the following settings should be made to the router.

NOTE: Changing the broadband router / modem / gateway settings may cause other applications to stop working, and / or change the broadband router security settings for outbound data transmissions. Please see the router / modem / gateway instruction manual for more detailed information.

1.Open Internet Explorer and navigate to the router setup page at

2.Enter the User name and Password, click OK

3.Verify the following settings:

Automatic Configuration - DHCP
MTU: Auto
Size: 1492
Select the Security tab, verify IPSec Pass through is set to Enable


5.Click Save Settings


I Hope Your Router Linksys Routers Problem Is resolved By now:

In case you need online Linksys Routers help then follow us on for:

Linksys Router Support

Apr 02, 2014 | Linksys Routers

1 Answer

I need to connect cisco 2800 router to my pc

Follow this blog,may be it can help you.....

Feb 12, 2013 | Cisco 2800/3800 SERIES (NME-AIR-WLC25-K9=)...

1 Answer

Can Cisco do the equivalant of Nortel DISA

DISA can only be accomplished using Cisco callmanager and it's accompanying product unified contact center expresss.  You would have to build a custom script in contact center express to accomplish this.  If you are interested, please contact me @ for further info.

Sep 13, 2010 | Cisco 2821 Integrated Services Router...

1 Answer

E1 or T1 to pabx to router to softphone

Yes, configure second Cisco E1 port to simulate you telcom (network side) and connect it to PB, and first Cisco E1 to your telecom provider.

On Cisco router configure voice ports, and number manupilation, so you can catch any call and redirect it anywhere (Voip, Telco, PBX).

I tryed that with Ericcson, and it didn't work until connections where like these
telco <-> Cisco VoIP gateway (E1x2) <-> PBX

PBX's are not very flexible, Cisco is.

Jan 27, 2009 | Smart Modular 128MB SDRAM Module for Cisco...

1 Answer

Going wireless with a T1 Line

Going wireless should not be influenced by the nature of your internet connection. Here, I will assume that your definition of "standard router" is the kind of router we can buy at any electronic store (DLink, Linksys). I you are think more about a high end router such as a Cisco 2600 or 2800, please post a comment and I will adjust my answer.

If you already have internet access through your T1 using a wired network, you may just add one (or more) Wireless Access Points to your existing network. No need for a router here since you already have one for connecting the wired network.

On the other side, if your T1 line will be dedicated to your Wireless access, then a router should do the job. Usualy a T1 line uses a static IP address on the WAN side. If your Wireless coverage required more than one Access Points, then I would suggest you to use a standard router (no Wifi) with seperate access points.

Apr 20, 2008 | Routers

1 Answer

Difference between router


Type II routers are Wireless ADSL (Asynchronous Digital Subscriber Line) Routers.They are used as routers for connecting to the Internet Wi-Fi.(i.e)You may also call them as modem.Type II routers links a DSL to ISP(Internet Service Provider).You cannot change most of the Configuration of the type II routers, you allowed to change only few configurations.

Example ::
>>Cisco 3620

The Other Router like Cisco 1800 series /2800/ 3800/ 7600/ Catalyst 6500 Series, they are all Higher Routers, where u can configure and Program them, for connecting a LAN/WAN/MAN.

I hope is answered your question!!! Any more clarification, plz reply me!!

Thank YOU


Feb 18, 2008 | Routers

1 Answer

Cisco VPN Client won't connect

You'll want to enable the VPN transparency. In the router's administrative web interface, click the Security Tab, then the VPN Passthrough sub-tab. Cisco VPN's usually use IPSEC, so enable the IPSEC Pass-through and click "Save Settings". If this doesn't work enable the PPTP Pass-through as well and give that a shot.

Dec 31, 2007 | D-Link AirPlus Xtreme G DI-624 Wireless...

Not finding what you are looking for?
Routers Logo

Related Topics:

974 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Routers Experts

Martin Murray

Level 3 Expert

1614 Answers


Level 3 Expert

18258 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers

Are you a Cisco Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides