Question about Computers & Internet

2 Answers

Wirless connection cant connect using my wirless asking for security key / passphase. can somebody tell me how to retrieve this number?.

Posted by on

  • Anonymous May 22, 2009

    need network key

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 79 Answers

I think you asked this twice, but here is my suggestion:

this information is setup at the router (Access Point) and you will need to get the information from there.. Although there are ways to 'hack' this information, I will not tell you how to do this here, as we do not want to enable 'hackers'...

You need to hard wire the computer to the Access Point and enter the configuration of the device.. within it, you will find the SSID (name of the wifi network connection) and the type of encryption (WEP, WAP, etc.). From this page, you can discover the Passphrase or Encryped Password, which will allow you to access the WiFi connection.

Posted on Dec 04, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1.open up INTERNET EXPLORER
2. type in http://192.168.2.1/
3. Leave password blank and just click login
4. click on "wireless >> security" tab on left hand side
5. copy down the Key 1 , it looks like 7F.8A.0B.6D.00 or similar.

6. go to the wireless device and when prompted, juz enter the 7F.8A.0B.6D.00 with out the "."

Posted on Jan 14, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Whats a wpa key? I have tried connecting to my router on my wireless device and my wireless device ask's for a wpa key? is it the same as a lan key?


WPA <<===>> WIRELESS PROTECTED ACCESS

You need to use an Ethernet cable to connect a computer to the router, and then access the web-server inside the router, and then run the "Wireless Networking Setup Wizard". When you do, you will set:

* the SSID ("network name") -- pick anything you prefer
* the encryption-level (hint: use 'WPA')
* the password for the network -- pick anything you can remember

Then, from a wireless device, do a "View Available Wireless Networks".
Select the SSID, and enter the password, to make a connection.

Feb 01, 2011 | D-Link DIR-615 Wireless Router

2 Answers

Wont connect to internet


Secure is not there to re-assure you, its telling you the network is password protected & you need the password to connect. The wireless key will appear on the staus screen of your router. Connect using a wire, goto the router status screen & write down the wireless key, try to re-connect wirelessly.

Apr 04, 2010 | Belkin (F5D6051) 802.11b Wireless Adapter

1 Answer

Nb200 does not connect to wireless router ( dlink / virgin ) but will connect to neighbours unsecured wirless connection


you need to change your wirless settings.
I gues you have a high level security assigned to your router like WPA-PSK with a passphrase or WEP with 128 bit encryption.

Solution is :

Login to your router page and change the wireless security to WEP 64 bit and assign 10 digit number as a password in key 1. change your wireless name and click apply. and then try to connect to your own chnaged network.

Feb 26, 2010 | Computers & Internet

1 Answer

Invalid passphase, how do i reset it


Hi, the model number of the product which u have is FS105. Please note that this is just a wired switch and has nothing to do for wireless connection or passphrase. Let us know which wirless router is being used on your network?

Jul 06, 2009 | NetGear FS105 5x10/100 Mbps Networking...

1 Answer

When I secure my wirless network xbox live wont connect


If your xbox is also connecting wirelessly, you have to input also the wireless security key on your xbox to be able to connect.

Jun 29, 2009 | NetGear RangeMax WPN824 Wireless Router...

1 Answer

Cant connect to linksys


try goin in to the settings for the router it self. ip addres 192.168.0.1 make sure you got the right security key.

Jun 28, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

How to secure my wirless connection


You could set up a mac address filter with just your routers address or you could set up a wireless key that only your computer uses. Here is a quick tutorial:

http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx#3

Jun 18, 2009 | Belkin (F5D9230-4) Wireless Router...

1 Answer

Router asks for some kind of pin...


I have never heard of such. Sound like your computer is tring to get you to enter the WEP key or Passphase to access the router.
If you don't have a WEP key or Passphase setup on the router then you should just be able to click "ok" or "enter" (with the field blank) and bypass this screen.

Also check your network properties on the computer that is giving you trouble. Open your network connection, right click your wireless connection and click on "properties". Check the tabs and make sure you don't have WEP or secure network highlighted in one of the check boxes.

Jan 29, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Wireless connection


this information is setup at the router (Access Point) and you will need to get the information from there.. Although there are ways to 'hack' this information, I will not tell you how to do this here, as we do not want to enable 'hackers'...

You need to hard wire the computer to the Access Point and enter the configuration of the device.. within it, you will find the SSID (name of the wifi network connection) and the type of encryption (WEP, WAP, etc.). From this page, you can discover the Passphrase or Encryped Password, which will allow you to access the WiFi connection.

Dec 03, 2007 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

456 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Alun Cox

Level 3 Expert

2678 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...